M2x5 conical Philips screws (x20)

M2x5 Countersunk Phillips Screws from Sloting Plus: the small detail that makes a difference in the workshop

In the preparation of a slot car, fastening elements rarely receive the attention they deserve. However, a screw that does not tighten properly, that rusts, or that gives way under vibration can ruin hours of tuning work. These M2x5 countersunk screws with Phillips head from Sloting Plus are made of stainless steel precisely to avoid that problem.

Technical specifications

• Metric: M2
• Length: 5 mm
• Head type: countersunk with Phillips drive
• Material: stainless steel
• Contents: bag of 20 units
• Reference: SP153205

Function and performance

The countersunk head allows the screw to sit flush or slightly recessed in the part, preventing it from protruding and causing mechanical interference. In slot applications, this is particularly useful in areas where the space between components is very limited: fixing bodies, chassis parts, mounts, and other elements where any protrusion can compromise movement or fit.

The stainless steel ensures resistance to corrosion, extending the lifespan of the part even under continuous use or prolonged storage conditions. Additionally, it maintains its tightening properties cycle after cycle, without easily deforming.

Assembly and preparation

To work correctly with these screws, it is recommended to use a Phillips screwdriver of the appropriate size for the M2 pitch, keeping the pressure aligned with the screw axis to avoid damaging the head slot. If screwing into plastic, it is advisable not to overtighten to avoid stressing the material. In metal or machined chassis, a firm but controlled tightening is sufficient.

Presented in a bag of 20 units, they are convenient to have in the workshop drawer without running short during preparation or repair.

Frequently asked questions

What are countersunk screws used for compared to cylindrical head screws?

Countersunk head screws are recessed into the material, sitting flush or below the surface. This eliminates any protrusion that could interfere with other parts, making them preferable in fine adjustment areas or where space is critical.

Are they compatible with all slot cars?

Compatibility depends on the hole where they will be mounted. Being M2x5, they fit into any threaded or drilled socket for metric M2. It is advisable to check the available depth to ensure that the 5 mm length fits each specific application.

Do I need any special tools?

No. A standard Phillips screwdriver of the appropriate size for M2 head is sufficient. Sloting Plus offers a range of tuning and preparation tools in its catalogue that perfectly complement this type of fastening element.

Can they be reused after several disassemblies?

Stainless steel offers good wear resistance, allowing for several cycles of assembly and disassembly without significant loss of performance. Nevertheless, if deformation is noticed in the head or thread, it is prudent to replace the screw with a new one, especially in elements of structural safety of the car.

Why 20 units?

In workshop work, it is common to need several screws of the same type for a single model or for several cars at once. The bag of 20 units allows for sufficient stock without accumulating an excessive number, providing a practical balance between quantity and price.

Sloting Plus M2x5 countersunk Phillips screws in stainless steel — pack of 20 units, reference SP153205. Essential workshop hardware for slot car preparation, chassis assembly and bodywork fixing. Compatible with M2 threaded fittings across a wide range of 1:32 and 1:24 slot cars. Stainless steel construction ensures long-lasting performance and corrosion resistance for dedicated club racers and home hobbyists alike.