Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Funda de Silicona con hilo de cobre (OFC)

Cable

Silicone Sleeve with Copper Wire (OFC)

Fabricante: Sloting Plus

Ref: SP107041

€4.00

Oxygen-free copper (OFC) electrical cable with silicone sheath, Ø 1 mm total diameter. More than 70 very fine copper strands inside ensure exceptional flexibility and high break resistance. Bag with 2 metres. Reference SP107041 from Sloting Plus.

Cable

Oxygen-free silicone electrical wire

Fabricante: Sloting Plus

Ref: SP107031

€4.40

Silicone wire with oxygen-free copper (OFC) from Sloting Plus: Ø 1.5 mm, over 70 very fine strands inside and 2 metres per bag. A flexibility and break resistance that make a difference in any slot electrical installation.

Braids

Cut copper braid cb race

Fabricante: Sloting Plus

Ref: SP104136

€2.80

CB Race copper braid in cut format, with a thickness of 0.25 mm and a width of 3.75 mm. A direct and reliable option to ensure a clean current transmission in your slot cars.

Braids

Copper braid cb race 0.35mm - 1m

Fabricante: Sloting Plus

Ref: SP104135

€5.28

CB Race copper braid from Sloting Plus in a 1 metre format: 0.35 mm thickness and 3 mm width for efficient current conduction and stable contact in your slot car's guide.

Braids

Cut copper braid cb race

Fabricante: Sloting Plus

Ref: SP104126

€2.80

CB Race copper braid already cut, with a thickness of 0.25 mm and a width of 3.75 mm. Ready to be mounted in your slot car guide to ensure clean and consistent electrical contact on track.

Braids

Standard 0.25 tinned braid cut

Fabricante: Sloting Plus

Ref: SP103145

€2.48

Sloting Plus tinned copper braid in cut format: 0.25 mm thick and 3.60 mm wide. An essential spare part to maintain a clean and stable current transmission in your slot car.

Braids

Standard 0.35 tinned braid cut

Fabricante: Sloting Plus

Ref: SP103143

€2.48

Sloting Plus tinned copper braid, 0.35 mm thick and 3.60 mm wide, supplied cut and ready to install. A basic spare part that makes a difference in the current transmission of your slot car.

Belts

52mm blue drive belt

Fabricante: Sloting Plus

Ref: SP079952

€4.16

Sloting Plus rubber drive belt in blue to easily identify the size of 52 mm at a glance. Section of 1 mm, outer diameter 52 mm and pack of 4 units to always have a spare on hand.

Belts

50mm yellow drive belt

Fabricante: Sloting Plus

Ref: SP079950

€4.00

Sloting Plus rubber drive belt in yellow, Ø50 mm outer diameter and 1 mm section. The colour code allows you to quickly see which size you have mounted on each axle. Pack of 4 units.

Spacers

0.20mm standard steel spacer

Fabricante: Sloting Plus

Ref: SP062102

€4.80

Standard 0.20 mm stainless steel spacer designed for a 2.38 mm (3/32") axle with an outer diameter of just 4.35 mm. Perfect for assemblies with ball bearings where the external space is critical. Pack of 24 units from Sloting Plus.

Spacers

0.10mm standard steel spacer

Fabricante: Sloting Plus

Ref: SP062101

€4.80

Standard stainless steel spacer with a thickness of 0.10 mm, designed for a shaft of 2.38 mm (3/32'') with an outer diameter of only 4.35 mm. Specifically designed for use in ball bearings or in any point where the minimum possible outer diameter is required. Bag with 24 units.

Spacers

0.20mm mini steel spacer

Fabricante: Sloting Plus

Ref: SP062002

€4.80

Stainless steel spacer only 0.20 mm thick, designed for 3/32" (2.38 mm) axle with a minimum outer diameter of 3 mm. Specifically designed for use in ball bearings where space is critical. Pack of 24 units from Sloting Plus.

Spacers

0.10mm mini steel spacer

Fabricante: Sloting Plus

Ref: SP062001

€4.80

Stainless steel spacer of 0.10 mm specially designed for a 2.38 mm (3/32'') shaft, with the smallest possible outer diameter. Perfect for ball bearings or any point where space is critical. Bag with 24 units.

Centrador extrafino de baja fricción TRIPLEX M2

Stoppers

Ultra-fine low-friction centring TRIPLEX M2

Fabricante: Sloting Plus

Ref: SP061101

€3.84

Extra-fine low-friction centring device made of duralumin by Sloting Plus, designed for 2.38 mm (3/32'') axles. With a fixing system of three M2 allen screws for perfect balancing, it weighs only 0.12 g. The bag includes 2 centrers and 6 screws.

SP051900 - Cojinete universal chasis metal

Bearings

Universal bearing metal chassis

Fabricante: Sloting Plus

Ref: SP051900

€3.68

Universal brass bearing from Sloting Plus, designed for metal, 3D or fibre chassis. Compatible with a shaft of Ø 2.38 mm (3/32'') and standard mounting hole of Ø 4.75 mm. Sold in a pack of 2 units.

SP051101 - Cojinete Universal Reynard 2 KQ

Bearings

Reynard 2 KQ bearing

Fabricante: Sloting Plus

Ref: SP051101

€2.95

Reynard 2 KQ bearing from Sloting Plus in brass, designed for a 2.38 mm (3/32'') axle. Weighing only 0.32 g, it comes in a pack of 2 units. Reference SP051101.

Bearings

Hiper Lub universal bearing

Fabricante: Sloting Plus

Ref: SP051001

€4.10

The first self-lubricating brass bearing specifically designed for slot: it keeps the axle continuously lubricated thanks to its conical reservoir and its 0.20 mm hole. Compatible with anchors of Ø 4.5 to 5 mm. Bag with 2 units.

Titanium

Titanium axle 2.35 x 57mm

Fabricante: Sloting Plus

Ref: SP042257

€6.15

Ground titanium, calibrated and with a titanium coating (≈8 μm), the SP042257 axle from Sloting Plus combines extreme lightness, great toughness, and a wear resistance far superior to that of conventional axles. 57 mm in length, 2.38 mm in diameter, 1.06 g. Bag with 1 unit.

Titanium

Titanium axle 2.35 x 55mm

Fabricante: Sloting Plus

Ref: SP042255

€6.15

Ground and calibrated titanium axle with an 8-micron titanium coating: lightweight, toughness, and a wear resistance far superior to conventional axles. 55 mm in length and 2.38 mm in diameter (3/32"). 1 unit per bag.

Steel

45mm steel axle

Fabricante: Sloting Plus

Ref: SP041045

€3.35

Tempered and calibrated stainless steel axle from Sloting Plus: 45 mm in length and 2.38 mm in diameter (3/32''). Pack of 2 units. A reliable reference for demanding track setups.

Wheel covers

Unpainted complete wheel cover -Le Mans-

Fabricante: Sloting Plus

Ref: SP029902

€1.45

Unpainted complete wheel cover Le Mans from Sloting Plus, ready to receive your own decoration. A detail piece that makes a difference in any custom build.

Aluminium

BBS wheel 16.9x10mm

Fabricante: Sloting Plus

Ref: SP024226

€10.00

BBS wheel made of duraluminium by Sloting Plus in size 16.9x10 mm and weighing only 1.2 g. Pack of 2 units with 2 M2.5x3 mm allen screws included. A solid option for those seeking precision and reduced unsprung mass on track.

Aluminium

America wheel 16.9x10mm

Fabricante: Sloting Plus

Ref: SP024220

€10.00

America wheel 16.9x10mm from Sloting Plus made of lightweight duraluminium (1.2g), with M2.5x3mm allen screw included. Bag with 2 units and 2 screws: everything needed to assemble a perfectly balanced axle ready for the track.

Out-of-Stock

Aluminium

Universal wheel 16.5x8.5mm

Fabricante: Sloting Plus

Ref: SP021136

€8.15

Universal duraluminium wheel from Sloting Plus in size 16.5x8.5 mm, weighing 1.05 g. Compatible with universal track (Scalextric, Ninco). Includes 2 units and 2 M2.5x3 mm allen screws ready for assembly.

View

Showing 265-288 of 656 item(s)