M2x16 nylon flat screw

A small detail that makes a difference in the assembly of your slot car

The Scaleauto SC-5107 M2x16 nylon flat screw is one of those discreet spare parts that every tuner ends up having in their toolbox. Its material, nylon, makes it an ideal option when we seek to reduce weight compared to a metal screw or need to ensure electrical insulation in sensitive areas of the chassis.

Features and function

• Material: nylon, lightweight and non-conductive.
• Metric: M2 — standard thread commonly used in competitive slot car screws.
• Length: 16 mm.
• Flat head: allows for a flush finish with the surface, without interfering with other components of the assembly.

Applications in assembly and tuning

This type of screw is commonly used to secure chassis elements, bodies, or auxiliary parts where a conventional metal screw would add unnecessary mass or could cause an accidental short circuit. In competitive setups, where every tenth of a gram and every milliampere count, having nylon screws is part of the fine tuning of the vehicle.

Its M2 metric is compatible with the standard screws of Scaleauto chassis and other manufacturers that use this common size in the slot car world.

Assembly and recommendations

As it is made of nylon, care should be taken when tightening to avoid stripping the thread or deforming the head. We recommend using a screwdriver suitable for the type of head and not exceeding the torque that this material can withstand. If the screw will be subjected to continuous vibrations, it is advisable to check it periodically to ensure it has not loosened.

Frequently asked questions

Why use a nylon screw instead of a steel one?

Nylon weighs less than steel and does not conduct electricity. This makes it preferable in areas of the chassis where we want to reduce mass or avoid potential accidental short circuits between metal parts.

Is it compatible with chassis from other brands besides Scaleauto?

The M2 metric is a widely used standard in the slot car world. It is always advisable to check that the length of 16 mm fits the thickness of the assembly where it will be installed.

Can I tighten this screw with the same torque as a metal one?

No. Nylon is softer than steel, so it should be tightened moderately to avoid damaging the thread or the head. A careful manual tightening is usually sufficient.

Can it be reused after disassembly?

Generally yes, as long as the thread has not been deformed during the first assembly. If you notice wear or difficulty in screwing it in, it is prudent to replace it with a new one.

The Scaleauto SC-5107 is a M2x16 nylon flat screw designed for slot car assembly and tuning. Its non-conductive, lightweight nylon construction makes it a go-to choice for competitive slot car builders looking to reduce weight and prevent accidental short circuits. Compatible with standard M2 threads used across leading slot car chassis brands.