High Grip tyres 18.5x10.5mm

Sideways High Grip Low Profile Tyres: Serious Grip for 1/32

When the goal is to maximise the performance of your slot car's rear end, the choice of tyre is as important as any other adjustment. The Sideways High Grip 18.5x10.5mm Low Profile Tyres (ref. SWHG1MLP) are the brand's option for those who want real grip without sacrificing a compact profile that keeps the centre of gravity low.

Function and Performance

The High Grip compound from Sideways is formulated to provide superior adhesion on the rear axles of 1/32 scale slot cars. The low profile reduces the sidewall height, resulting in more stable handling in corners and a more direct power transfer to the track.

• Measurements: 18.5 mm diameter × 10.5 mm width.
• Profile: Low Profile.
• Position: Rear axle.
• Scale: 1/32.
• Brand: Sideways.

Compatibility and Installation

These tyres are designed for the rear axles of Sideways 1/32 scale cars. Always check that the diameter and width of the tyre match the wheels installed on your vehicle before mounting. A correct fit prevents lateral play and ensures that the tyre works uniformly across its contact surface.

If you are preparing the car for competition, it is advisable to sand the tyres with fine-grit sandpaper to equalise the surface and eliminate any mould irregularities before running them.

Installation and Preparation

• Mount the tyres on the wheel and check that they are centred relative to the axle.
• Sand the surface with fine sandpaper if you seek maximum contact uniformity.
• Avoid cleaning the High Grip compound with aggressive products; a slightly damp cloth or a specific cleaning eraser is sufficient.
• Replace the tyres when you observe uneven wear or a noticeable loss of grip.

Common Mistakes

The most common mistake is mounting a tyre that is too wide for the available wheel, causing the sidewall to lack support and the car to drift in corners. Always verify that the tyre width (10.5 mm) corresponds with your rear wheel before installation. Another point to watch: do not force the tyre when hot with solvents, as the compound may lose its grip properties.

Ideal for…

These tyres fit particularly well with enthusiasts preparing their Sideways 1/32 cars for club racing or simply wanting to improve stock grip without major interventions. The low profile makes them especially interesting in configurations where stability is sought without increasing the overall height of the vehicle.

Frequently Asked Questions

What does low profile mean in a slot tyre?

The low profile indicates that the sidewall of the tyre — the distance between the edge of the wheel and the tread — is reduced. This decreases lateral flex in corners, improves stability, and keeps the car's centre of gravity lower.

In which position are these tyres mounted?

They are designed for the rear axle of 1/32 scale slot cars from the Sideways brand.

How do I know if the tyre fits my wheels?

Check that the inner diameter of the tyre matches the outer diameter of your rear wheel and that the width (10.5 mm) corresponds with the width of the wheel. If in doubt, consult the Sideways spare parts catalogue or contact us.

Do I need to glue the tyres to the wheel?

It depends on the fit. If the tyre is well tensioned on the wheel, it is not essential. For competition, it is common to use a small amount of specific contact adhesive to ensure it does not shift under load.

Can I use these tyres on cars from other brands in 1/32 scale?

As long as the wheel dimensions match, it is possible. Verify measurements before installation, as compatibility depends on the specific wheel and not just the scale.

Sideways High Grip Low Profile tyres 18.5x10.5mm (ref. SWHG1MLP) — rear axle slot car tyres for 1/32 scale. Designed for maximum grip and stability, these low-profile tyres are a reliable upgrade for club racing and leisure use. Available at Ministry of Hobby, your specialist slot car and scale modelling store.