Anglewinder

We select brackets and supports for anglewinder setups with a focus on what truly matters on the track: alignment precision, proven materials, and compatibility with the most commonly used transmission groups in competition. Here you will find the specific component you are looking for, not just generic options.

Todos los productos Anglewinder

Anglewinder

SICH60B1 - Motor mount anglewinder 0.5mm offset (EVO 6) Hard bearings

Fabricante: SLOT.IT

Ref: SICH60b2

€7.16

Slot.it EVO 6 anglewinder chassis with 0.5 mm offset and Hard version bearings. Designed for those seeking a solid and geometrically precise base on which to build or fine-tune their drivetrain on Sport track.

In Stock

Anglewinder

Motor mount offset angle 0.75mm

Fabricante: Avant Slot

Ref: AV20575c

€6.94

Avant Slot anglewinder chassis with an offset angle of 0.75 mm for 1/32 scale. A precision piece that allows for the adjustment of the motor position and optimises power transmission in competition setups.

In Stock

Anglewinder

Rally angle motor mount

Fabricante: Avant Slot

Ref: AV20575a

€6.94

Avant Slot anglewinder bracket with 0.00 mm offset for rally cars in 1/32 scale. Replacement part designed to maintain the exact geometry of the motor and ensure a clean and precise fit in your chassis.

In Stock

Anglewinder

Motor mount offset angle 1.25mm

Fabricante: Avant Slot

Ref: av20575e

€6.94

Anglewinder motor mount with a 1.25 mm offset from Avant Slot, designed to precisely adjust the motor position in 1/32 setups. A key spare part for those looking to fine-tune the transmission geometry and squeeze every tenth on track.

In Stock

Anglewinder

Offset angle motor mount 1.00mm

Fabricante: Avant Slot

Ref: av20575d

€6.94

Anglewinder motor mount with an offset angle of 1.00 mm from Avant Slot, designed for 1/32 scale. It allows for precise adjustment of the motor position and optimises the transmission in anglewinder configurations.

Anglewinder

Motor mount offset angle 0.50mm

Fabricante: Avant Slot

Ref: av20575b

€6.94

Motor support anglewinder with an offset angle of 0.50 mm from Avant Slot, designed for 1/32 scale. It allows for precise adjustment of the motor position and optimises the power transmission to the rear axle in anglewinder setups.

3D chassis, Fibre, Metal..

Ferrari F40 GTR chassis SLOT.IT- POLICAR

Fabricante: 3DSRP

Ref: SRP-001069

€13.60

Anglewinder chassis manufactured by 3DSRP in ASA plastic using FDM 3D printing, specifically designed for the Ferrari F40 GTR body in 1/32 scale, compatible with Slot.it and Policar mounts. A precise technical solution for those looking to prepare or customise their slot car with expertise.

Anglewinder

Motor Mount Anglewinder Offset -0.70mm Sideways

Fabricante: Sideways

Ref: SWMAWGT3

€8.19

The anglewinder motor mount from Sideways with an offset of -0.70mm (ref. SWMAWGT3) allows for precise adjustment of the motor position in anglewinder configuration, fine-tuning the transmission geometry to maximise track performance.

Anglewinder

Angewinder Motor Mount Offset 0.0mm EVO6

Fabricante: SLOT.IT

Ref: SICH61C

€9.25

Slot.it Anglewinder EVO6 motor mount in carbon fibre, with an offset of 0.0mm. Designed for standard and Flat motors, it offers an angled motor position for optimal weight distribution in competition.

Soporte de motor Angewinder Offset 1,25mm HARD

In Stock

Anglewinder

Angewinder Offset Motor Mount 1.25mm HARD

Fabricante: SLOT.IT

Ref: SICH130

€7.18

Anglewinder motor mount with a 1.25 mm offset in HARD version, designed by Slot.it for standard and flat motors. A key component for adjusting the motor position and fine-tuning your car's performance on track.

Soporte Motor Tipo RT4 (Carbono). Mecánica SLOT.IT offset 1.25mm.

1/32 spare parts

RT4 Type Motor Support (Carbon). SLOT.IT mechanics offset 1.25mm.

Fabricante: 3DSRP

Ref: SRP00789

€8.00

RT4 type chassis printed in 3D with carbon filament (FDM) and an offset of 1.25 mm, specifically designed to mount Slot.it mechanics —both pinion and crown gear—. A technical and lightweight piece for those who fine-tune every detail of their slot car.

Puente estabilizador suspensión Bancada RT4 Sca

3D chassis, Fibre, Metal..

RT4 Sca Suspension Stabiliser Bridge

Fabricante: 3DSRP

Ref: SRP018109

€2.56

3D printed part in ASA filament with carbon fibre, specifically designed as a stabiliser bridge for RT4 SCA chassis with SCA springs. Precision FDM manufacturing for direct integration into your setup.

Soporte Motor Line (Específico para NSR F1-22

3D chassis, Fibre, Metal..

Motor Support Line (Specific for NSR F1-22)

Fabricante: 3DSRP

Ref: SRP00786

€6.40

3D-printed chassis using FDM by 3dsrp, specifically designed for the NSR F1-22. With height adjustment, it allows precise positioning of the motor to optimise the car's performance on track.

Soporte motor AWF offset 2.5 especial para camiones.

Anglewinder

AWF offset 2.5 motor mount specially for trucks.

Fabricante: CDC Slot

Ref: CDC-SMAWF2.5

€7.00

AWF motor mount with 2.5 offset from CDC Slot, specifically designed for slot trucks. It accepts ball bearings or 1-tab bushings from most brands on the market, facilitating the preparation and tuning of your model.

Anglewinder

RT4 special truck bench with 2.5 offset

Fabricante: CDC Slot

Ref: CDC-AW12CJ52.

€6.50

AW12CJ5 chassis from CDC Slot with 2.5 offset, specifically designed for truck bodies on SKRT4 chassis. Includes adjustable front and rear suspension bridges without removing the body, five anchor points, and compatibility with long can type Boxer motor.

3D chassis, Fibre, Metal..

Estab Bridge/Suspension Mounting on Bench/RT4 springs BlackArrow

Fabricante: 3DSRP

Ref: SRP018108

€2.48

Stabiliser bridge for suspension and rear springs for the RT4 chassis by BlackArrow, manufactured by 3DSRP in ASA filament with carbon fibre using FDM 3D printing. Strength, lightness, and precision fit in every assembly.

In Stock

Anglewinder

Offset motor mount 1.0mm Angewinder EVO6

Fabricante: SLOT.IT

Ref: SICH82c

€9.21

Motor mount with a 1.0 mm offset for anglewinder mounting, specifically designed for the Slot.it EVO6 chassis. A reference piece when you need to accurately adjust the motor position and fine-tune the transmission.

Soporte de motor Offset 0,5mm Angewinder Carbon EVO6

In Stock

Anglewinder

Offset Motor Mount 0.5mm Angewinder Carbon EVO6

Fabricante: SLOT.IT

Ref: SICH60c

€9.10

Carbon Anglewinder motor mount with a 0.5 mm offset, specifically designed for the EVO6 chassis. Stiffness, low weight, and precision geometry to fine-tune track setup and achieve maximum performance in competition.

Soporte de motor Angewinder Carbon EVO6 Offset 1,25mm Rodamient

In Stock

Anglewinder

Offset Motor Mount 1.25mm Angewinder Carbon EVO6 Bearings

Fabricante: SLOT.IT

Ref: SICH124

€8.91

Anglewinder chassis in carbon EVO6 from Slot.it with an offset of 1.25 mm and integrated bearings. A reference piece for those seeking geometric precision and structural rigidity in competition slot car setups.

In Stock

Anglewinder

Offset Motor Mount 1.25mm Carbon Anglewinder EVO6

Fabricante: SLOT.IT

Ref: SICH123

€8.91

Slot.it carbon motor mount for Anglewinder installation with a 1.25 mm offset, designed in the EVO6 series for those seeking precise mounting and minimal weight in every crucial tenth.

Soporte motor AW Offset 1,0mm EVO6 Duro Rodamientos

Anglewinder

AW Offset Motor Mount 1.0mm EVO6 Hard Bearings

Fabricante: SLOT.IT

Ref: SICH119b

€7.18

The Anglewinder Offset 1.0 mm EVO6 Hard motor mount with Slot.it bearings is the choice for those seeking mechanical precision and backlash-free transmission. Stiffness, reliability, and millimetric adjustment in a part designed for competition.

SICH118C Soporte de motor Angewinder Carbono Offset 0,5mm Rodamientos Slotit

Anglewinder

Offset motor mount 0.5mm Angewinder Carbon EVO6 Bearing

Fabricante: SLOT.IT

Ref: SICH118c

€8.86

Carbon EVO6 Anglewinder motor mount with a 0.5mm offset and bearing integration. A reference piece from Slot.it for those seeking precise adjustment, structural rigidity, and maximum performance on track.

Soporte de motor Angewinder Carbono Offset 0,0mm Rodamientos

Anglewinder

Offset Motor Mount 0.0mm Angewinder Carbon EVO6 Bearings

Fabricante: SLOT.IT

Ref: SICH117c

€8.91

Precision and lightness in a single component: the Anglewinder support in carbon fibre EVO6 from Slot.it with an offset of 0.0mm is designed for standard and Flat motors, prepared to accommodate SICH105 ball bearings or similar (not included).

Anglewinder

CDC Slot 1.0 anglewinder motor mount

Fabricante: CDC Slot

Ref: CDC-SMAW1.0

€5.96

CDC Slot 1.0 offset anglewinder motor mount, 3D printed, compatible with 1-lip bearings. Includes two chassis anchoring systems —H pivot type Slot.it and single pivot T pivot— plus lateral adjustment of the pinion for precise gearing with the crown gear.

Showing 25-48 of 93 item(s)