Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Trencilla estañada STANDARD 0,25 cortada

Braids

Standard Flat 0.25 Tinned Braid with Dispenser

Fabricante: Sloting Plus

Ref: SP103150

€8.80

Standard Flat tinned copper braid from Sloting Plus: 0.25 mm thick and approx. 3.4 mm wide, in a 2 m bag with an integrated dispenser to keep the material always ready and perfectly organised.

Polea UNIVERSAL Ø6,5 eje 2,38 mm. ORO Slotingplus

Pulleys

UNIVERSAL pulley 6.5mm shaft 2.38mm. GOLD

Fabricante: Sloting Plus

Ref: SP079930

€6.75

Universal pulley made of duraluminium with a conical inner profile that accepts belts of 1 and 1.5 mm, tolerates misalignments between shafts and improves traction. Shaft of 2.38 mm, GOLD finish. Bag with 2 units and includes M2 x 2 mm allen screw.

Rodamiento de bolas eje de 2,38 mm. (3/32'')

Bearings

Ball bearing shaft of 2.38 mm (3/32'') -ABEC

Fabricante: Sloting Plus

Ref: SP055002

€9.28

ABEC 5 steel ball bearing, one lip, for 2.38 mm (3/32'') axle. Anchor hole of 4.75 mm, only 0.2 g per unit. Bag with 2 high-quality units, designed for those who demand more performance and durability in their setups.

Bearings

COMBI PLUS MONOBLOCK 32.5 RT4

Fabricante: Sloting Plus

Ref: SP053105

€6.15

The Sloting Plus Combi Plus Monoblock 32.5 RT4 is a brass component for a 2.38 mm axle, specifically designed for the SC RT4 angular bracket (green). Lightweight, precise, and ready to adjust your traction geometry with complete reliability. Bag with 1 unit.

Bearings

COMBI PLUS MONOBLOCK 30 RT3

Fabricante: Sloting Plus

Ref: SP053104

€6.15

30 mm brass monoblock designed for a 2.38 mm (3/32") axle and compatible with the SC RT3 angular bracket (red). Manufactured by Sloting Plus, it comes in a pack of 1 unit ready to install with the precise fit required for competition.

Bearings

COMBI PLUS MONOBLOCK 29 Slotit

Fabricante: Sloting Plus

Ref: SP053103

€6.15

The Combi Plus Monoblock 29 from Sloting Plus combines crown gear and axle support in a single piece of brass for a 2.38 mm (3/32") axle. Compatible with the Slot.it angular bracket at any offset height. A lightweight, rigid set designed to optimise the transmission to the maximum.

Lexan decorado universal velocidad Alcañiz

Out-of-Stock

Lexan Interior

Subaru DECORATED LEXAN Cockpit -MSC-

Fabricante: Sloting Plus

Ref: SP395521

€7.20

Decorated LEXAN cockpit for Sloting Plus Subaru MSC body. An interior detail that makes a difference in presentation and realism, ready to install directly in your slot car.

View

Muelle universal conico para guia - soft

Springs

UNIVERSAL conical spring for guide (EXTRA SOFT)

Fabricante: Sloting Plus

Ref: SP117092

€3.70

Exclusive conical design from Sloting Plus that, when compressed, reaches only 0.35 mm in thickness. No need for cutting, with perfect parallelism at the ends and impeccable return of the guide. The ultimate solution for those seeking precision in setup.

Bearings

2.38 mm (3/32'') ball bearing axle.

Fabricante: Sloting Plus

Ref: SP055000

€6.72

Steel ball bearing with a lip for a 2.38mm (3/32'') axle, with a standard mounting diameter of 4.75mm. Compatible with metal and fibre chassis. Sold in a pack of 2 units.

Aluminium

Wheel 19.3 x 10 mm. -TOUAREG-

Fabricante: Sloting Plus

Ref: SP027003

€10.95

The Touareg wheel from Sloting Plus is the brand's response for RAID and truck categories: 19.3 x 10 mm, weighing just 2.5 g and designed for the most demanding conditions. Compatible with hub cap for added realism.

1/32 spare parts

5mm nipple protector, 5.5mm external

Fabricante: Sloting Plus

Ref: SP399904

€3.36

A simple and effective solution to preserve the mounting pins of your slot car bodies. Made of stainless steel, with an inner diameter of 5 mm and an outer diameter of 5.5 mm, it comes in a bag with 2 + 2 units. Suitable for installation from day one as well as for restoring already damaged pins.

Herramientas

Set of gauges for axles 1/32 and 1/24

Fabricante: Sloting Plus

Ref: SP143260

€4.40

Three stainless steel gauges (0.10 / 0.15 / 0.20 mm) for precisely adjusting lateral tolerance on 2.38 mm and 3 mm axles, suitable for preparations in 1/32 and 1/24 scale. Includes a protective tube to keep them in perfect condition.

Out-of-Stock

Controllers and power supplies

Electric cable protector

Fabricante: Sloting Plus

Ref: SP138907

€1.95

Rubber protector for electric cable with a diameter of between 5.5 and 6 mm, designed to fit into holes of 8.5 to 9.5 mm. Supplied in an individual bag with a tie included to ensure a clean and professional installation.

View

Controllers and power supplies

Control spring

Fabricante: Sloting Plus

Ref: SP138905

€2.00

3 cm long steel spring for slot controllers, manufactured by Sloting Plus. Sold in a pack of 2 units, ready to replace when wear or a knock leaves the trigger without the response you need.

Bearings

Evo Lub universal bearing

Fabricante: Sloting Plus

Ref: SP051002

€3.35

The Evo Lub universal bearing from Sloting Plus combines an internal lubricant reserve groove with a minimised friction surface. It definitively replaces the previous UNIVERSAL model and is compatible with traditional or 3D plastic mounts with a diameter of between 4.6 and 5 mm.

Carbon

Carbon axle 2.38 x 54 mm

Fabricante: Sloting Plus

Ref: SP041254

€4.56

Rectified and calibrated carbon fibre measuring 54 mm in length and 2.38 mm in diameter (3/32''). Weighing only 0.34 g per unit, this axle from Sloting Plus is the usual choice for the front axle when lightness makes a difference. Pack of 2 units.

Arandela especial REDONDA para chasis y bancadas

Nuts and washers

Special ROUND washer for chassis and mounts

Fabricante: Sloting Plus

Ref: SP150042

€5.20

Small but key in the setup: the round washer SP150042 from Sloting Plus allows for precise adjustment of the pivot screw, regulation of the motor mount, and prevents screws from falling onto the track. Stainless steel, 0.15 mm thick, suitable for M2 and M2.1 mm screws. Pack of 40 units.

For axle

-U- FORK suspension kit

Fabricante: Sloting Plus

Ref: SP110031

€6.95

Two units of -U- FORK suspension made of stainless steel by Sloting Plus. A precision spare part designed for the preparation and technical setup of your slot car.

For axle

Suspension kit - FRONT SUSPENSION

Fabricante: Sloting Plus

Ref: SP110030

€8.80

Stainless steel front suspension system from Sloting Plus, designed exclusively to work with the independent wheel axle SP046001. Each pack includes 2 units, 4 springs, and 4 M2 Nylon nuts, opening a new dimension of preparation and tuning in slot racing.

Polea UNIVERSAL Ø10 eje 2,38 mm. ROJO Slotingplus

Out-of-Stock

Pulleys

UNIVERSAL pulley Ø10 shaft 2.38 mm. RED

Fabricante: Sloting Plus

Ref: SP079932

€6.05

Universal pulley made of duraluminium with a conical interior design for belts with a diameter of 1 and 1.5 mm. Improves traction, tolerates misalignments, and reduces the risk of belt disengagement. Includes M2 x 3 mm allen screw. Bag with 2 units.

View

Polea UNIVERSAL Ø8 eje 2,38 mm. AZUL Slotingplus

Pulleys

UNIVERSAL pulley Ø8 shaft 2.38 mm. BLUE

Fabricante: Sloting Plus

Ref: SP079931

€6.75

Cone-shaped internal design duraluminium pulley for 1 and 1.5 mm belts, with a 2.38 mm shaft and finished in blue. Improves traction and tolerates misalignment between axles. Pack of 2 units and includes M2 x 2.5 mm allen screw.

Separador MAXI 0,20 mm. para guia 1/32 UNIVERSAL

Spacers

MAXI 0.20 mm spacer for 1/32 UNIVERSAL guide

Fabricante: Sloting Plus

Ref: SP069004

€3.54

MAXI spacer of 0.20 mm designed for the 1/32 Universal guide from Sloting Plus: it fits almost all guides on the market, minimises lateral oscillation and ensures a clean fit between the screw shaft and the braid support.

SP069003 Separador MAXI 0,10 mm. para guia 1/32 UNIVERSAL SLOTINGPLUS

Spacers

MAXI spacer 0.10 mm for 1/32 UNIVERSAL guide

Fabricante: Sloting Plus

Ref: SP069003

€3.54

MAXI spacer of 0.10 mm from Sloting Plus for 1/32 Universal guide: fits between the screw shaft and the braid support to minimise lateral oscillation. Direct, uncomplicated solution, compatible with the vast majority of guides on the market.

Kit de semiejes UNIVERSAL y MULTIFUNCIONAL

Specials

UNIVERSAL and MULTIFUNCTIONAL axle kit

Fabricante: Sloting Plus

Ref: SP046001

€9.75

One single reference, infinite possibilities: the SP046001 semi-axle kit from Sloting Plus is suitable for any 1/32 model and allows for multiple setups, including axle for independent wheels, custom-fitted without the need for cuts or special tools.

Showing 121-144 of 653 item(s)