Speed Oil-5

Speed Oil-5, the ceramic lubricant from Scaleauto for demanding bearings

The Speed Oil-5 (SC-5314) is Scaleauto's proposal for those seeking a high-performance lubricant aimed at the care of bearings in competition slot cars. Its high-viscosity formula with ceramic nanoparticles and ultra-slippery anti-friction additives offers a drastic reduction in friction compared to conventional oils, directly contributing to improving the mechanical efficiency of the assembly.

Main features

• Ceramic formula: ceramic nanoparticles that drastically reduce friction between contacting surfaces.
• Anti-friction and ultra-slippery additives to maximise bearing performance.
• High viscosity, especially suitable for ball bearings, brass and bronze bushings.
• High temperature resistance, key in long sessions or motors that generate more heat than usual.
• 20 ml bottle, a sufficient format for prolonged maintenance given the moderate use required by this type of product.

Recommended applications

The Speed Oil-5 is designed for lubricating bearings of any type: ball, brass or bronze. It is common to use it both in the initial assembly of a slot car and in maintenance checks prior to a competition. When applied correctly, it helps the axles to turn with less resistance, resulting in a cleaner motor response and, ultimately, better lap times.

It is also useful in the preparation of chassis, where the freedom of rotation of the rear axle is crucial for track performance.

Behaviour and performance

The key to this oil lies in the ceramic nanoparticles it contains in suspension. These particles deposit on metal surfaces forming a protective layer that reduces long-term wear. For this reason, Scaleauto recommends shaking the bottle vigorously before use, to ensure that the nanoparticles are evenly distributed in the mixture and do not remain settled at the bottom.

The high viscosity differentiates it from the more fluid oils in the range: it retains lubrication in the bearing for longer, which is particularly appreciated in ball bearings subjected to high speeds.

Usage recommendations

• Shake the bottle vigorously before each application to homogenise the suspended ceramic nanoparticles.
• Apply a small and precise amount: in ball bearings, a few drops are more than sufficient. Excess oil can attract dust and impair performance.
• Clean the bearing before lubricating if it has been in use for a while, to remove residues from the previous oil.
• Repeat the application according to the frequency of use and the type of competition: periodic maintenance significantly extends the life of the bearings.

Frequently asked questions

What type of bearings is Speed Oil-5 designed for?

It is formulated for ball bearings, brass and bronze bushings, the most common in prepared and competition slot cars.

Why should the bottle be shaken before use?

The formula contains ceramic nanoparticles in suspension that tend to settle over time. Shaking the bottle vigorously before each use ensures that those particles are evenly distributed and that the oil functions as intended.

What differentiates this oil from a conventional one?

The presence of ceramic nanoparticles and ultra-slippery anti-friction additives distinguishes it from standard lubricants: it not only reduces friction at the time of application but also protects metal surfaces against continuous wear and better withstands the high temperatures generated in demanding sessions.

How much oil should I apply?

Very little. In ball bearings, one or two drops are sufficient. Excess lubricant does not improve performance and can attract dust particles that ultimately generate more friction than it prevents.

How often should I lubricate the bearings?

It depends on usage. In regular club competition, a check before each session is a good practice. In recreational use, every few sessions or when it is noticed that the axle does not turn as smoothly as before.

Is it also suitable for other elements of the slot car?

Scaleauto specifically recommends it for bearings. For other lubrication points of the car, such as pinions or crown gears, there are specific products in the range with viscosities adapted to each application.

Scaleauto Speed Oil-5 SC-5314 is a high-viscosity ceramic lubricant oil designed for ball bearings, brass and bronze bushings in slot cars. Its formula includes ceramic nanoparticles and anti-friction additives that drastically reduce friction, extend bearing life and withstand high temperatures. Shake well before use to ensure an even distribution of the ceramic nanoparticles. 20 ml bottle. Compatible with all slot car bearing types used in competitive and club racing.