T6 M2x10 conical Torx screws

Precision and durability in every tightening: Torx T6 M2x10 stainless steel countersunk screws

When working on the preparation of a slot car, the small details make the difference. A screw that does not tighten properly, that rusts, or that damages the housing can ruin hours of work on the bench. These M2x10 mm countersunk stainless steel screws with Torx T6 profile are designed precisely to avoid those problems.

Main features

• Material: stainless steel, resistant to corrosion and wear.
• Size: M2 x 10 mm.
• Head: countersunk, for a clean and flush finish.
• Drive profile: Torx T6, which distributes the torque better and reduces the risk of damaging the head compared to Phillips or flat profiles.
• Contents: bag of 20 units.

Function and applications

The M2 metric is one of the most common in the assembly of chassis, mounts, motor supports, and other components of 1/32 scale slot cars. The length of 10 mm provides sufficient grip on parts of certain thickness without over-tightening, which is especially useful when working with machined or printed chassis.

The countersunk geometry of the head allows the screw to sit flush with the surface once tightened, eliminating protrusions that may interfere with the body or other internal components of the car. A detail that is not minor in competition preparation.

Why Torx T6?

The Torx profile transmits torque more efficiently than a conventional star. With a well-calibrated Torx T6 wrench or screwdriver, the exact tightening is achieved without slipping that could damage the screw head or the housing in the part. For precision work where the car is frequently opened and closed — guide adjustment, braid replacement, motor inspection — this type of head considerably extends the lifespan of the screw and the assembly.

Assembly and preparation

Always use a quality Torx T6 screwdriver in good condition. If the housing in the part is plastic, apply the correct torque: stainless steel is harder than most polymers used in slot chassis, and excessive tightening can cause cracks. If the housing is in machined aluminium, you can work with greater confidence, although always with caution.

The bag of 20 units is practical for both the preparer working on a single car and for the workshop or club maintaining several active vehicles.

Frequently asked questions

What screwdriver is used for these screws?

They require a Torx T6 screwdriver or wrench. It is important that the tip is in good condition to avoid damaging the screw head during tightening.

Are they compatible with plastic chassis?

Yes, although with plastic it is advisable not to exceed the tightening torque. Stainless steel is considerably harder than the common thermoplastics used in slot chassis, so excessive tightening can damage the threading of the housing.

What length of screw does M2x10 serve?

The length of 10 mm is suitable for securing medium to high thickness parts within a 1/32 slot car, such as motor supports, mounts, or machined chassis elements. For finer connections, there are shorter versions available.

How many units does the bag contain?

The bag includes 20 units of Torx T6 M2x10 countersunk screws.

Why stainless steel and not carbon steel?

Stainless steel does not rust in humid environments and maintains its mechanical properties over time. For small precision parts that are frequently handled, it is the most durable choice.

Stainless steel M2x10 mm countersunk Torx T6 screws, designed for slot car preparation and chassis assembly. Pack of 20 units. A reliable choice for club racers, hobbyists and professional builders working on 1/32 scale slot cars. Compatible with machined aluminium and plastic chassis components. Reference SP153310, available at Ministry of Hobby.