Guide Braids Medium x10

Guide Terminals Medium Sideways SWBE17: the small detail that makes a difference on track

In slot racing, the smallest components are often the most critical. The medium guide terminals from Sideways (reference SWBE17) are one of those elements that go unnoticed until they fail — and then everything comes to a halt. With this pack of 10 units, you will always have the necessary spare part on hand for serious preparation without surprises.

Function and Performance

Guide terminals are the connection point between the car's guide and the braids that conduct current from the track to the motor. A damaged, deformed, or poorly connected terminal directly translates to power loss, power cuts, or erratic car behaviour. Replacing them preventively or correctively is one of the most basic yet effective maintenance operations.

Sideways designs these terminals specifically for their medium guides, ensuring a proper fit and optimal conductivity without the need for adaptations.

Compatibility

These terminals are intended for use with Sideways medium guides. If you have doubts about whether they are compatible with your guide model or the chassis you are preparing, consult us before proceeding with the installation.

Installation and Preparation

Changing terminals is a straightforward operation that does not require special tools, although it does require some attention to detail:

• Carefully remove the guide from the car to avoid damaging the braids.
• Check the condition of the braids at the same time: if they are worn, it is the ideal time to replace them as well.
• Ensure that the terminal is properly seated and without play before reassembling the guide.
• Perform an electrical continuity test if you have a multimeter, before putting the car back on track.

With 10 units in the pack, you have enough material for several changes or to equip different cars, making it a very practical option for both the enthusiast working with multiple chassis and the club wanting to maintain a basic stock of spares.

Common Mistakes

• Forcing the terminal during installation can deform it and ruin the connection. Work calmly and without excessive pressure.
• Ignoring the condition of the braids when only changing the terminal can lead to an incomplete diagnosis of the electrical problem.
• Using terminals from other brands or sizes without verifying compatibility can result in poor fitting.

Frequently Asked Questions

What type of guide are these terminals designed for?

They are specifically designed for Sideways medium guides. Check your guide's reference to confirm compatibility before installation.

How many units does the pack include?

The SWBE17 pack includes 10 terminals.

How often should guide terminals be replaced?

It depends on usage and track conditions. It is common to check them each time you work on the guide or when an electrical problem (cuts, power loss) is detected. In intensive use, periodic checks are recommended.

Is it advisable to change the braids when replacing the terminals?

It is not mandatory, but it is highly recommended to perform a joint review. If the braids show wear or dirt, taking advantage of the car's opening to replace them saves time and avoids having to intervene again shortly after.

Are they suitable for universal track and Sport track?

The compatibility of the terminals is linked to the guide, not the type of track. What matters is that the terminal is correct for your Sideways guide. The track (universal or Sport) does not affect the choice of terminal.

Sideways guide terminals SWBE17 — pack of 10 medium guide terminals for slot car maintenance and preparation. Essential spare part for Sideways medium guides, ensuring correct electrical connection between guide and braid. Ideal for club use, home workshop preparation and regular slot car maintenance. Compatible with Sideways medium guides.