2 SHORT + LONG RAID GUIDES

Short and long Raid guides in one pack: choose the exact geometry for each track

The CXM063 pack brings together two Raid guides in a very practical format: one short and one long. Having both on hand allows you to directly compare track behaviour before deciding which fits best with your setup, without the need to place separate orders or wait to receive the missing part.

Function and performance

The guide is the fundamental contact point between the car and the track: it guides the trajectory, transmits current from the track to the braids, and largely determines stability in corners and the car's response to direction changes. Choosing the right length is not a minor detail.

• Short guide: offers less penetration depth into the track, resulting in a freer and more agile steering. It is usually preferred in cars with low geometry or on tracks with smooth transitions.
• Long guide: increases grip on the track, improving stability in fast corners and reducing the risk of derailment under high lateral loads. Highly valued in demanding traction or on technical tracks with sharp direction changes.

Compatibility

These Raid guides are designed to fit standard Raid-type guide housings. Before mounting, check that your chassis housing accepts this format and that the chosen length does not interfere with the track bed on the track where you will be competing or running regularly.

Assembly and preparation

Changing the guide is one of the simplest preparation operations, but it should be done carefully:

1. Remove the original guide by extracting the pin or retaining screw according to the chassis design.
2. Check the condition of the braids before mounting the new guide; this is the ideal time to replace them if they show wear.
3. Insert the new guide ensuring it sits correctly and has the appropriate lateral play: neither too loose nor blocked.
4. Perform a few gentle laps to verify that the guide slides smoothly and the braids make good electrical contact.

Common mistakes

• Mounting a long guide on a track whose rail does not have sufficient depth: this can cause the guide to rub against the bottom and increase resistance to forward motion.
• Not checking the braids when changing the guide, missing the opportunity to improve electrical transmission.
• Leaving the guide with insufficient lateral play, which stiffens the steering and can cause uneven wear.

Ideal for…

This pack is especially useful for enthusiasts preparing several cars with different configurations, for club preparers who want to have quick tuning options in the pits, or for those starting in slot preparation who want to understand firsthand how guide length affects track behaviour.

Frequently asked questions

What is the practical difference between the short and long guide on track?

The long guide penetrates more into the track and offers greater lateral grip, resulting in more stability in corners. The short guide allows for freer steering and usually favours agility in quick direction changes. The choice depends on driving style, track type, and overall car setup.

Are they compatible with Scalextric and Ninco tracks?

Scalextric and Ninco tracks correspond to the universal track system. Check the specifications of the Raid guide and the dimensions of your chassis housing to confirm compatibility before fitting.

Do I need to change the braids when installing these guides?

It is not mandatory, but it is highly recommended to take advantage of the disassembly to check their condition. Worn or dirty braids can negate the improvement that a new guide provides.

Can I use these guides in club competition?

It depends on your club or championship regulations, which may impose restrictions on the type or length of guide allowed. Check the rules before using them in a race.

Does the pack include braids or just the guides?

The CXM063 pack includes only the two guides (short and long). The braids are purchased separately.

The CXM063 pack includes one short Raid guide and one long Raid guide, giving slot car enthusiasts and club racers the flexibility to test both geometries and choose the best setup for each track. A practical solution for tuning guide depth, improving cornering stability, and optimising electrical contact through the braid. Compatible with standard Raid guide housings — check your chassis specifications before fitting.