LMP guide with screw

The SICH84 LMP guide with screw: precision in every corner for your Slot.it prototypes

When you seek reliability on track, the small details make the difference. The SICH84 guide from Slot.it is specifically designed for LMP category cars, offering a secure screw fixation that guarantees a stable position and optimal contact with the track at all times.

Function and performance

The guide is the element that keeps the car anchored to the track and transmits the electrical current from the braids to the motor. A well-adjusted guide reduces disconnections, improves response to controls, and provides a more predictable driving experience, especially on technical circuits with many consecutive corners.

The screw fixation system of the SICH84 allows for easy tightening or loosening of the guide, facilitating both assembly and fine adjustment of the pitch during setup. This is particularly useful during tuning sessions before a club day or championship race.

Compatibility

This guide is designed for Slot.it LMP chassis, the usual reference on Sport track systems like those from Scaleauto. If you are using universal track systems —Scalextric or Ninco— it is advisable to check the track width before installation, as the dimensions of the guide are optimised for the Sport standard.

Installation and preparation

• Remove the previous guide by carefully unscrewing the fixation screw to avoid damaging the chassis housing.
• Align the SICH84 with the longitudinal axis of the car before tightening.
• Ensure that the braids make proper contact with the conductive strips of the guide before putting the car on track.
• Adjust the screw tightness according to the desired pitch setting: tighter for a stiffer guide; slightly looser if you seek greater freedom of movement in corners.

Common mistakes

Over-tightening the screw can block the natural movement of the guide and increase disconnections in corners. Conversely, leaving it too loose causes the guide to rotate excessively and the car to lose its line. Find the balance point by testing on track with progressive adjustments.

Another common mistake is not checking the condition of the braids when changing the guide: take the opportunity to replace them if they show wear, as a new guide with worn braids will continue to cause contact issues.

Frequently asked questions

Which Slot.it cars is the SICH84 guide compatible with?

It is designed for Slot.it LMP chassis. If you have doubts about compatibility with a specific model, consult the exploded diagram of the chassis on the official Slot.it website or in the technical sheet of your car.

Can I use this guide on universal tracks like Scalextric or Ninco?

The SICH84 guide is optimised for the Sport track standard (Scaleauto, Slot.it). It physically fits universal track, but we recommend checking it before racing, as tolerances may vary.

Do I also need to change the braids when installing this guide?

It is not mandatory, but highly recommended. If the current braids have been used for several sessions, installing a new guide is the ideal time to renew them and ensure clean electrical contact from the very first moment.

What tool is used to mount the fixation screw?

A flat-head screwdriver or a precision screwdriver is usually used, depending on the type of screw head included. Check the set upon receipt to use the appropriate tool and avoid damaging the head.

When should I replace the guide?

When you observe visible wear on the conductive strips, frequent loss of contact that is not resolved by changing the braids, or excessive play in the chassis housing. A guide in good condition is essential for consistent driving.

The Slot.it SICH84 LMP guide with screw is an essential spare part for slot car enthusiasts running LMP prototypes on Sport-standard tracks. Compatible with Slot.it and Scaleauto lane systems, this guide ensures stable contact and easy fine-tuning during setup. A must-have replacement part for competitive slot car racing at club level or home layouts.