T6 M2x12 conical Torx screws

Stainless Steel Torx T6 M2x12 Conical Screws: Precision and Reliability for the Demanding Builder

In slot car preparation, every detail matters. A screw of the wrong calibre, or made from a material that cannot withstand continuous vibration, can ruin hours of work on the bench. These stainless steel Torx T6 conical screws in M2x12 mm format are designed specifically to avoid that problem.

Main Features

• Material: stainless steel, resistant to corrosion and wear.
• Head Type: conical, for a flush and clean fit in the receiving part.
• Drive: Torx T6, which distributes the torque better than Phillips or flat heads, reducing the risk of slipping and damage to the head.
• Size: M2 x 12 mm.
• Contents: bag with 20 units.

Function and Performance

The conical head allows the screw to sit flush with the surface, which is especially useful when space is limited and any protrusion would interfere with other components of the assembly. The Torx T6 profile offers a secure grip with the screwdriver, facilitating controlled tightening without excess that could damage threads or technical plastic parts.

The stainless steel ensures that the screws maintain their mechanical properties over time, even in workshop environments with the presence of lubricating liquids or cleaners.

Compatibility and Installation

The M2 format is one of the most common in the world of slot preparation and modelling in general. Before installing them, always check that the receiving housing is compatible with the conical head: if the hole is cylindrical, the head will not sit flush and the result will not be as desired. It is recommended to use the appropriate Torx T6 screwdriver to avoid damaging the hexalobular shape of the head.

Common Mistakes

• Over-tightening in plastic threads: stainless steel is harder than most chassis materials, so it is advisable to adjust with care.
• Using an incorrect size Torx bit (T5 or T7): this can irreversibly damage the screw head.
• Confusing the conical head with the standard countersunk head without checking the angle: ensure that the housing is compatible.

Frequently Asked Questions

What are M2x12 conical screws commonly used for in slot cars?

They are used for securing chassis parts, motor mounts, axle supports, and other components where a flush profile and reliable fastening is needed without adding unnecessary height.

How many screws are included in the bag?

Each bag contains 20 units, sufficient for several preparations or to maintain a good stock in the workshop drawer.

What screwdriver do I need?

It is essential to use a T6 size Torx screwdriver or bit. Any other size may damage the screw head and make subsequent removal difficult.

Are they compatible with existing threads of other M2 screws?

Yes, the diameter and thread pitch of M2 are standard. The difference lies only in the type of head (Torx T6 conical), not in the thread itself.

Does stainless steel affect the total weight of the car?

In screws of this size, the weight difference compared to carbon steel is practically negligible. The advantage of stainless steel lies in its durability and resistance to oxidation.

Stainless steel conical Torx T6 M2x12 screws for slot car preparation and scale modeling. Pack of 20 units, ideal for chassis assembly, motor mounts, and axle supports. A reliable, long-lasting fastener solution for club racers, hobbyists, and serious builders working with 1:32 and 1:24 scale slot cars.