Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Llanta universal nylon 15,8x8mm SP020902

Plastic

Universal nylon wheel 15.8x8mm

Fabricante: Sloting Plus

Ref: SP020902

€8.00

Universal nylon wheel from Sloting Plus, measuring 15.8x8mm and weighing just 0.37g per unit. A lightweight and balanced option to prepare your slot car with precision, available in a pack of 2 units.

In Stock

Guide

SC-Universal Guide

Fabricante: Scaleauto

Ref: SC-1604

€4.81

Scaleauto universal guide (SC-1604) with a 7 mm deep blade and a ø3.75 mm stem, ready to mount with a screw. A direct and reliable solution to keep your car on track over Scalextric and Ninco rails.

SC-6663 - Interior Lexan para MB-A GT3 de Scaleauto

Lexan Interior

Lexan Interior Mercedes Benz

Fabricante: Scaleauto

Ref: SC-6663

€3.75

Lexan interior manufactured by Scaleauto for the Mercedes-Benz AMG GT3. Designed to fit precisely into the corresponding body, providing interior detail and the right weight to not compromise track performance.

SC-6664B - Chasis R20 In-Flex para SRT VIper GTS-R 2019 Medium de Scaleauto

Plastic Chassis

R20 In-Flex chassis for SRT Viper GTS-R 2019 Medium

Fabricante: Scaleauto

Ref: SC-6664B

€7.43

The Scaleauto R20 In-Flex Medium chassis (SC-6664B) is specifically designed for the SRT Viper GTS-R 2019, combining the structural rigidity of the R20 system with controlled flex that translates into greater grip and stability during racing.

SC-6662B -Chasis R In-Flex para MB-A GT3 Medium de Scaleauto

Plastic Chassis

R In-Flex chassis for MB-A GT3 Medium

Fabricante: Scaleauto

Ref: SC-6662B

€7.52

The Scaleauto R In-Flex SC-6662B chassis is specifically designed for the MB-A GT3 Medium body, providing the rigidity and controlled flex that the most demanding drivers need to fine-tune track performance.

SC-6650B - Chasis R para A7R GT3 Gris - Medium

Plastic Chassis

Chassis R for A7R GT3 Grey - Medium

Fabricante: Scaleauto

Ref: SC-6650B

€7.43

Original Scaleauto chassis (ref. SC-6650B) specific for the A7R GT3, in grey Medium size. A direct replacement part to restore your slot car to factory optimal conditions without compromises.

SC-6642B - Chasis R para P.208 T16 Gris - Medium de Scaleauto

Plastic Chassis

Chassis R for P.208 T16 Grey - Medium

Fabricante: Scaleauto

Ref: SC-6642B

€7.52

Replacement R chassis in grey and Medium hardness for the Scaleauto Peugeot 208 T16 (ref. SC-6642B). The original part you need to maintain or customise your slot car in perfect racing condition.

SC-6640B - Chasis R para Porsche 991 GT3 Medium de Scaleauto

Out-of-Stock

Plastic Chassis

Chassis R for Porsche 991 GT3 Medium

Fabricante: Scaleauto

Ref: SC-6640B

€6.75

Scaleauto R chassis specific for the Porsche 991 GT3 in Medium size (ref. SC-6640B). An original replacement part that brings your car back to its optimal preparation without compromises.

View

Soporte Motor AW RT3 Offset -0.50mm Extra-Hard (Rojo) de Scaleauto - SC-6536c

Anglewinder

AW RT3 Offset Motor Mount -0.50mm

Fabricante: Scaleauto

Ref: SC-6536C

€9.52

Scaleauto RT3 anglewinder motor mount with -0.50 mm offset in Extra-Hard (red) version. Designed for Scaleauto cars, it provides a firm and precise attachment to fine-tune the geometry of your drivetrain and extract every tenth on track.

Soportes Bancada RT4 para Suspensiones de Scaleauto - SC-6531

Out-of-Stock

Accessories

RT4 Chassis Supports for Suspensions

Fabricante: Scaleauto

Ref: SC-6534

€3.95

RT4 bench supports for Scaleauto suspensions, reference SC-6534. Replacement and tuning parts specifically designed for Scaleauto cars, aimed at ensuring correct assembly and stable performance on track.

View

SC-6531 - Soporte motor AW Rt4 Offset -0.75mm Ajustable

In Stock

Anglewinder

AW Rt4 Adjustable Motor Mount

Fabricante: Scaleauto

Ref: SC-6531

€12.72

Scaleauto Anglewinder RT-4 motor mount (SC-6531) with -0.75 mm offset and adjustable rear support for bearings with spherical bearings. A tuning part designed to get the most out of your Scaleauto GT on track.

SC-6529A - Soporte motor AW Rt4 Offset -0.75mm rodamientos SCALEAUTO

Out-of-Stock

Anglewinder

AW Rt4 Motor Mount Bearings

Fabricante: Scaleauto

Ref: SC-6529A

€12.32

Scaleauto RT-4 Anglewinder motor mount with -0.75 mm offset, specifically designed to accommodate bearings. A preparation component that makes a difference in the geometry of your slot car's rear end.

View

In Line

InLine Slim Rt3 motor mount

Fabricante: Scaleauto

Ref: SC-6527C

€9.22

The Scaleauto InLine Slim RT3 chassis (SC-6527C) offers an offset of -0.5 mm and Extra-Hard construction in red for a rigid, precise inline setup ready for competition in Scaleauto cars.

SC-5310 - Lapiz fibra vidrio 4mm de Scaleauto

Herramientas

4mm fibreglass pencil

Fabricante: Scaleauto

Ref: SC-5310

€4.72

Scaleauto workshop tool designed to clean braids precisely and without damaging them. Its 4 mm fiberglass tip removes dirt and oxidation from copper, restoring electrical contact and improving track performance.

SC-5145I - Tornillería Especial Suspensión de Cabeza Cónica 4,8mm M2x13mm en Aluminio.

Out-of-Stock

of Dampers

Cone Head Screws 4.8mm M2x13mm

Fabricante: Scaleauto

Ref: SC-5145I

€4.16

Special aluminium suspension screws with a conical head of 4.8 mm, metric M2 and a total length of 13 mm. Pack of 6 units designed for precision mounting on slot car chassis.

View

SC-5145G - Tornillería Especial Suspensión de Cabeza Cónica 4,8mm M2x11mm en Aluminio.

In Stock

of Dampers

Cone Head Screws 4.8mm M2x11mm

Fabricante: Scaleauto

Ref: SC-5145G

€4.16

Special conical head suspension screws 4.8mm M2x11mm in aluminium, from Scaleauto (ref. SC-5145G). A pack of 6 units with metric 2, shaft of ø1.70mm and total length of 11mm, designed for suspension assemblies that require precision and lightness.

SC-5145E- Tornillería Cabeza Cónica 4,8mm M2x9mm de Scaleauto

In Stock

of Dampers

Cone Head Screws 4.8mm M2x9mm

Fabricante: Scaleauto

Ref: SC-5145E

€4.16

Six conical head aluminium screws for Scaleauto slot suspensions. Metric 2, total length 9 mm, head diameter 4.8 mm and shaft of ø1.70 mm: the adjustment detail that makes the difference in tuning your chassis.

SC-5145C - Tornillería Cabeza Cónica 4,8mm M2x7mm de Scaleauto

In Stock

bench-mounted

Cone Head Screws 4.8mm M2x7mm

Fabricante: Scaleauto

Ref: SC-5145C

€4.16

4.8mm conical head suspension screws M2x7mm in aluminium, from Scaleauto. Metric 2, shaft diameter ø1.70mm and 3.5mm thread. Pack of 6 units designed for demanding setups.

SC-5145B - Tornillería Cabeza Cónica 4,8mm M2x6mm de Scaleauto

In Stock

bench-mounted

Cone Head Screws 4.8mm M2x6mm

Fabricante: Scaleauto

Ref: SC-5145B

€4.16

Aluminium suspension screws with a 4.8 mm conical head and M2x6 mm metric from Scaleauto. A set of 6 units designed for fine adjustment of suspensions in slot racing competition setups.

SC-5145A - Tornillería Cabeza Cónica 4,8mm M2x5mm

In Stock

bench-mounted

Cone Head Screws 4.8mm M2x5mm

Fabricante: Scaleauto

Ref: SC-5145A

€4.16

Six M2x5mm conical head screws in aluminium from Scaleauto, specifically designed for the suspension of slot cars. With a metric of 2, a shaft diameter of 1.70 mm and a head of 4.8 mm, they provide a precise fit and a professional finish where every tenth of a gram matters.

SC-1607 - GUIA MRRC PARA NSR PRO CON TORNILLO 1/32 de Scaleauto

In Stock

Guide

MRRC PRO guide with NSR screw

Fabricante: Scaleauto

Ref: SC-1607

€4.96

The MRRC PRO SC-1607 guide from Scaleauto combines an 8.3 mm deep blade and a ø3.4 mm stem with an included screw, providing a secure connection and precise guidance in NSR cars. A simple piece to install that makes a difference on track.

SC-1606 - GUIA MRRC PRO CON CLIP Y SUSPENSION 1/32 de Scaleauto

In Stock

Guide

MRRC PRO Guide with Clip

Fabricante: Scaleauto

Ref: SC-1606

€4.81

SC-Universal Home Racing guide with clip for 1/32 slot: 7 mm deep blade and ø3.4 mm stem. Direct replacement from Scaleauto (SC-1606) for those who want precise response and a clean fit on the track.

SC-1603 - GUIA MRRC PRO CON TORNILLO 1/32 de Scaleauto

In Stock

Guide

MRRC PRO Guide with Screw

Fabricante: Scaleauto

Ref: SC-1603

€4.81

The MRRC PRO guide with screw from Scaleauto (SC-1603) combines an 8.3 mm deep blade with a ø3.75 mm stem. A precise and reliable spare part to keep the car well guided on universal track.

SC-1169BR - Corona 29d. M50 AW 25° ø15.8mm. Reverse de Scaleauto

In Stock

Coronas anglewinder

Crown gear 29d. Reverse

Fabricante: Scaleauto

Ref: SC-1169BR

€5.43

Scaleauto SC-1169BR 29-tooth crown gear in Polyamide, designed for Anglewinder configuration with M50 module, 25° angle and 15.8 mm diameter. Compatible with 2.38 mm axle and secured with M2.5 Reverse Insert screw.

Showing 913-936 of 1395 item(s)