100ml Spray Paint. Tamiya TS-12 Orange

The Jagermeister Orange Spray Paint Ready to Apply, by Tamiya

The TS range from Tamiya is one of the benchmarks in global modelling for spray paint. The reference TS-12 corresponds to Jagermeister Orange, an unmistakable shade reminiscent of the racing liveries displayed by some of the most memorable single-seaters and prototypes from the seventies and eighties. In a 100 ml can, this synthetic lacquer aerosol is formulated to provide even coverage, relatively quick drying, and a durable glossy finish.

Product Features

• Reference: Tamiya TS-12 (TA85012)
• Colour: Jagermeister Orange
• Volume: 100 ml
• Type of Paint: Synthetic lacquer aerosol
• Finish: Glossy
• Application: Direct spray, no airbrush needed

Applications

TS-12 is a common choice in static automotive model projects, especially when aiming to reproduce period sports liveries. It is also very practical for painting slot car bodies in plastic or resin, adding colour to figures and diorama elements, or customising any surface compatible with synthetic lacquers.

As it is a ready-to-use spray, it is particularly convenient when needing to cover large areas evenly without resorting to an airbrush.

Compatibility and Surfaces

This paint is formulated to adhere properly to plastic, metal, and previously primed surfaces. To ensure the best results on direct plastic, it is recommended to apply a compatible primer (surfacer or primer) beforehand. For lexan or polycarbonate bodies, always check if the lacquer solvent is compatible with the material before applying.

Application Tips

• Shake the can for at least 2-3 minutes before use, ensuring that the internal ball mixes the contents well.
• Apply in thin, successive layers, keeping the can at a distance of 25-30 cm from the piece.
• Work in an environment with good ventilation and a temperature between 15 °C and 25 °C.
• Allow each layer to dry before applying the next to avoid build-up and runs.
• Once the session is finished, hold the can upside down for a few seconds to clean the nozzle and prevent clogging.
• It can be varnished with compatible varnishes once dry to protect the finish or modify the gloss level.

Finishes

TS-12 dries with a glossy finish characteristic of Tamiya's TS line. If you are looking for a satin or matte finish over this colour, you can apply a final coat of varnish in the desired finish once the paint is fully cured.

Frequently Asked Questions

What materials can I use Tamiya TS-12 on?

It is primarily formulated for plastic and metal. It is recommended to prime the surface beforehand to improve adhesion and achieve a more uniform finish. For materials like polycarbonate, check compatibility before applying.

Can I combine TS-12 with other Tamiya paints?

Within the Tamiya range, TS sprays are compatible with each other. If you want to make touch-ups or add details with a brush, Tamiya's acrylics or enamels can work well once the spray has fully cured. Avoid mixing with products from other bases without testing first on a discreet area.

How long does it take to dry?

The touch dry time is approximately 20-30 minutes under normal temperature and humidity conditions. For complete drying and safe handling of the piece, it is recommended to wait at least several hours. For varnishing or additional work, it is preferable to let cure for 24 hours.

Is the TS-12 colour exactly the original Jagermeister racing orange?

Tamiya has referenced the shade associated with the famous Jagermeister livery for this reference. For high-fidelity reproductions in competition modelling, it may be advisable to compare with photographic references of the original vehicle and conduct tests on scrap material before applying to the final piece.

How much surface does a 100 ml can cover?

The coverage varies depending on the number of layers applied, the spraying distance, and the porosity of the surface. As a general guideline, a 100 ml can is sufficient to comfortably cover a 1:24 scale model or several slot car bodies.

Tamiya TS-12 100ml Orange Jagermeister spray paint — a synthetic lacquer in aerosol format delivering a glossy, even finish. Ideal for static scale model cars, slot car bodies, figures and dioramas. Ready to use straight from the can, no airbrush required. A trusted reference in scale modelling and hobby painting worldwide.