Tyre 19.5x10mm F22 dwg 1171 x 4

Slot.it Rear Tyres 19.5x10mm F22 dwg 1171: the trusted replacement for your 1/32

When tyres wear out or lose their original compound, track behaviour changes significantly: the car drifts prematurely, loses traction in corners, and lap times suffer. Replacing them with original parts from the brand is the quickest and most reliable way to restore factory performance.

Function and Performance

These rear tyres with a diameter of 19.5 mm and a width of 10 mm correspond to the F22 profile with reference drawing 1171, the same as fitted as standard on certain Slot.it models in 1/32 scale. As original parts, the fit on the rim is exact, with no need for prior machining to achieve the proper concentricity.

The F22 profile from Slot.it is designed to provide a balanced contact patch on Sport track, enhancing stability under braking and offering progressive response in corners. The compound, characteristic of the Slot.it spare parts range, maintains its properties for a reasonable number of sessions before requiring replacement.

Compatibility

The pack is intended as a direct replacement for Slot.it models that originally come with the tyre featuring drawing 1171 in the rear position. Before purchasing, it is advisable to check in the car's documentation or on the box itself that this is the correct code, as Slot.it uses different profiles and drawings depending on the model and version.

Installation and Preparation

Installation does not require special tools. By simply removing the rear rim, taking off the worn tyre, and fitting the new one while respecting the alignment of the profile, the car is ready to run. If maximum optimisation is desired, it is recommended to perform a light truing of the mounted tyre to eliminate any minimal roundness variation and ensure uniform contact around the circumference.

Common Mistakes

• Fitting tyres of the incorrect profile: a larger diameter than specified may cause rubbing against the body; a smaller one may lead to loss of traction and inadequate ride height.
• Ignoring the condition of the rims before changing: if the rim shows deformations or is dirty from lubricant, the new tyre will not seat properly.
• Not checking concentricity after installation: even if they are original parts, a small truing ensures the best possible results in lap times.

Frequently Asked Questions

How many units are included in this pack?

The pack contains 4 tyres, sufficient to equip the rear axle of two cars or to have spare parts for a season of regular use.

Are they compatible with Scalextric or Ninco track?

Yes, Slot.it cars run smoothly on universal track (Scalextric, Ninco) and on Sport track (Scaleauto, Slot.it). The tyre itself is not conditioned by the type of track, but by the model of car it is intended for.

Do I need to true these tyres before using them?

It is not essential, but it is recommended if you are looking for maximum performance in competition. A light truing after mounting on the rim eliminates minimal irregularities and improves the uniformity of contact with the track.

How do I know if this is the correct tyre for my car?

Check the reference of the original tyre in the car's documentation or on the model's box. The drawing code (dwg 1171) and the profile (F22) must match those specified by Slot.it for that specific vehicle.

How often should I change the tyres in club use?

It depends on the type of compound, the layout, and the intensity of use. As a rough guideline, many club drivers check the condition of the tyres every 4-6 race sessions and replace them when they notice visible loss of profile or drop in grip.

Slot.it SIPT1171F22 rear tyres 19.5x10mm F22 dwg 1171, pack of 4 units for 1/32 scale slot cars. Original replacement tyres for Slot.it models, designed for Sport track systems. Ideal for club racing and home layouts, these tyres deliver consistent grip and precise fitment on compatible Slot.it wheel hubs. A must-have spare part for any Slot.it 1/32 enthusiast looking to maintain factory performance.