BBS 169 wheel covers

BBS 169 Hub Caps from Sloting Plus: Aesthetics and Security Without a Drop of Glue

When you pay attention to every detail of your slot car, the wheels should be no exception. The BBS 169 hub caps from Sloting Plus were created precisely for that: to give your UFO-UNIVERSAL wheels a clean and realistic finish that stays in place during every track session.

Function and Performance

The design of these hub caps addresses six specific objectives that Sloting Plus set during their development:

• That the wheels always look good on track.
• That the hub cap never comes off, with or without glue.
• That the installation requires no adhesive.
• That their weight is less than that of a conventional plastic hub cap: only 0.052 g per unit.
• That there are multiple designs to customise each car.
• That they can be painted freely.

The result is a replacement part that does not compromise either the car's balance or visual aerodynamics, two factors that the most demanding preparers always value.

Compatibility

• Wheel: UFO-UNIVERSAL.
• Diameter: Ø 16.9 mm.
• Thickness: 0.10 mm.

Installation and Preparation

The installation process is straightforward and does not require special tools. Sloting Plus provides detailed installation tips and a support video to ensure a perfect result from the first attempt. If you want to paint them, do so before installing: this achieves a more uniform finish and avoids the risk of staining the wheel.

Each pack includes 2 BBS 169 hub caps and 2 brake discs, allowing you to renew a complete axle in a single purchase.

Common Mistakes

• Applying glue unnecessarily. The anchoring system of these hub caps is designed not to require it; adhesive can complicate future disassembly and add unwanted weight.
• Confusing the diameter. These hub caps are specific to the UFO-UNIVERSAL wheel of Ø16.9 mm. Check the diameter of your wheel before ordering.
• Painting over the installed wheel. If you are going to customise the colour, do it with the hub caps loose for a more polished finish.

Frequently Asked Questions

Do I need glue to secure these hub caps?

No. The anchoring system of the BBS 169 hub caps is specifically designed to hold without any adhesive. In fact, the use of glue is not recommended, as it complicates disassembly without providing any advantage.

Which wheels are they compatible with?

They are exclusively compatible with the UFO-UNIVERSAL wheels of Ø16.9 mm from Sloting Plus. Before purchasing, confirm that your wheel has that exact diameter.

How many units does the pack include?

Each pack contains 2 BBS 169 hub caps and 2 brake discs, enough to equip a complete axle of the car.

Can they be painted?

Yes, they are designed to accept paint. We recommend painting them before installation for a more uniform finish. Brands like Vallejo or Tamiya offer paints perfectly suitable for this type of part.

How much do they weigh? Do they affect the car's balance?

Each hub cap weighs only 0.052 g, less than most plastic hub caps on the market. Their impact on the car's balance and dynamics is practically negligible.

Where can I see the installation video?

Sloting Plus publishes guides and installation videos on their official channel and website. We recommend watching it before the first installation to make the most of the anchoring system.

The Sloting Plus BBS 169 hub caps are precision-made slot car wheel covers designed for UFO-UNIVERSAL rims (Ø16.9 mm). Weighing just 0.052 g each and featuring a no-glue locking system, they are the go-to choice for 1/32 slot car builders who demand both aesthetics and performance. Each pack includes 2 hub caps and 2 brake discs. Paintable and easy to install, these are a must-have detail part for any serious slot car preparation enthusiast.