Universal nylon wheel 15.8x8mm

Precision from the Ground: the SP020902 Nylon Rim from Sloting Plus

In slot car preparation, rims are one of those components that make a real difference, even if it may not seem like it at first glance. The universal nylon rim SP020902 from Sloting Plus comes with measurements of 15.8x8mm and a weight of just 0.37 grams, making it a very interesting piece for those looking to reduce unsprung mass and improve the car's response in corners.

Main Features

• Measurements: 15.8mm diameter × 8mm width
• Material: Nylon
• Weight per unit: 0.37 g
• Contents: Bag with 2 units
• Reference: SP020902
• Manufacturer: Sloting Plus

Function and Performance

Nylon is a material widely used in slot rims due to its balance between structural rigidity and low weight. It does not absorb vibrations like rubber, but offers a firm and concentric base for tyre mounting, facilitating clean and stable running. At 0.37 g per unit, it helps keep rotating mass to a minimum, something that experienced hobbyists particularly value in tuning.

Compatibility

This rim is classified as universal, making it suitable for Scalextric and Ninco track. It is always advisable to check the axle diameter and hub fit on the specific car before mounting, as tolerances can vary between models and brands.

Assembly and Preparation

To get the most out of it, we recommend checking the concentricity of the rim once mounted on the axle, before installing the tyre. If the tyre is to be worked on a lathe or dremel, a balanced rim as a base is the first step to achieving a runout-free rolling. Nylon works well with fine cutting tools and allows for gentle sanding to adjust the diameter if necessary.

Common Mistakes

• Mounting the tyre without first checking that the rim spins without lateral deviation.
• Forcing the fit onto the axle if it does not slide in smoothly: better to check the hub measurement than to damage the rim.
• Assuming universal compatibility without verifying the axle diameter of the receiving car.

Frequently Asked Questions

Does the bag include both rims for a complete axle?

Yes, the bag contains 2 units, which covers a complete axle of the car.

Are these rims compatible with Scalextric and Ninco?

They are classified as universal and are compatible with Scalextric and Ninco track. Always check the axle diameter and hub fit on your specific model.

Can I use them with any slot tyre?

It depends on the width and inner diameter of the tyre. With measurements of 15.8×8mm, they are compatible with tyres designed for that profile. Check the measurements of the tyre you wish to mount before combining them.

Does nylon withstand the heat generated on track well?

Nylon has acceptable thermal resistance for regular use in slot racing. In very long sessions or with high-power motors, it is advisable to periodically check the condition of the rims, as with any component subjected to continuous mechanical stress.

Do I need special tools to mount them?

It is not essential, although having a small mounting tool or fine-nosed pliers makes the process easier and prevents damage to the rim when fitting it onto the axle.

The Sloting Plus SP020902 is a universal nylon rim measuring 15.8×8mm and weighing just 0.37g, sold in a pack of 2. Designed for slot car preparation, it offers a rigid and concentric base for tyre mounting, helping to minimize rotational mass and improve lap consistency. Compatible with Scalextric and Ninco track systems. A go-to choice for hobbyists focused on precise slot car tuning and setup.