Bag - 2 Neum Raid Truck Tyres 27x10mm Needle

PKS Needle Pattern Tyres for Raid Truck: Designed for the Most Demanding Competition Surfaces

When the track is covered in flour or gofio, the choice of tyre changes everything. These PKS needle pattern tyres are specifically designed for those variable grip conditions commonly found in the Raid categories for trucks at scale 1/24 and 1/32. They are not a general-purpose tyre: they are a competition tool intended for a specific scenario.

Technical Features

• Dimensions: 27 x 10 mm
• Cuts: 40 needle-type cuts
• Application: Raid Truck (cars or trucks 1/24 or 1/32)
• Optimal Surface: flour or gofio
• Contents: bag with 2 units

Function and Performance

The needle pattern —with its 40 cuts distributed across the tread— allows the tyre to penetrate and grip powdery surfaces like flour or gofio. On this type of terrain, a slick tyre loses grip critically; the needle profile, on the other hand, actively works to channel the granular material and maintain effective contact with the track. The result is more predictable driving and greater traction during acceleration.

Compatibility and Fitting

These tyres are designed for the Raid truck categories at scale 1/24 and 1/32. Before fitting them, it is advisable to check that the inner diameter fits correctly with the hub of your model and that the width of 10 mm does not interfere with the bodywork or the chassis fenders. A clean fit on the hub —without play or excessive tension— ensures uniform rolling and avoids vibrations that would negatively affect track performance.

Preparation and Usage Recommendations

To get the most out of these tyres on flour or gofio surfaces, consider the following practical points:

• Slightly sand the tread if you detect factory irregularities, to ensure a uniform contact with the track.
• In competition, it is common to fit the tyres well in advance to allow them to settle on the hub before the race.
• Check for wear periodically: the 40 cuts are the active element of the tyre and their condition directly affects grip.
• Store spare units in a cool place away from direct light to preserve the properties of the compound.

Frequently Asked Questions

Are these tyres also suitable for carpet or plastic tracks?

They are optimised for flour or gofio surfaces. They may work on carpet or plastic, but their needle pattern is not the most suitable for those surfaces; specific profiles with different cut geometries exist for those conditions.

Does the bag include 2 units for one axle or for all four tyres of the vehicle?

The bag contains 2 tyres. In most Raid Truck setups, a total of 4 tyres are used, so to equip the complete vehicle you will need two bags.

Are they compatible with both 1/24 and 1/32 scales?

Yes, according to the manufacturer's specifications, they are indicated for both scales in the Raid Truck category. However, always convert the measurements (27 x 10 mm) with the hub and body dimensions of your specific model before fitting.

Do they require any special treatment before their first use?

No specific treatment is indicated. As a general practice in slot and competition modelling, a light sanding of the tread can improve contact uniformity, especially if the tyre has any imperceptible factory ovalisation.

Can they be used on 1/24 cars as well as trucks?

The manufacturer indicates them for "cars or trucks" at scale 1/24 or 1/32 within the Raid category. Always check dimensional compatibility with the hub of your model before confirming the fit.

PKS T27RA needle-pattern raid truck tyres, 27x10mm with 40 cuts, designed for 1/24 and 1/32 scale slot racing on flour or gofio surfaces. A precision competition tyre for raid categories, delivering reliable grip on powder-covered tracks. Pack of 2 units.