BM4 GT3 Schubert Motorsport n11 DTM 2024

The Schubert Motorsport BMW M4 GT3 arrives on your track in the most faithful version of the 2024 DTM

Sideways presents the reference SWCAR09B, the 1/32 scale recreation of the BMW M4 GT3 #11 with which Marco Wittmann competed in the 2024 Deutsche Tourenwagen Masters under the colours of the Schubert Motorsport team. A model within the GT Modern category that, as is customary with Sideways, combines high-fidelity finishing with competition-ready mechanics from the first moment.

Features and Highlights

• Baby Raptor 17,000 RPM Motor: quick response, strong torque, and precise braking, designed to demand maximum performance at every braking point.
• Anglewinder mount with 0.7 mm offset (red): the motor is mounted at an angle relative to the rear axle, a design that concentrates mass near the centre of the car and favours stability in fast corners.
• 11/28 tooth transmission: balanced pinion/crown gear ratio for a good compromise between acceleration and top speed.
• Front (55.5 mm) and rear (56.5 mm) axles with adjustable front axle height for fine-tuning according to the type of track.
• Wheels with air system: the rear wheels (17.3 × 10 mm) incorporate Sideways' Air System, allowing adjustment of the wheel hardness to modulate grip. The front wheels measure 17.3 × 8.2 mm.
• Prospeed medium (22 shore) tyres on the rear axle and ultra-hard (70 shore) on the front: classic competition combination that offers rear grip without sacrificing steering response.
• Officially licensed BMW body and detailed interior that reproduces elements of the real cockpit.

Scale and Level of Detail

At a scale of 1/32, the Sideways M4 GT3 reflects the aggressive aerodynamics of the real car: the large rear wing, side pods, diffusers, and Schubert Motorsport team livery are reproduced with a fidelity that satisfies both collectors and club racers. The bodywork is officially licensed by BMW, ensuring that the proportions and graphic details correspond to the original.

Track Behaviour

The anglewinder configuration places the motor in an intermediate position between sidewinder and inline, resulting in a low centre of gravity and a mass distribution favourable for tight corners. Combined with the rear Prospeed medium tyres, the car offers consistent grip without becoming excessively sticky, facilitating control on tracks with long straights and chicanes. The adjustable front axle height allows fine-tuning of the geometry according to the characteristics of the track where it will compete.

Ideal for…

• Club racers looking for a competition-ready modern GT ready-to-run without the need for additional preparation.
• Collectors interested in the 2024 DTM and the figure of Marco Wittmann, two-time champion of the German championship.
• Enthusiasts wanting to start in the Sideways range with a technically complete model and a good base of available spare parts.

Points to Consider

Like the rest of the Sideways range, this model is made from high-precision plastic; Sideways does not work with resin in its mass-produced cars. The guide and braids are compatible with universal track (Scalextric, Ninco) and Sport track (Scaleauto, Slot.it), although it is advisable to check the guide height if used on tracks with very disparate specifications.

Frequently Asked Questions

What type of motorisation does the SWCAR09B have?

It features an anglewinder configuration: the motor is positioned at an angle relative to the rear axle. This differentiates it from both the sidewinder (transverse motor, parallel to the axle) and the inline (longitudinal motor, perpendicular to the axle). The mount has a 0.7 mm offset in red.

What are the wheels with air system (Air System)?

The Sideways air system allows modification of the internal pressure of the wheel to vary its effective hardness. This directly affects grip and car response, without the need to change the tyre. It is especially useful for adjusting behaviour between different track conditions.

Which tracks is it compatible with?

The model is compatible with universal track (Scalextric, Ninco) and Sport track (Scaleauto, Slot.it). If you have doubts about the guide height on your track, you can easily adjust it before running.

Does it require preparation before use?

No. It comes configured as ready-to-run, with all competition components factory-mounted. You can run it directly or adjust the front axle height according to your track to optimise performance.

Is it suitable for collectors or just for competition?

It is valid for both uses. The officially licensed BMW body, the Schubert Motorsport team livery, and the level of detail in the interior make it attractive as a collectible piece, while the competition mechanics position it as a car perfectly usable on club tracks.

Are spare parts available for this model?

Sideways maintains a spare parts catalogue for its models, including Prospeed tyres, Air System wheels, Baby Raptor motors, and anglewinder mounts. Check availability in our Sideways components catalogue.

The Sideways SWCAR09B is a 1/32 scale slot car replica of the BMW M4 GT3 fielded by Schubert Motorsport in the 2024 DTM season, driven by two-time champion Marco Wittmann with car number 11. This ready-to-run model features a Baby Raptor 17K motor, a 0.7 mm offset anglewinder motor mount, an 11/28 gear ratio, Air System rear wheels paired with Prospeed medium tyres (22 shore), and ultra-hard front tyres (70 shore). Officially licensed BMW bodywork, detailed interior, and an adjustable front axle height make it a compelling choice for both club racers and GT Modern collectors.