LMP guide with screw for wooden track

Precision on the rail: the LMP guide with screw designed for wooden tracks

Wooden tracks have their own mechanical demands. The rail is deeper and the geometry of the slot differs from conventional plastic tracks, so the guide you mount makes a real difference in the car's behaviour. The LMP guide with screw (reference SICH112) is designed to address these particularities, offering firm support and stable current capture throughout each section of the circuit.

Function and performance

The guide is the component that anchors the car to the rail and transmits electrical current from the track to the motor braids. On a wooden track, where the depth and finish of the rail differ from plastic systems, having a specific guide prevents vibrations, loss of contact, and erratic behaviour in corners. The included screw facilitates a secure and tight mounting to the chassis, reducing unwanted play.

Compatibility

This guide is designed for cars with LMP-type bodies (endurance prototypes), a common silhouette in slot racing categories that replicate the 24 Hours of Le Mans or other long-distance events. Its use is indicated on wooden tracks, the preferred support in many clubs and racing circuits due to its greater construction precision and customisation possibilities.

Installation and preparation

• Remove the worn or original guide from the chassis before proceeding with the installation.
• Insert the new guide into the chassis housing and secure it with the included screw, without over-tightening to avoid damaging the plastic.
• Check that the guide drops freely to the bottom of the rail without forcing it.
• Connect the braids to the side contacts and verify that the friction is appropriate: neither too loose (loss of current) nor too tight (braking due to friction).
• Perform a few laps at moderate speed before demanding full performance from the car.

Common mistakes

• Using a standard guide on a wooden track: the dimensions do not always match, and the car may easily come off the rail or lose electrical contact.
• Over-tightening the screw: this can deform the chassis housing and limit the free movement of the guide, adversely affecting corner response.
• Not checking the condition of the braids: a new guide with worn braids does not solve contact issues.

Ideal for…

Enthusiasts and competitors racing on wooden circuits looking for a specific guide for LMP bodies. It is also of interest to those who meticulously prepare cars and do not want to leave any detail to chance before a club racing session.

Frequently asked questions

Is this guide compatible with plastic tracks like Scalextric or Ninco?

It is specifically designed for wooden tracks. While it may physically fit other systems, its geometry is optimised for wooden rail, which typically has different dimensions than universal plastic tracks.

Does the screw come included in the pack?

Yes, as indicated by the product name, the guide is sold with its mounting screw included.

What type of LMP bodies does this guide accept?

As a generic replacement guide for LMP prototypes, it is compatible with most chassis designed for this type of silhouette. We recommend checking the dimensions of your chassis housing before installation.

How often should I check or change the guide?

It depends on usage. In competitive sessions or intensive running, it is advisable to check the guide after each day. Common signs of wear include excessive play in the rail, intermittent loss of current, or visible wear marks on the sides of the guide.

Can I use it with any braid on the market?

Generally yes, as long as the braid is of the appropriate width and thickness for the side contacts of the guide. Check your chassis specifications to confirm the recommended measurements.

The SICH112 LMP guide with screw is a slot car replacement part specifically designed for wooden track systems, where standard guides often fail to provide consistent rail contact. Compatible with LMP-style chassis, it ensures stable electrical connection through the braids and reliable lane tracking during club racing sessions. A straightforward but essential upgrade for any slot racer running on a routed wooden circuit.

Information not available

We have been unable to confirm with official sources the manufacturer brand of this reference (SICH112) or its exact dimensions (height, blade width, screw diameter). If you need this data before placing your order, please do not hesitate to contact our team.