Open Flat 6-20k motor

Power and control in a compact format: the Flat 6 from Slot.it in open long can

The Flat 6 (SIMN09ch) motor from Slot.it is one of the most well-known references within the Italian brand's motor range. Its open long can configuration sets it apart from the closed versions and makes it an interesting option for builders who prefer to integrate their own braids or easily access the interior of the motor during maintenance.

Main features

• Speed: 20,500 RPM at 12v
• Torque: 200 g·cm at 12v
• Rear axle length: 8 mm
• Can: open long
• Wires: not included

The balance between speed and torque means that this motor is not an uncontrolled pure speed unit, but rather a versatile unit that can be worked with in different transmission configurations without sacrificing cornering response.

Recommended applications

The Flat 6 naturally fits into chassis that mount Slot.it motors in inline or sidewinder positions, depending on the mechanical assembly design. Its long can facilitates anchoring in prepared mounts for this format, and the 8 mm axle offers room to adjust pinions and the spacing relative to the differential or crown gear.

It is a common motor in club categories with motor restrictions, and also a popular choice for conversions and preparations of closed-body cars where a progressive and reliable response is sought session after session.

Behaviour and performance

With 20,500 RPM at 12v, the Flat 6 sits in a medium-high performance range, away from extreme attack motors. This translates into easier management while driving, especially on tracks with fast or medium-radius corners, where the available torque allows for strong exits without the need for excessive precision in modulation.

The open can design also favours heat dissipation during long sessions, an aspect to consider when the motor operates for several heats in a row.

Usage recommendations

As it does not include wires, it is necessary to solder the braids directly to the motor terminals before assembly. We recommend using braids of appropriate gauge for the expected current draw and respecting polarity to avoid the motor spinning in the opposite direction to what is expected.

Before installing the motor, it is advisable to check that the 8 mm axle is correctly aligned with the chosen transmission. A small misalignment can generate vibrations and performance loss that are not always evident at first glance.

Frequently asked questions

Does this motor include wires to connect it to the car's electrical circuit?

No. The motor is supplied without wires. Braids must be soldered directly to its terminals during assembly.

What is the difference between the long can and short can in Slot.it motors?

The long can offers greater overall motor length, which affects the space it occupies within the chassis and compatibility with certain mounts. It is important to verify that the receiving chassis accommodates the long format before purchasing.

What does it mean for the can to be "open"?

An open can partially exposes the interior of the motor, facilitating access to the braids and collector for maintenance or replacement. It is common in preparation environments where wear control and easy adjustments are desired.

Is it compatible with chassis from other brands besides Slot.it?

It depends on the chassis design. The Slot.it long can format is a widely used standard, but it is always advisable to confirm the measurements of the receiving chassis mount before installing the motor.

What motor position does this motor support?

The Flat 6 can be mounted in an inline position (motor in line with the rear axle, longitudinal) or sidewinder position (motor parallel to the rear axle, transverse), depending on the chassis and mount used.

What pinion is recommended to use with this motor?

Slot.it does not specify a single pinion for this motor. The choice depends on the mounted crown gear and the desired gear ratio according to the track layout. We recommend consulting Slot.it's gear tables to fine-tune the combination.

The Slot.it Flat 6 open long-can motor (SIMN09ch) delivers 20,500 RPM and 200 g·cm of torque at 12v, with an 8 mm rear axle. Designed for slot car preparation and club racing, this brushed motor suits both inline and sidewinder configurations. Supplied without wires, it is ideal for builders who prefer to solder their own braids. A reliable and well-balanced choice for sport-track racing on Slot.it and Scaleauto compatible chassis.