Track cleaner

Keep your tracks clean and protected with this specific slot track cleaner

With continuous use, any slot track accumulates a layer of dirt that is hard to ignore: environmental dust, moisture, oils, tyre residue, and above all, the deposits of tin and other residues left by the braids rubbing against the rail session after session. The result is uneven driving, electrical contact loss, and, in the long term, rail oxidation. The SP120201 Track Cleaner from Sloting Plus addresses all these issues at once.

Function and performance

This cleaner works on two fronts simultaneously:

• Deep cleaning: dissolves and removes deposits of dust, grease, tin, and other residues accumulated on the rail, returning a clean surface that promotes electrical contact and traction.
• Anti-oxidation protection: once applied, it leaves a protective layer that delays the appearance of rust, especially useful in environments with high humidity or tracks that are stored for extended periods.

Step-by-step application method

1. If the rail shows visible rust, remove it beforehand and clear any loose debris before applying the product.
2. Gently shake the bottle and place four or five drops on a clean cotton cloth.
3. Wipe the cloth along the rail in sections of approximately one metre, advancing as the dirt adheres to the fabric.
4. Always use a clean area of the cloth for each pass; never drag the dirt already collected back onto the rail.
5. Once the entire section is clean, make a final uniform pass and let the product rest for approximately three hours for the protective layer to settle.
6. Repeat this operation three or four times a year, or whenever you notice a significant accumulation of dirt.

Compatibility and applications

The cleaner is suitable for the metal rails present in the main track systems on the market. Whether you have a universal track —common in brands like Scalextric or Ninco— or you work with sport rail systems found in Scaleauto or Slot.it, the application method and results are the same. It is also equally valid for modular tracks from manufacturers like Carrera.

Usage recommendations

• Work in a ventilated space when applying the product.
• Use only cotton cloths; synthetic fibres may leave residues that interfere with the rail.
• Do not apply excessively: a few drops are sufficient for one-metre sections. More quantity does not mean better results.
• If the track has not been used for a while and the level of dirt is high, it may be necessary to repeat the process twice before the final resting time.
• Store the bottle tightly closed and upright, away from heat sources.

Frequently asked questions

How often should I clean the rails of my track?

Sloting Plus recommends performing a complete cleaning three or four times a year under normal usage conditions. If you notice contact losses, frequent power cuts, or that the cars are running unevenly, it is a sign that the rails need attention before the next scheduled cleaning.

Is it necessary to wait three hours before racing again?

Yes. That resting time allows the anti-oxidation protective layer to form correctly on the rail. If you run the cars before, you will drag the product before it has fulfilled its protective function.

Can I use this cleaner on the braids of the cars as well?

The product is specifically formulated for the track rails. For cleaning braids, there are specific products and methods; we recommend not interchanging uses to avoid compromising the results on either element.

Is it effective for removing severe rust or just for preventive maintenance?

For a light or moderate layer of rust, the cleaning process with the cloth is usually sufficient to remove it. If the rust is very pronounced, the manufacturer indicates that it is advisable to remove it by mechanical means before applying the product and then use the cleaner to finish cleaning and protecting the rail.

Does the product leave residues that could affect driving?

No, as long as it is applied in the indicated amount (four or five drops per section) and the resting time is respected. The final pass with a clean cloth and the drying time ensure that the rail is in optimal condition for driving.

Sloting Plus slot car track cleaner SP120201 — two-in-one formula that deeply cleans and protects the metal rails of any slot car track. Removes dust, grease, tyre residue and tin deposits left by braids, while leaving an anti-oxidation protective layer. Compatible with Scalextric, Ninco, Slot.it, Scaleauto and Carrera track systems. Essential maintenance product for home layouts and club circuits alike.