Roller for 3 motors

Prepare your motors before they hit the track with the CC-9002 break-in device from CCSlot3D

The break-in of a slot motor before installing it in the car is one of those steps that the most meticulous preparers never skip. With the CC-9002 from CCSlot3D, this process gains in convenience and efficiency: this break-in device is designed to work with 3 motors simultaneously, allowing for optimised time at the workbench and maintaining an orderly preparation routine.

Function and performance

The pre-installation break-in allows the internal brushes of the motor to seat correctly, ensures that the bearings are lubricated evenly, and enables the mechanical assembly to reach its stable performance before facing the demands of the track. Doing this outside the car prevents unnecessary wear on the chassis and makes it easier to detect any anomalies — noise, vibration, or irregular rotation — before they become a problem during the race.

The CC-9002 allows for the break-in of up to 3 motors at once, which is particularly useful when preparing a set of cars for a championship, adjusting motor variants to compare performance, or simply maintaining a stock of ready-to-use motors.

Compatibility

As a general-purpose preparation accessory, the CC-9002 is compatible with standard format motors commonly found in the slot racing world. To confirm compatibility with specific or less conventional format motors, we recommend consulting the technical information from CCSlot3D or contacting our team.

Assembly and use

The device is designed for direct use on the workbench: motors to be broken in are connected, the appropriate voltage is applied, and the break-in process is allowed to do its work for the time each preparer deems appropriate based on the type of motor and the desired level of performance. Its design for 3 positions allows for multiple motors to be broken in in parallel without the need for constant supervision of each one separately.

Ideal for…

• Preparers who work with several cars at once and need to have motors ready continuously.
• Clubs and enthusiasts who organise their maintenance sessions systematically.
• Competitors who want to arrive at the track with motors already broken in and at their optimal performance level.

Frequently asked questions

Why is it important to break in a motor before installing it?

The pre-break-in allows the internal components of the motor — brushes, bearings, winding — to work together until they reach a stable operating state. This results in greater performance consistency, reduced mechanical noise, and, in general, a longer lifespan for the motor.

How long should each motor be broken in?

The recommended break-in time depends on the type of motor and the preferences of each preparer. There is no universal rule, but it is common in the slot racing field to work with short cycles at reduced voltage before gradually increasing. Consult the manufacturer's guidelines for orientation.

Can I use the CC-9002 with any power supply?

In principle, yes, as long as the appropriate voltage ranges for each type of motor are respected. It is essential not to exceed the maximum recommended voltage for the motor being broken in, especially during the initial phases of the process.

Is it useful for home use or only for professional workshops?

It is perfectly valid for both environments. Any enthusiast with several cars in preparation, or who wants to maintain a stock of broken-in motors, will find it useful at home without the need for a specialised workshop.

The CCSlot3D CC-9002 is a 3-motor break-in device designed for slot car enthusiasts and preparers who want to properly run in their motors before installation. Compatible with standard slot motors, this tool helps achieve stable performance, reduce mechanical noise, and extend motor lifespan — an essential bench tool for club racers and serious hobbyists alike.