Side-Anglewinder crown holder 14-19mm

Side-Anglewinder Crown Holder 14-19 mm: Preparation Part for Anglewinder Setups

This crown holder from 3DSRP (reference SRP018202) is designed for enthusiasts and tuners working with anglewinder motor configurations —motor positioned at an angle to the rear axle— or sidewinder —motor parallel to the rear axle—. Its compatibility range with crowns of 14 to 19 mm makes it versatile for different gear ratios and track applications.

Main Features

• Material: PLA plastic, manufactured using 3D printing with FDM technology.
• Compatible Crown Range: from 14 to 19 mm in diameter.
• Mounting Type: Side-Anglewinder (also suitable for sidewinder configurations depending on the chassis).
• Colours: various available, supplied randomly.
• Manufacturer: 3DSRP.

Function and Performance

The crown holder is the component responsible for keeping the drive crown properly aligned and secured to the motor pinion. In anglewinder setups, where the motor operates at an angle, good retention of the gear is key to avoiding play, noise, and efficiency losses in the transmission. This crown holder from 3DSRP performs this function simply and effectively thanks to the tolerances achieved with FDM printing in PLA.

PLA is a lightweight material, sufficiently rigid for slot preparation use and easy to replace if wear or an impact requires it, which perfectly aligns with the philosophy of 3D printed accessories: low replacement cost and high availability.

Compatibility and Installation

Covering a range of 14 to 19 mm, this crown holder is suitable for a wide variety of common crowns in the slot market. Before installation, check that the diameter of your crown falls within this range and that the geometry of your chassis allows for side-anglewinder mounting. If you have doubts about compatibility with your specific chassis, please consult us before placing your order.

Common Errors

• Trying to force a crown outside the 14-19 mm range: this can lead to poor fitting and vibrations during operation.
• Confusing anglewinder mounting orientation with inline: in anglewinder, the motor is at an angle to the axle, not in line with it.
• Not checking the pinion-crown alignment after installation: a small angular misalignment can result in noise and premature wear.

Frequently Asked Questions

What crowns is this crown holder compatible with?

With crowns ranging from 14 to 19 mm in diameter. Outside of this range, a proper fit is not guaranteed.

Will the colour I receive be the same as in the photos?

Colours are supplied randomly. If you have a preference for a specific colour, we recommend consulting us before placing your order, although we cannot always guarantee availability of a specific colour.

Is it suitable for competitive use or just for recreational use?

As a PLA printed part, it is perfectly valid for use in club and regular competition sessions. For high-demand categories, frequently assess the condition of the part and replace it if signs of wear appear.

Is it compatible with inline motors?

This crown holder is designed for side-anglewinder and sidewinder configurations. In inline setups —motor perpendicular to the rear axle— the transmission geometry is different, and this part may not be suitable.

Do I need special tools to install it?

No special tools are required. Standard slot preparation tools (precision screwdrivers, fine-tipped pliers) are sufficient for proper installation.

The 3DSRP SRP018202 Side-Anglewinder crown holder is a 3D-printed PLA part designed for anglewinder and sidewinder slot car chassis setups, compatible with crowns ranging from 14 to 19 mm in diameter. Manufactured using FDM technology, it offers a lightweight and cost-effective solution for slot car preparation and tuning. Available in assorted colours. A reliable choice for club racers and hobby enthusiasts looking for affordable slot car parts and accessories.