Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

All products in Home

Bronze spacer 2mm axle 2.38mm x20 | SP062205
  • New
Spacers

Bronze spacer 3 mm for 2.38 mm axle

Brand: Sloting Plus
Ref: SP062209
€4.40
Brass spacers 2 mm thick for a 2.38 mm (3/32'') axle with a 3.2 mm outer diameter. Pack of 20 units, ideal for precisely adjusting the lateral position of crown gears, pinions, and wheels in the preparation of your slot car.
3D Chassis ERS Hard Offset 1.0 for Porsche 992 GT3 CDC-76610H
  • New
Last items in stock
3D chassis, Fibre, Metal..

3D Chassis ERS Hard Offset 1.0 for Porsche 992 GT3 Scaleauto

Brand: CDC Slot
Ref: CDC-76610H
€14.00
Maximise the structural rigidity and driving precision of your Scaleauto Porsche 992 GT3 with this 3D ERS chassis in Hard composite. Designed to provide direct power transfer and superior stability through corners, this component with an offset of 1.0 allows for millimetric control and optimised tilting. The ultimate technical solution for club...
3D Chassis ERS Hard Offset 1.0 for Cadillac LMH CDC-81510H
  • New
Last items in stock
3D chassis, Fibre, Metal..

3D ERS Hard chassis with 1.0 offset for Scaleauto Cadillac LMH

Brand: CDC Slot
Ref: CDC-81510H
€14.00
Maximise the structural rigidity and dynamic response of your Scaleauto Cadillac LMH with this 3D ERS chassis in Hard composite. Specifically designed to provide direct power transmission and superior stability through corners, this component with a 1.0 offset allows for more precise control and optimised roll. The ideal technical choice for club drivers...
3D Chassis ERS Hard Offset 1.0 for Corvette C8R GT3 CDC-81810H
  • New
Last items in stock
3D chassis, Fibre, Metal..

ERS Hard 3D chassis with 1.0 offset for NSR Corvette C8R GT3

Brand: CDC Slot
Ref: CDC-81810H
€14.00
Maximise the structural rigidity and track precision of your Corvette C8R GT3 with this 3D ERS chassis in Hard composite. Designed for drivers seeking direct power transmission without parasitic twists, this 1.0 offset chassis optimises the centre of gravity for ultra-stable cornering. Its technical architecture allows for advanced competition setup,...
3D monoblock chassis CDC-79510H for Porsche 963 LMH Scaleauto
  • New
Last items in stock
3D chassis, Fibre, Metal..

3D SRS monoblock anglewinder chassis with suspension for Scaleauto Porsche 963 LMH

Brand: CDC Slot
Ref: CDC-79510H
€14.00
Optimise the dynamic behaviour of your Scaleauto Porsche 963 LMH with this high-competition 3D monoblock chassis. Designed with a 2º anglewinder configuration and an innovative bridge system for suspension adjustment without removing the body, this component ensures superior stability on track. Its lightweight architecture, compatible with ball bearings...
3D Skeleton chassis CDC-240H for Lola Aston Martin DBR1-2
  • New
Last items in stock
3D chassis, Fibre, Metal..

3D Skeleton chassis for Slot.It Lola Aston Martin DBR1-2

Brand: CDC Slot
Ref: CDC-240H
€11.00
Optimise the weight and dynamic response of your Lola Aston Martin DBR1-2 with the 3D Skeleton chassis. Its lightweight design enhances agility through corners without sacrificing the necessary durability for demanding competition. Thanks to its mechanical versatility, allowing both angled and inline configurations, and the precise adjustment of the...
Modular 3D chassis CDC-197H for Slot.It and Policar Ferrari F40
  • New
Last items in stock
3D chassis, Fibre, Metal..

3D chassis for Slot.It/Policar Ferrari F40 for independent bench in anglewinder

Brand: CDC Slot
Ref: CDC-197H
€11.00
Optimise the dynamic behaviour of your Ferrari F40 with this modular 3D chassis designed for competition. Its torsion regulation system using four mounting points allows for the adaptation of the assembly's stiffness to the specific conditions of each track, ensuring precise and stable cornering. An essential component for club racers looking to maximise...
3D chassis SLRT3 for Lamborghini GT2 Supertrofeo CDC-636M
  • New
Last items in stock
3D chassis, Fibre, Metal..

3D chassis SLRT3 for Scaleauto Lamborghini GT3 Supertrofeo.

Brand: CDC Slot
Ref: CDC-636M
€14.00
Optimise the centre of gravity of your Lamborghini GT2 Supertrofeo with this 3D SLRT3 chassis. Designed for a precise internal fit that reduces the height from the track by 1 mm, this component drastically improves stability and cornering performance. Its compatibility with multiple mounts and the millimetric adjustment of the front axle allow for an...
3D chassis LT2 for NSR Hypercar CDC-805H
  • New
Last items in stock
3D chassis, Fibre, Metal..

NSR LT2 3D chassis for Hypercar

Brand: CDC Slot
Ref: CDC-805H
€11.00
Enhance the dynamic behaviour of your NSR Hypercar with this LRT3 3D chassis, designed to provide superior technical versatility on track. Thanks to its compatibility with the most commonly used club mounts and the ability to adjust the front axle using M2 allen screws, this component allows for a precise setup that optimises traction and cornering...
3D chassis LRT3 for NSR Hypercar CDC-804H
  • New
Last items in stock
3D chassis, Fibre, Metal..

3D chassis LRT3 for NSR Hypercar

Brand: CDC Slot
Ref: CDC-804H
€11.00
Enhance the dynamic behaviour of your NSR Hypercar with this LRT3 3D chassis, designed to provide superior technical versatility on track. Thanks to its compatibility with the most commonly used mounting systems in clubs and the ability to adjust the front axle using M2 allen screws, this component allows for a precise setup that optimises traction and...
3D chassis LRT4 for NSR Hypercar CDC-803H
  • New
Last items in stock
3D chassis, Fibre, Metal..

3D chassis LRT4 for NSR Hypercar

Brand: CDC Slot
Ref: CDC-803H
€11.00
Optimise the dynamic behaviour of your NSR Hypercar with this 3D LRT4 chassis, designed to integrate the renowned RT4 base from Scaleauto. This technical piece allows for precise adjustment of the front end using M2 allen screws and ensures optimal wiring management, guaranteeing consistent performance on track. An essential component for club racers...
3D Chassis ERS Offset 1.0 for NSR Hypercar CDC-80610H
  • New
Last items in stock
3D chassis, Fibre, Metal..

3D chassis ERS. NSR Hypercar Offset 1.0

Brand: CDC Slot
Ref: CDC-80610H
€14.00
Enhance the performance of your NSR Hypercar with this 3D monoblock chassis designed for demanding competition. Thanks to its 11º anglewinder configuration and its innovative suspension adjustment system without removing the body, this component ensures superior stability and precise cornering. Its lightweight and technical architecture allows for a...
NSR 3D Hypercar chassis for Slot.it cradle and RT3 ACS015Pro
  • New
3D chassis, Fibre, Metal..

3D Hypercar chassis for Slot.it cradle and RT3 v2.0 Master 26 Edition

Brand: ACSlot
Ref: ACS015PRO
€15.00
Elevate the performance of your NSR Hypercar to a higher level with this high-precision 3D chassis. Specifically designed to provide a perfect integration with Slot.it type motor cradles and RT3 v2.0 mounts, this Master26 Edition version stands out for its ultra-light structure and a guide blade made from a single piece. This improvement not only...
3D chassis ACS016PRO Porsche 963 Scaleauto | ACSlot
  • New
Out-of-Stock
3D chassis, Fibre, Metal..

3D chassis Porsche 963 Scaleauto for Slotit cradle and RT3 v3.0 Master26 Edition

Brand: ACSlot
Ref: ACS016PRO
€15.00
3D chassis ACSlot ACS016PRO Master26 Edition for the Scaleauto Porsche 963: guide manufactured in a single piece with the chassis to eliminate play and gain direct response to the controller. Compatible with Slot.it type motor mounts and RT3 v3.0 brackets. Real weight reduction that translates into better acceleration and stability in corners.
SLOT.IT TOYOTA GR010. 3D CHASSIS SKRT3 MEDIUM
  • New
Last items in stock
3D chassis, Fibre, Metal..

SLOT.IT TOYOTA GR010. 3D CHASSIS SKRT3 MEDIUM

Brand: CDC Slot
Ref: CDC-619M
€14.00
High competition 3D chassis for the Fly Buggyra MKR08. Anglewinder configuration compatible with Scaleauto RT4 and CDC Slot AW12. Includes adjustable front axle and integrated cable guide.
Magnesium

URANO EVO II wheel 15.9 x 10 (2pcs)

Brand: Sloting Plus
Ref: SP022512
€12.75
Direct technical evolution of the legendary MERKURO: the Urano EVO II wheel from Sloting Plus combines ultra-light magnesium (0.95 gr/unit), interior flank perforation, and M2.5 Allen fixation for almost perfect balance in slot racing competition. Sold in a pack of 2 units.
Aplicación de aceite de ultra baja densidad en rodamientos de precisión.
Last items in stock
Lubricants

Ultra Low Density High Competition Slot Oil

Brand: Tectime
Ref: TT0342
€5.25
Specifically formulated for high competition in slot racing, this ultra-low density oil from Tectime penetrates into the tightest spaces of bearings and bushings without play, eliminating drag effect and allowing the axle to rotate freely to extract maximum performance from the motor.
3D chassis, Fibre, Metal..

3D chassis ACS Hypercar NSR cradle Slot.it and RT3

Brand: ACSlot
Ref: ACS014PRO
€15.00
3D chassis from ACSlot designed for NSR Hypercars, compatible with Slot.it and Scaleauto RT3 motor mounts. A precision base for those preparing their car with a competitive mindset, without sacrificing configuration flexibility.
Magnesium

Wheel 16.7 x 10 mm Urano Evo II Magnesium

Brand: Sloting Plus
Ref: SP022522
€12.72
Direct evolution of the Urano wheels, the Evo II in magnesium features the sidewall lightening inherited from the Merkuro line in a more refined design. Weighing just 1.07 grams and equipped with an M2.5 x 2.5 mm Allen screw for nearly ideal balance, they are a reference for drivers who push every hundredth on track.
Lexan Interior

Generic rally Lexan interior 1/32

Brand: Tectime
Ref: TT3094
€2.91
Generic Lexan interior from Tectime for rally bodies in 1/32 scale. Reduces weight in the upper part of the model, improves the centre of gravity, and meets the most demanding technical checks. Includes driver and co-driver busts, with an adaptability that makes it suitable for a wide variety of bodies.
Bearings

COMBI PLUS EVO bearing 29.5 mm.

Brand: Sloting Plus
Ref: SP053106
€8.00
The evolution of the reference bearing from Sloting Plus: the COMBI PLUS EVO 29.5 mm. combines high-quality duraluminium and brass to minimise friction, gain traction on the rear axle, and shave tenths off each lap. Suitable for 3D chassis and NSR or compatible triangular mounts.
Belts

MXL belt z57-2mm - 1 pc.

Brand: MITOOS
Ref: CXM457
€3.49
Mitoos MXL pitch timing belt, 57 teeth and 2 mm wide. Perfect fit with the entire range of Mitoos toothed pulleys —both plastic and aluminium— to transmit high revolutions without losing traction.
Showing 1-24 of 991 item(s)

Welcome to Ministry of Hobby, your go-to store for everything related to the world of scale hobbies. Whether you have been in this for years or have just discovered the joy of collecting, preparing, or racing with miniatures, here you will find more than just products: you will find expertise, specialisation, and a selection curated by and for true enthusiasts.

Our catalogue covers very different disciplines, but they all share something: attention to detail, a passion for the small, and the satisfaction of holding — or racing on the track — something well made. From slot cars ready to race to collectible diecast miniatures, along with paints, airbrushes, workshop tools, technical spare parts, and everything needed for static modelling, figures, and dioramas. A vast universe with a common philosophy.

This is the starting point of your visit. From here, you can explore by categories, by brand, or by the discipline that excites you the most. If you have questions, our team knows the products firsthand and can guide you directly. Because there is nothing worse than buying something that does not fit your needs.

What you will find at Ministry of Hobby

The catalogue is organised into major areas that respond to the real needs of each type of enthusiast. We do not mix everything in one drawer: each section has real depth, with selected and updated references.

Slot

The world of slot is much broader than it appears from the outside. Here we work with racing cars in scales 1/32 and 1/24, technical spare parts for preparation and tuning, tracks and electronics, and all the equipment necessary to race at home or in a club. Brands like NSR, Slot.it, Avant Slot, Scaleauto, Scalextric, or Ninco are well represented with curated catalogues. If you are looking for a ready-to-race car or a specific motor to enhance your racing setup, this is your section.

Diecast and Collecting

Diecast miniatures are another way to experience the hobby: without tracks, without preparations, focusing on detail, scale, and collector value. We work with different scales — from 1/18 to 1/64 — and with criteria to select models that truly deserve a place in your display case. Historic racing cars, classic road models, limited editions... there is much to choose from.

Modelling, Kits, and Figures

Static modelling, figures, and dioramas have their own well-stocked space. Acrylic paints from brands like Vallejo, Tamiya, Kaleido, or Ammo; airbrushes for all levels; precision tools; decals; putties; bases and materials for dioramas. A section designed for both beginners and those who already have developed techniques and are looking for specific materials.

Workshop and Maintenance

A good enthusiast takes care of their equipment. In this area, you will find lubricants, cleaners, workshop tools, finishing products, and everything necessary to keep your cars, kits, and miniatures in perfect condition. Small details that make the difference between a piece that lasts for years and one that deteriorates due to lack of care.

How the catalogue is organised

We have structured the store to make it easy to find what you are looking for, whether you know exactly what you want or are exploring. You can navigate by discipline, by product type, or directly by brand. Product sheets include real technical information: compatibilities, features, usage guidance. We do not fill descriptions with empty words.

If at any point you cannot find something or have questions about which product best suits your case, you can contact us directly. We prefer to guide you well before you buy something that may not fit.

Why buy here and not anywhere else

This is a legitimate question. The honest answer is that Ministry of Hobby is not a generalist store that sells everything. It is a specialised store, with a team that knows the catalogue because they practice the hobby. This has concrete consequences:

  • Curated selection: we do not list everything that exists, but rather what we consider makes sense to recommend.
  • Reliable technical information: the descriptions, compatibilities, and advice you read are reviewed by people who understand the product.
  • Real advice: if you have a technical question, you will not receive a catalogue response. We will tell you what we know frankly.
  • Community and context: we understand the hobby ecosystem — clubs, competitions, trends, news — and that is reflected in how we work.

Who is Ministry of Hobby for

For the slot enthusiast who has been preparing cars for years and wants quality spare parts and good technical information. For those who have just discovered the world of diecast and do not know where to start. For the modeller looking for specific paints or a new airbrush. For the collector who wants to expand their display case with purpose. And also for those who are gifting: here you will find well-explained options that make choosing easy without fear of making a mistake.

It does not matter what stage of the hobby you are at. What matters is that you find what you need here — or that we help you find it.

Frequently Asked Questions

What disciplines does Ministry of Hobby cover?

We cover slot (cars, spare parts, tracks, and electronics), diecast and scale collecting, static modelling, figures, and dioramas, as well as all the workshop and painting materials associated with these disciplines.

Can I find products for both beginners and advanced users?

Yes. The catalogue has products for all levels. In the product sheets and our descriptions, we usually indicate which profile each product is more oriented towards, so you can choose with purpose.

Do you work with the most important brands in the slot sector?

We work with NSR, Slot.it, Avant Slot, Scaleauto, Scalextric, Ninco, and other leading brands, both in cars and in spare parts and electronics.

What slot track systems do you have available?

We have tracks and accessories for the main systems on the market. It is important to know that the universal track is compatible with brands like Scalextric and Ninco, while the sport track is used by Scaleauto and Slot.it, among others. If you have questions about compatibilities, consult us before buying.

Are the paints and modelling materials only for slot?

No. The section for paints, airbrushes, and finishing materials is designed for all modelling: slot cars, static kits, figures, and dioramas. Brands like Vallejo, Tamiya, Kaleido, or Ammo are suitable for any of these disciplines.

Can I ask for advice before buying?

Of course. You can contact us through the available channels in the store. Our team knows the catalogue firsthand and can guide you without obligation.

Do you have frequent new arrivals in the catalogue?

Yes. We regularly update the catalogue based on new releases from brands and the demand from enthusiasts. If there is something you are looking for and cannot find, consult us.

What is the difference between a slot car and a diecast miniature?

A slot car is designed to run on a track with a rail, has a motor, guide, and braids. A diecast miniature is a static collectible model, generally made of die-cast metal, intended for display. They are distinct worlds, although they share a passion for scale miniatures.

Do you work with resins in slot cars?

Yes. Brands like Avant Slot produce resin bodies at an industrial level for the slot world, with a level of detail and finish superior to standard plastic. We have them available in our catalogue.

What scale is most common in slot?

Scale 1/32 is the most widespread in the world of slot, both for home use and in competition. Scale 1/24 is larger and more common in advanced competition or in cars with greater detail. In diecast, the most common scales range from 1/18 to 1/64, each with its own particularities.

Product added to wishlist

Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Para dar su consentimiento sobre su uso pulse el botón Acepto.