Semi-threaded screws

The right screw makes a difference in securing your body shell

When preparing a slot car with the care it deserves, every detail counts, including the screw that keeps the body shell in place. The semi-threaded screws SI-CH120 from Slot.it are the official replacement designed specifically for securing body shells on the models from the Italian brand. No improvisations or generic screws that don't fit well: here you have the exact part.

Function and performance

The semi-threaded design of these screws allows for a firm hold without excessively compressing the body shell, facilitating both assembly and repeated disassembly without damaging the anchoring points. It is the type of screw designed for those who frequently check, adjust, and reassemble, whether at the workbench or between heats at the club.

Compatibility and assembly

This screw set is designed for the chassis and body shells of Slot.it, where the manufacturer specifies this type of fastening in their original assemblies. If you are replacing worn, lost, or damaged screws, the reference SI-CH120 guarantees the correct fit without modifying anything.

• Original Slot.it semi-threaded screws
• For body shell attachment
• Pack of 10 units
• Reference: SI-CH120

Common mistakes

One of the most common problems in the slot workshop is replacing these screws with others of similar size but with a full thread, which can force the plastic of the chassis or body shell and end up damaging the attachment point. Using the original replacement from Slot.it precisely avoids that type of accumulated damage which, over time, forces the replacement of more expensive parts.

Frequently asked questions

Which Slot.it models are these screws suitable for?

They are designed for the body shell fastening systems of Slot.it in general. If you have doubts about compatibility with a specific model, consult your car's manual or contact us.

How many units are included in the pack?

Each pack contains 10 semi-threaded screws, enough to replace those from several cars or to have a good stock of spares in the workshop drawer.

Can I use these screws on body shells from other brands?

They are designed and calibrated for Slot.it systems. Their use on body shells from other brands will depend on whether the attachment point is compatible; we do not guarantee it outside the Slot.it ecosystem.

What tool is used for assembly?

The manufacturer's information does not specify the exact tool. The usual tool for screws of this type is a screwdriver with a tip suitable for the screw head. Consult your model's documentation if you have doubts.

Slot.it SI-CH120 semi-threaded screws for body fixing — pack of 10 units. Original spare part for slot car enthusiasts who demand precise and reliable body attachment on their Slot.it models. Essential workshop stock for club racers and serious hobbyists.