Replacement Tip M2.5 (1.3mm)

The replacement tip that keeps your torque screwdriver operational

The torque screwdriver Scaleauto SC-5080 is a reference tool in the setup of slot cars, and like any precision tool, its tips are subject to wear with continued use. The Replacement Tip M2.5 (1.3 mm) SC-5081B is the official replacement from Scaleauto to always keep this tool operational without interrupting your work at the preparation bench.

Function and features

• Size: M2.5 with a shank of 1.3 mm, the exact specification for the SC-5080.
• Manufactured to ensure the correct functioning of the torque setting of the original screwdriver.
• Official Scaleauto replacement, ensures compatibility and a perfect fit in the bit holder.

Compatibility

This tip is a direct replacement for the torque screwdriver Scaleauto SC-5080. If you use this screwdriver in your slot workshop, having one or more spare tips prevents unexpected downtime during the preparation of your car.

Installation and preparation

Changing the tip on the SC-5080 is simple and quick. Just remove the worn tip from the bit holder and fit the new one until it is properly seated. From that moment on, the torque wrench will work again with the tightening precision for which it was calibrated, essential when adjusting chassis screws, crown gears, or motor mounts where the exact torque makes the difference between fine tuning and a damaged component.

Common mistakes

• Using the tool with a worn tip: a damaged tip can slip and damage the screw head or alter the torque reading.
• Replacing it with generic tips: tips of similar sizes but not approved for the SC-5080 may not fit correctly in the bit holder and compromise tightening precision.

Frequently asked questions

Which screwdriver is this tip compatible with?

It is the official replacement for the Scaleauto SC-5080 torque screwdriver. It is not intended for other models unless expressly specified by the manufacturer.

When should I change the tip?

When you notice it slipping on the screw head, that it has lost sharpness on the edges, or that the fit in the bit holder is loose. With intensive use in preparation sessions, it is advisable to always have a spare unit on hand.

Does the condition of the tip affect torque accuracy?

Yes. A worn tip can cause the torque not to be transmitted correctly to the screw, which negates the main advantage of the torque screwdriver: to always apply the same tightening torque.

Does the reference SC-5081B include several tips or is it a single unit?

According to the information provided by Scaleauto, the reference SC-5081B corresponds to the replacement tip M2.5 (1.3 mm). For the exact number of units per reference, please check the product sheet in our store or contact us.

The Scaleauto SC-5081B is the official replacement tip (M2.5, 1.3 mm) for the Scaleauto SC-5080 torque screwdriver, an essential slot car preparation tool. Keeping a spare tip ensures uninterrupted tuning sessions and accurate torque application on chassis screws, crown gears and motor mounts. Compatible exclusively with the SC-5080 handle.