SC-3DP Racing Guide with Screw. Dimensions: 24.3x10mm

The Scaleauto SC-3DP Racing Guide: 3D Printed Precision for Wooden Tracks

The Scaleauto SC-1654D guide is a spare part from the 3DP Racing range, produced using 3D printing to ensure precise geometry and consistent response on the track. With measurements of 24.3 x 10 mm and a screw-fixing system, it is specifically designed for use on wooden tracks, the standard in club and competition circuits where the track requires a robust and well-fitted guide.

Each pack includes 2 units, so you have a ready spare from the outset or can prepare two cars at the same mounting standard.

Function and Performance

The guide is the component that keeps the car anchored to the track and transmits current from the braids to the motor. A well-sized and properly installed guide makes a difference in cornering stability, throttle response, and electrical continuity. The 24.3 x 10 mm geometry of this reference is designed to fit snugly in the track of wooden circuits, common in semi-professional and competition tracks.

Compatibility

This guide is developed by Scaleauto within its spare parts line for 1/32 scale. To confirm the exact compatibility with your specific chassis, consult the technical documentation from Scaleauto or the original assembly of the car in which you will install it. The screw-fixing system allows for quick changes in the pits without additional tools beyond a suitable screwdriver.

Installation and Preparation

• Remove the used guide by loosening the fixing screw.
• Check the condition of the braids before installing the new guide; this is the ideal time to inspect them.
• Insert the SC-1654D guide into the holder, ensure it is centred in the track, and tighten the screw without over-torquing to avoid deforming the printed part.
• Verify electrical continuity before putting the car on the track.

Common Errors

• Over-tightening the screw: this can create stress on the part and reduce the lateral swing freedom of the guide, worsening cornering performance.
• Not checking the braids when changing the guide: worn braids negate the benefits of the new guide.
• Using the guide on tracks for which it is not designed: this reference is specific for wood; in other systems, the fit may not be optimal.

Frequently Asked Questions

What type of track is this guide designed for?

It is specifically designed for wooden tracks, where the rail has different dimensions and finishes compared to plastic tracks like Scalextric or Carrera. Preferably use it on wooden circuits to take full advantage of its geometry.

How many units are included in the pack?

Each pack contains 2 units of the SC-1654D guide.

What does "3DP Racing" mean in the name?

It indicates that the part is manufactured using 3D printing. Scaleauto employs this technology in part of its spare parts line to achieve precise geometries and facilitate the production of specific parts for different applications.

Does the guide include the fixing screw?

The product name indicates that it is sold "with screw," so the fixing element is included. Check the contents of the pack upon receipt.

Is it compatible with any Scaleauto chassis?

Scaleauto guides are designed for their own chassis and cars in 1/32 scale, but the measurements and type of holder may vary depending on the model. Consult your car or chassis reference to confirm compatibility before installation.

Can I use this guide in competition?

Yes. Being part of Scaleauto's Racing range, it is aimed at track use, including competition sessions on wooden circuits. Verify that your championship regulations allow the use of this specific guide.

The Scaleauto SC-1654D is a 3D-printed racing guide (slot car guide blade) measuring 24.3x10 mm, designed specifically for wooden slot car tracks. Sold in a pack of 2 units, it features a screw-fixing system for quick and precise installation. A reliable 1/32 scale spare part for club racing and competition use on wood routed tracks.