Guide washer 0.6 x6

Millimetre adjustment for competition guides: the washer that makes the difference

The SRC Guide Washer 0.6 x6 (reference RM1410) is a precision spare part designed for those who prepare their slot cars in detail. With a thickness of 0.6 mm and diameters specifically adapted for competition guides, these washers are aimed at installations in high-demand LMP1 prototypes.

Function and performance

Guide washers serve a discreet but essential function: to regulate the vertical play of the guide within the chassis housing. An incorrect adjustment can result in loss of contact with the rail, variations in braid response, or irregular behaviour in fast corners. With the correct thickness, the guide operates with just the right freedom, without excessive play or unnecessary friction.

• Pack of 6 units
• Thickness: 0.6 mm
• Special measure for COMPETITION guides
• Diameters adapted for LMP1 prototypes

Compatibilities

These washers are specifically designed for SRC competition guides aimed at LMP1 prototypes. If you have doubts about whether they fit your specific setup, we recommend checking the dimensions with the guide installed before making the final adjustment.

Installation and preparation

The installation process is straightforward for any preparer with basic experience. The washer is placed between the guide and the chassis to regulate the working height. It is common to try different thicknesses until finding the optimal operating point: neither too tight to limit pivoting nor too loose to create instability on the rail. Having several units in the pack makes it easy to have spares on hand and conduct comparative tests without running out of material.

Common mistakes

One of the most common mistakes in preparing guides is ignoring the role of washers and leaving the guide with too much play. This causes vibrations, loss of electrical traction, and unexpected track departures. The other extreme—over-tightening—limits the movement of the guide and penalises response in corners. The key is balance, and having the correct thickness available is the first step.

Frequently asked questions

What exactly is a guide washer for?

It regulates the vertical play of the guide in its housing within the chassis. A well-chosen thickness allows the guide to pivot freely without excessive play, improving contact with the rail and the stability of the car.

Why does the pack include 6 units?

Having several units allows for adjustments and tests, provides spares for wear, and covers multiple cars of the same category without the need for frequent orders.

Is it compatible with any SRC competition guide?

It is specifically designed for SRC competition guides with diameters adapted for LMP1 prototypes. For other guides, it is advisable to check the measurements before installation.

Can I combine several washers to achieve a different total thickness?

Yes, it is a common practice in slot preparation. Stacking washers of different thicknesses allows for fine-tuning the adjustment with great precision when the exact thickness is not available in a single piece.

SRC RM1410 guide washer 0.6 mm, pack of 6 units. Special-measure washers designed for competition slot car guides with diameters adapted for LMP1 prototypes. Essential for precise guide setup in high-performance slot racing. Compatible with SRC competition guides for LMP1 scale cars.