Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

In Stock

Steel

Axle 50mm x2

Fabricante: MITOOS

Ref: CXM054

€3.50

Rear axle of 50 mm made from high-quality steel (diameter 2.38 mm), in a pack of 2 units. A basic and reliable component for the setup and tuning of your slot car.

In Stock

Aluminium

R10 Raid wheels 7 spokes

Fabricante: MITOOS

Ref: CXM079

€8.48

Pack of 2 R10 Raid 7-spoke wheels with a 2.38 mm axle, 19 mm diameter and 10 mm width. A direct and reliable spare part to keep your slot car in optimal running condition.

Aluminium

Double R12 truck wheels

Fabricante: MITOOS

Ref: CXM069

€10.33

Double R12 wheels specific for slot truck (ref. CXM069), supplied in a pack of 2 units. With a shaft of 2.38 mm, a total diameter of 18 mm and a width of 17.75 mm, they offer very specific measurements for a precise setup and uncompromised assembly.

3D chassis, Fibre, Metal..

Complete Raid Panda chassis

Fabricante: MITOOS

Ref: CXM905

€74.66

The Raid Panda CXM905 chassis comes assembled and ready to run with a total width of just 52 mm, 4x4 drive via toothed belts, and M040 wheel set for rally configuration. Everything you need to get out and compete without wasting a minute.

Lubricants

Track cleaner

Fabricante: Sloting Plus

Ref: SP120201

€8.00

Two-in-one product from Sloting Plus that deeply cleans the rails of your slot track and protects them against oxidation. Formulated to remove dust, moisture, oils, tyre residues, and tin deposits from the braids.

Lexan decorado universal velocidad Jerez

Lexan Interior

Universal decorated Lexan speed Jerez

Fabricante: Sloting Plus

Ref: SP395502

€7.20

Decorated lexan cockpit in Jerez version, suitable for universal track. It meets the needs of current models that do not have a specific lexan cockpit. Sold in a bag with 1 unit.

Lexan decorado universal velocidad Alcañiz

Lexan Interior

Universal decorated Lexan speed Alcañiz

Fabricante: Sloting Plus

Ref: SP395501

€7.20

Decorated lexan plastic cockpit, Alcañiz design, intended for speed models that do not have a specific cockpit. Compatible with universal track (Scalextric, Ninco). Bag with 1 unit. Ref. SP395501.

Controllers and power supplies

Open connector for controllers

Fabricante: Sloting Plus

Ref: SP138701

€6.00

Open connector for slot controllers made of fibre and metal. Includes 3 x 4 mm banana plugs with M3×3 allen screw and 2 ties, all in a bag with 1 unit. Designed to keep connections accessible and well organised at all times.

Grasa especial para transmisiones LUBBGREASE

Lubricants

Special grease for transmissions LUBBGREASE

Fabricante: Sloting Plus

Ref: SP120101

€8.35

Lubricating grease based on PTFE (Teflon) specifically formulated for slot car transmissions: protects pinions and crown gears, fills micropores, and ensures long-lasting lubrication in any combination of materials. Format of 4.5 ml, bag with 1 unit.

Braids

Copper braid cb race 1m

Fabricante: Sloting Plus

Ref: SP104125

€5.28

CB Race copper braid in a 1 metre format: 0.25 mm thick and 3.75 mm wide. An essential spare part to maintain a clean electrical contact and ensure the controller's response in every corner.

Belts

56mm green drive belt

Fabricante: Sloting Plus

Ref: SP079956

€4.00

Green rubber transmission belt from Sloting Plus (ref. SP079956): Ø56mm outer diameter and Ø1mm section. The colour code allows you to quickly identify the size installed on each axle, avoiding confusion during assembly or adjustment. Pack of 4 units.

Belts

54mm purple transmission belt

Fabricante: Sloting Plus

Ref: SP079954

€4.16

Purple rubber drive belt from Sloting Plus: 54 mm, 1 mm section and 56 mm outer diameter. The colour coding allows you to instantly identify the size and compare sensations between axles with total precision. Bag with 4 units.

Bearings

RRSS Victor's 2.38mm axle joint

Fabricante: Sloting Plus

Ref: SP053025

€7.20

Victor's RRSS brass joint for 2.38 mm (3/32") axle, with a diameter of 3.80 mm and a thickness of 2 mm. Compatible with all Slot.it and Black Arrow cradles. Sold in a pack of 6 units, ready to install and fine-tune your car's transmission.

Herramientas

T3 TORX tip torque screwdriver

Fabricante: Sloting Plus

Ref: SP141004

€19.20

Precision in every tightening: torque screwdriver with T3 TORX tip designed for M2 studs, with a 1.5 mm Allen key included. The essential ally for the preparer who pays attention to every detail of the assembly.

Herramientas

1.5mm torque screwdriver

Fabricante: Sloting Plus

Ref: SP141003

€19.20

Precision and control in every tightening: torque screwdriver with a 1.5 mm hexagonal tip, ideal for M3 allen screws in slot car preparation. Supplied in a bag with one unit plus a 1.5 mm allen key included.

Herramientas

1.3mm screwdriver torque

Fabricante: Sloting Plus

Ref: SP141002

€19.20

Precision and control in every tightening: torque screwdriver with a 1.3 mm hex tip for M2.5 Allen screws, ideal for fine tuning your slot car. Includes a 1.5 mm Allen key.

Herramientas

Torque screwdriver tip 0.9mm

Fabricante: Sloting Plus

Ref: SP141001

€19.20

Precision and control in every tightening: the 0.9 mm hex tip torque screwdriver from Sloting Plus is designed for M2 Allen screws and comes with a ready-to-use 1.5 mm Allen key.

Eje hueco con tratamiento de titanio 2,38 x 52,5mm

Holes

60mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042160

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approximately 8 microns, 60 mm in length and 2.38 mm in diameter (3/32"). Greater resistance to wear and traction in competition. Bag with 1 unit, weight 1.27 g.

Holes

57.5mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042157

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approx. 8 µm, in a format of 57.5 mm x 2.38 mm (3/32''). Greater resistance to wear and traction for demanding competition. 1.23 g. Bag with 1 unit.

Holes

55mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042155

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approx. 8 µm, measuring 55 mm x 2.38 mm (3/32"). A preparation solution that combines lightness and high resistance to wear and traction for demanding assemblies.

Holes

52.5mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042152

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approximately 8 microns. 52.5 mm in length, 2.38 mm in diameter (3/32''), 1.12 g. One unit per bag.

Titanium

Titanium axle 2.38 x 57.5 mm

Fabricante: Sloting Plus

Ref: SP041157

€5.20

Calibrated titanium axle of 57.5 mm in length and 2.38 mm in diameter (3/32''), weighing only 1.1 g. Its paramagnetic nature and the rough finish on the ends make it unmistakable compared to conventional steel axles. Bag with 1 unit.

Titanium

Titanium axle 2.38 x 55 mm

Fabricante: Sloting Plus

Ref: SP041155

€5.20

Calibrated titanium axle with a diameter of 2.38 mm (3/32") and a length of 55 mm, weighing only 1.05 g. Paramagnetic by nature, extremely lightweight and easy to identify thanks to the rough finish on its ends. Bag containing 1 unit.

Titanium

Titanium axle 2.38 x 52.5 mm

Fabricante: Sloting Plus

Ref: SP041152

€5.20

Titanium axle of 52.5 mm in length and 2.38 mm in diameter (3/32''), weighing only 1 g. Its paramagnetic nature and the rough finish at the ends make it unmistakable on the bench. Bag with 1 unit.

Showing 265-288 of 595 item(s)