Universal short axle guide

The short axle universal press-fit guide: precise contact on universal track

The SICH17 is a universal press-fit guide with a short axle, designed for direct mounting on slot cars running on universal track. Its press-fit fastening system facilitates installation and quick changes, which is appreciated both in workshop sessions and in the club paddock.

Function and performance

The guide is the point of contact between the car and the track: it directs the steering and, through the braids, transmits electrical current to the motor. A well-maintained and properly adjusted guide makes a difference in line stability, especially in tight corners and chicanes.

The short axle of this guide makes it particularly suitable for chassis with limited space in the front housing or for setups where the height of the guide relative to the car's lower plane needs to be reduced, thereby improving track performance.

Compatibility

As a universal guide, it is compatible with universal track systems, namely Scalextric and Ninco tracks, among others. Before mounting, check that your chassis housing accommodates the press-fit fastening system and that the short axle fits the available depth.

Mounting and preparation

• Remove the used guide by gently pulling down to release it from the housing.
• Insert the SICH17 guide into the housing until you hear or feel the press-fit engagement.
• Ensure that the braids make good contact with the guide's tabs before putting the car back on the track.
• Periodically check the wear of the lower pin: a worn guide increases resistance on the track and negatively affects handling.

Common mistakes

The most common mistake is installing a long axle guide on a chassis that requires a short axle, causing the car to rub against the track or not sit correctly. Always verify the axle length before placing an order. Similarly, do not force the press-fit engagement if you notice unusual resistance: it is better to check the chassis housing before damaging the part.

Frequently asked questions

What is the difference between a short axle guide and a long axle guide?

The length of the axle (the pin that enters the track) determines the guide depth in the track slot. The short axle is suitable for chassis with shallower housings or where the height of the guide needs to be minimized, while the long axle provides more directional stability in compatible chassis.

Which track systems is this guide compatible with?

Being a universal guide, it is compatible with universal track systems: primarily Scalextric and Ninco tracks. It is not designed for the Sport track of Scaleauto or Slot.it, which has different dimensions.

How do I know if I need to replace my car's guide?

If the car easily derails on straights or intermittently loses electrical traction, check the condition of the guide pin. A worn, bent, or excessively loose pin is a clear sign that it needs to be replaced.

Is it compatible with all braids on the market?

Standard slot braids fit most universal guides. Ensure that the tabs of the SICH17 guide have the correct diameter and spacing for the braids you typically use in your car.

The SICH17 is a universal press-fit slot car guide with a short axle, compatible with universal track systems such as Scalextric and Ninco. Ideal for slot car enthusiasts looking for a reliable and easy-to-install replacement guide. Essential spare part for club racing and home track use.