LIGHT Super-Slippery Grease "Magic Grease" 15ml

Less friction, more speed: Scaleauto's Magic Grease in 15 ml format

When preparing a slot car, every friction point matters. The Light Super-Slick Grease Magic Grease SC-5303 from Scaleauto is specifically designed to minimise friction in the most delicate mechanical contact areas: rear and front axles, gears, pinions, crown gears, and any other moving parts that require a fine and effective lubricant.

Main features

• Light formulation: reduced viscosity to avoid hindering the movement of small, high-speed components.
• Super-slick effect: reduces friction between continuously contacting metal and plastic surfaces.
• 15 ml format: sufficient quantity for multiple maintenance and preparation sessions.
• From Scaleauto: a benchmark brand in competition slot accessories and spare parts, with extensive experience in the technical preparation segment.

Recommended applications

The Magic Grease is intended for use at critical points of the slot car's drivetrain and steering:

• Rear and front axles, at the supports on the bench or chassis.
• Transmission gears: pinion and crown, especially at the contact point between teeth.
• Guides and any articulated part that requires smooth movement without accelerated wear.
• Bearings when seeking a light complement to factory lubrication.

Behaviour and performance

Too dense a grease can trap dirt and create an undesirable braking effect. The light formulation of the Magic Grease precisely avoids this: the lubricant settles where it should, creates a protective film without excessive accumulation, and helps ensure that power transmission is as direct and efficient as possible. The result is noticeable on the track: cleaner starts, less heat generated in the gears, and greater durability of treated components.

Assembly and preparation: usage tips

• Apply a minimal amount: a drop at each contact point is sufficient. Excess attracts dust and can contaminate the braids or tyres.
• Clean the parts to be treated beforehand to remove any residue of old grease or accumulated dirt.
• On the gear, apply to the teeth of the pinion before mounting and let the car run at low speed for a few seconds to allow the grease to distribute evenly.
• Avoid contact with the tyres and track: any trace of lubricant on the tread compromises traction.

Common mistakes

• Using too much quantity: more grease does not mean better results. The lubricant film should be thin.
• Not cleaning before lubricating: applying Magic Grease over dirt or degraded grease reduces its effectiveness and can accelerate wear.
• Confusing it with engine oil: Magic Grease is a light grease, not a fluid oil; it is formulated to stay at the application point without migrating.

Frequently asked questions

Is it compatible with plastic chassis and metal parts?

Yes. Magic Grease is formulated to work on the common materials used in slot car construction: metals (steel axles, brass or zamak gears) and engineering plastics found in chassis and supports.

Can I also use it on bearings?

It can be applied to bearings as a complement, although in that case many preparers prefer a very fluid oil. Magic Grease works especially well on axle supports without bearings and at the pinion-crown contact.

How often should I lubricate the car?

It depends on usage and track type. As a reference, a lubrication check every two or three intense running sessions is common among enthusiasts. In competition, many racers check the gears before each important heat.

Can the grease affect tyre grip?

Only if it reaches the tread. Always apply precisely and clean any excess before putting the car on the track. This is basic care with any lubricant in slot.

Is the 15 ml format enough for several cars?

Since applications require very small amounts per point, 15 ml is sufficient for a high number of maintenance sessions, even in a small collection of cars.

The Scaleauto Magic Grease SC-5303 is a light super-slick lubricating grease designed for slot car preparation and maintenance. Its low-viscosity formula reduces friction on axles, gears, pinions and crown wheels, helping deliver cleaner power transfer and longer component life. A must-have in any slot car workshop, compatible with metal and plastic parts across all major slot systems.