Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Muelle UNIVERSAL para suspensión L7/3-S20

For bench

UNIVERSAL spring for suspension L7/3-S20

Fabricante: Sloting Plus

Ref: SP117023

€3.70

Soft suspension spring made of stainless steel for slot cars, with an inner diameter of 3 mm and a length of 7 mm. Universal compatibility and packaged in a bag of 6 units to always have spares on hand.

3 Conectores BANANA macho 4 mm. rojo-negro-blanco

Controllers and power supplies

3 male 4 mm BANANA connectors red-black-white

Fabricante: Sloting Plus

Ref: SP138700

€5.30

Three 4 mm male banana connectors in red, black, and white, branded by Sloting Plus. A practical and safe solution to keep your electrical connections clean and well identified in any slot installation.

Controllers and power supplies

Flexible cable controllers 1.5m + 3 Bananas

Fabricante: Sloting Plus

Ref: SP138001

€10.95

Extra flexible electric cable from Sloting Plus with a silicone sheath of 6 mm diameter, 55 copper strands per sheath and a cross-section of 1.5 mm. Includes 1.5 m of cable and 3 x 4 mm bananas ready to connect to your slot controller.

Enhancing cleaner

Braids and tyres cleaner.

Fabricante: Sloting Plus

Ref: SP120205

€6.40

MIRAKLE CLEANER is the degreasing cleaner from Sloting Plus for braids and rubber, silicone or foam tyres. It removes oils, grease and carbon without leaving oily residues. 60 ml format with a precision dispenser for efficient use.

Lubricants

Special lubricant LUBBOIL No. 5

Fabricante: Sloting Plus

Ref: SP120005

€8.00

Formulated with ceramic nanoparticles and Teflon, Sloting Plus LUBBOIL Nº 5 reduces friction wear by up to 90%, protects gears and mechanisms at extreme temperatures, and extends the lifespan of any moving part in your slot cars.

Kit tornillos bancadas ESPECIAL ALUMINIO

For bench

Special Aluminium Chassis Screw Kit

Fabricante: Sloting Plus

Ref: SP114030

€3.60

M2.1 x 6.5 mm duraluminium screws from Sloting Plus for securing mounts: they weigh only 0.08 g per unit compared to 0.25 g for the equivalent brass. They reduce the suspended weight on the chassis and eliminate play in the housing. Pack of 2 units, compatible with most chassis and mounts on the market.

SP114020 - Kit para suspensión ESPECIAL ALUMINIO

For bench

Special aluminium suspension screws

Fabricante: Sloting Plus

Ref: SP114020

€3.60

Suspension screws made of duralumin M2x13mm, weighing only 0.13 g per unit compared to 0.40 g for an equivalent brass screw. A direct solution to reduce inertia and unsprung weight in the rear area of the chassis. Pack of 2 units.

Tornillos suspensión ESTÁNDAR ALUMINIO -S-

For bench

Standard Suspension Screws ALUMINIUM -S-

Fabricante: Sloting Plus

Ref: SP114011

€4.75

Short suspension screw kit in duraluminium from Sloting Plus: M2 x 11 mm, Phillips head for greater usability, weighing only 0.12 g, and special nut included. Bag with 6+6 units, compatible with the vast majority of chassis and mounts on the market.

Tornillos suspensión ESTÁNDAR ALUMINIO -L-

For bench

STANDARD ALUMINIUM suspension screws -L-

Fabricante: Sloting Plus

Ref: SP114010

€4.75

Short suspension screws in duraluminium from Sloting Plus, featuring a redesigned Phillips head for greater usability. They include a special M2 nut and are presented in a bag with 6+6 units. Compatible with most chassis and mounts on the market.

For bench

Standard Brass Suspension Screws -S-

Fabricante: Sloting Plus

Ref: SP114004

€4.75

Long suspension screw kit in brass and aluminium (M2 x 11 mm, 0.33 gr) with Phillips head and special M2 nut. Bag with 6 + 6 units, compatible with most chassis and mounts on the market.

SP114003 - Tornillos suspensión ESTÁNDAR LATÓN -L-

For bench

STANDARD BRASS suspension screws -L-

Fabricante: Sloting Plus

Ref: SP114003

€4.75

Long suspension screw kit in brass and aluminium (M2 x 13 mm, 0.37 g) with a new Phillips head for a more comfortable and precise fit. Includes 6 screws + 6 special M2 nuts, compatible with most chassis and mounts on the market.

For bench

Complete suspension set

Fabricante: Sloting Plus

Ref: SP110012

€6.95

Complete suspension kit from Sloting Plus (ref. SP110012) with 14 pieces made of brass, aluminium, and stainless steel. Includes semi-threaded M2 screws, special nuts, and three pairs of springs with different hardness (SOFT, MEDIUM, and HARD) to adjust the setup for each track and driving style.

Shock absorbers

Complete suspension set

Fabricante: Sloting Plus

Ref: SP110011

€6.95

Complete suspension kit from Sloting Plus that includes semi-threaded M2 brass screws, special stainless steel nuts, and springs in three hardnesses (Soft, Medium, and Hard). Everything needed to assemble or adjust the suspension on the vast majority of chassis and bases on the market, all in a single bag with 14 pieces.

Funda de Silicona con hilo de cobre (OFC)

Cable

Silicone Sleeve with Copper Wire (OFC)

Fabricante: Sloting Plus

Ref: SP107041

€4.00

Oxygen-free copper (OFC) electrical cable with silicone sheath, Ø 1 mm total diameter. More than 70 very fine copper strands inside ensure exceptional flexibility and high break resistance. Bag with 2 metres. Reference SP107041 from Sloting Plus.

Cable

Oxygen-free silicone electrical wire

Fabricante: Sloting Plus

Ref: SP107031

€4.40

Silicone wire with oxygen-free copper (OFC) from Sloting Plus: Ø 1.5 mm, over 70 very fine strands inside and 2 metres per bag. A flexibility and break resistance that make a difference in any slot electrical installation.

Braids

Cut copper braid cb race

Fabricante: Sloting Plus

Ref: SP104136

€2.80

CB Race copper braid in cut format, with a thickness of 0.25 mm and a width of 3.75 mm. A direct and reliable option to ensure a clean current transmission in your slot cars.

Braids

Copper braid cb race 0.35mm - 1m

Fabricante: Sloting Plus

Ref: SP104135

€5.28

CB Race copper braid from Sloting Plus in a 1 metre format: 0.35 mm thickness and 3 mm width for efficient current conduction and stable contact in your slot car's guide.

Braids

Cut copper braid cb race

Fabricante: Sloting Plus

Ref: SP104126

€2.80

CB Race copper braid already cut, with a thickness of 0.25 mm and a width of 3.75 mm. Ready to be mounted in your slot car guide to ensure clean and consistent electrical contact on track.

Braids

Standard 0.25 tinned braid cut

Fabricante: Sloting Plus

Ref: SP103145

€2.48

Sloting Plus tinned copper braid in cut format: 0.25 mm thick and 3.60 mm wide. An essential spare part to maintain a clean and stable current transmission in your slot car.

Braids

Standard 0.35 tinned braid cut

Fabricante: Sloting Plus

Ref: SP103143

€2.48

Sloting Plus tinned copper braid, 0.35 mm thick and 3.60 mm wide, supplied cut and ready to install. A basic spare part that makes a difference in the current transmission of your slot car.

Belts

52mm blue drive belt

Fabricante: Sloting Plus

Ref: SP079952

€4.16

Sloting Plus rubber drive belt in blue to easily identify the size of 52 mm at a glance. Section of 1 mm, outer diameter 52 mm and pack of 4 units to always have a spare on hand.

Belts

50mm yellow drive belt

Fabricante: Sloting Plus

Ref: SP079950

€4.00

Sloting Plus rubber drive belt in yellow, Ø50 mm outer diameter and 1 mm section. The colour code allows you to quickly see which size you have mounted on each axle. Pack of 4 units.

Spacers

0.20mm standard steel spacer

Fabricante: Sloting Plus

Ref: SP062102

€4.80

Standard 0.20 mm stainless steel spacer designed for a 2.38 mm (3/32") axle with an outer diameter of just 4.35 mm. Perfect for assemblies with ball bearings where the external space is critical. Pack of 24 units from Sloting Plus.

Spacers

0.10mm standard steel spacer

Fabricante: Sloting Plus

Ref: SP062101

€4.80

Standard stainless steel spacer with a thickness of 0.10 mm, designed for a shaft of 2.38 mm (3/32'') with an outer diameter of only 4.35 mm. Specifically designed for use in ball bearings or in any point where the minimum possible outer diameter is required. Bag with 24 units.

Showing 961-984 of 1395 item(s)