Zero grip tyres 17x10

Slot.it Zero Grip 17x10 Tyres: Controlled Sliding for Fine-Tuning Your Setup

Within the Slot.it spare parts catalogue, the Zero Grip tyres hold a particular place: they are not designed to maximise grip, but rather to reduce it in a controlled manner. Under the reference SIPT15, these tyres in size 17x10 offer a contact surface with the track that has less adhesion than standard compound models, resulting in a more sliding and manoeuvrable behaviour.

Function and Performance

The term Zero Grip does not mean total absence of grip, but rather a reduced level of traction compared to regular competition tyres. This type of tyre is used in very specific contexts:

• Setup Adjustment on Sport Track: by reducing rear grip, the car tends to oversteer more easily, allowing exploration of chassis behaviour and adjustment of other parameters such as ballast or suspension.
• Technical Training: some drivers deliberately use them on the rear to practice control in lower traction conditions.
• Traction Balancing: when combined with higher grip tyres on the front axle, they can help balance the distribution of forces in the car.

The size 17x10 (17 mm outer diameter, 10 mm width) is compatible with a wide variety of cars from the Slot.it catalogue, especially those with standard rear rims of that dimension.

Compatibility

These tyres are part of the Slot.it spare parts system, designed for the Sport track (compatible with Scaleauto, among others). Before installing them, it is advisable to check that your car's rim accepts the 17x10 size and that the rear wing or fender does not interfere with the width of the wheel.

• Check the diameter and width of your model's original rim.
• Review the available space in the chassis before mounting.
• If you are looking for maximum performance in competition, consider whether the reduced grip level is suitable for your category or regulations.

Mounting and Preparation

The mounting process is standard for Slot.it tyres: apply pressure on the rim until fully seated, ensuring that the tyre is centred and free of deformations. If you plan to turn them, keep in mind that the Zero Grip compound may behave differently on the lathe compared to regular soft rubber tyres. A slight deburring of the edges can improve contact uniformity.

Considerations

Zero Grip tyres are not the usual choice for competition where the lowest lap time is sought. Their value lies in setup adjustment, preparation, and technical training. If you are looking for maximum grip, Slot.it offers other compounds within its spare parts range that are more focused on pure performance.

Frequently Asked Questions

What does "Zero Grip" mean exactly for these tyres?

It indicates a low-adhesion compound, not a total absence of grip. The aim is to provide a more sliding behaviour than standard tyres, useful for adjusting the setup or practising driving techniques with increased oversteer.

Which Slot.it cars are these 17x10 tyres compatible with?

They are compatible with Slot.it models that use a rear rim of 17 mm diameter and 10 mm width. Check the technical specifications of your specific model to confirm before installation.

Can they be used in official competition?

It depends on the regulations of your championship or club. Some formats allow free choice of tyres; others specify the type of compound permitted. Check this before using them in a race.

Do they require any preparation before use?

It is not mandatory, but a slight turning to ensure concentricity and edge deburring can improve performance. The Zero Grip compound may respond differently on the lathe compared to softer rubbers.

Do they work on Scalextric or Ninco (universal track)?

The tyre itself can be mounted on any car that has the appropriate rim, regardless of the track system. However, the behaviour on universal track may vary compared to the Sport track for which Slot.it cars are primarily designed.

Slot.it SIPT15 Zero Grip tyres 17x10 are a low-adherence compound option designed for setup tuning and technical training on Sport track systems. Compatible with Slot.it cars using standard 17x10 rear rims, these tyres provide a predictable sliding behaviour, ideal for chassis balancing and driving technique practice in 1/32 scale slot car racing.

Information Not Found

It has not been possible to verify additional data from official sources such as the number of units per bag, the exact material of the compound, or the complete list of Slot.it models compatible with this size. If you need confirmation of these details before your purchase, we recommend contacting us directly.