Low profile tyres 8.5mm (x4)

Avant Slot 8.5 mm Low-Profile Tyres: Four Units to Keep Racing at the Highest Level

When track performance starts to degrade, the condition of the tyres is often to blame. This pack of four low-profile 8.5 mm tyres from Avant Slot (ref. AV20316) is the specific replacement you need to restore the original grip of your car and return that precise feel in the corners that makes the difference between a decent time and a competitive time.

Function and Performance

The low-profile option is a common choice in setups aimed at competition or improving the dynamic behaviour of the car. By reducing the height of the tyre relative to the rim, the following is achieved:

• A lower centre of gravity, which enhances cornering stability.
• A more direct response to directional changes.
• A consistent contact patch with the track surface.

Avant Slot is a leading manufacturer in the slot racing world, recognised for both its resin cars and the quality of its spare parts. Its tyres are designed to fit the brand's models with the correct tolerances, ensuring a clean fit without the need for additional adjustments.

Compatibility and Installation

These tyres are designed as replacements for Avant Slot models that use this 8.5 mm low-profile size. Before placing your order, we recommend checking in your car's manual or technical sheet that this reference corresponds to the axle for which you need them (front or rear), as in many models both axles may have different sizes.

Installation is straightforward: remove the worn tyre from the rim, ensure the rim is clean and dry, and fit the new tyre, making sure it seats evenly around its perimeter. If the car is to compete, it is advisable to lightly sand the tread with fine sandpaper to equalise the diameter of both wheels on the same axle and ensure the car does not skid due to traction differences.

Common Mistakes

• Not verifying the correct size: there are several tyre references for different Avant Slot models. Always check that AV20316 is the one that corresponds to your car.
• Fitting tyres without cleaning the rim: remnants of old rubber or dirt can cause the new tyre not to seat properly and lead to vibrations.
• Forgetting to sand after installation: in competitive use, sanding is key to equalising diameters and achieving uniform traction.

Ideal for…

This pack is designed for both the enthusiast who wants to have a spare on hand before the current tyres fail mid-session, and for the preparer looking to experiment with different tread configurations in their setups with Avant Slot cars.

Frequently Asked Questions

How many units are included in the pack?

The pack contains 4 low-profile tyres of 8.5 mm.

Are they compatible with all Avant Slot cars?

Not necessarily. Avant Slot uses different tyre sizes depending on the model. Check your car's documentation to ensure that reference AV20316 is correct before placing your order.

Do they fit both the front and rear axles?

It depends on the specific model. In some cars, the size is the same on both axles; in others, it is not. Check your vehicle's technical sheet to confirm.

Is it necessary to sand the tyres after fitting them?

In recreational use, it is not strictly necessary, but in competition, it is recommended to equalise the diameter of the wheels on the same axle by lightly sanding the tread to avoid traction differences.

How often should I change the tyres?

It depends on the type of track, the intensity of use, and the type of rubber. When you notice that the car is losing grip or that the tyres show visible wear or deformation, it is time to change them.

Avant Slot AV20316 low-profile tyres 8.5 mm — pack of 4 replacement slot car tyres for Avant Slot models. These low-profile rubber tyres help lower the centre of gravity, improve cornering stability and restore grip on plastic or wood tracks. A must-have spare part for any serious slot car enthusiast running Avant Slot vehicles.