Ultralight wheel Wolfie 16.2 mm

Wolfie Ultralight: Mechanical Precision for 1/32 Slot Racing Competition

Within the 3D wheel category of the T800 line, the 16.2 mm Wolfie is a piece designed with a clear objective: to minimise rotational mass without compromising structural integrity. Weighing only 0.36 grams and made for 3/32 axles, it is a direct choice for tuners and club drivers who fine-tune every tenth in their 1/32 setups.

Function and Performance

Rotational mass is one of the factors that most affects the dynamic response of a slot car. A heavier wheel increases the gyroscopic effect, slows down the response to acceleration changes, and complicates braking in late braking zones. The Wolfie directly addresses this issue: with its 0.36 g, it allows the wheel-tyre assembly to react with an immediacy that is difficult to achieve with conventional wheels.

At the same time, its design does not sacrifice stiffness. The wheel withstands deformation under the strain of high-torque motors or in configurations with strong lateral support in corners, making it equally valid on pure speed circuits as well as on technical layouts with tight chicanes.

Compatibility and Assembly

• Diameter: 16.2 mm
• Compatible axle: 3/32
• Usage category: 1/32 spare parts, 3D wheels from the T800 line

High-precision machining ensures optimal concentricity on the 3/32 axle from the first assembly. This eliminates parasitic vibrations that, although imperceptible to the naked eye, degrade the tyre's contact with the track and cause grip loss, especially in fast sections where the car operates with low aerodynamic load.

Assembly and Preparation

The assembly process does not require special tools beyond those typically found in any slot preparation bench. It is advisable to check the centring with a dial gauge or, if not available, to spin it on the axle before gluing the tyre, to confirm that there is no visible deviation. Given its reduced weight, balancing the assembly is straightforward and rarely requires additional corrections.

To secure the tyre, apply a minimal amount of adhesive: the wheel, being ultralight, does not need to compensate for mass irregularities, and excess glue can create unnecessary imbalances.

Common Mistakes

• Mounting an oversized tyre: a tyre that does not correspond to the 16.2 mm diameter can create stresses that alter the factory-achieved concentricity.
• Over-tightening the axle fixing screw: in ultralight wheels, excessive tightening can cause micro-deformations. Adjust firmly, but without forcing.
• Not checking the centring after assembly: although factory concentricity is high, any impact during transport can affect it. Always verify before going on track.

Ideal for…

This wheel fits particularly well in setups aimed at club or federated competition in 1/32 scale, where every gram on the wheels has a direct impact on lap times. It is also a very interesting option for those experimenting with different tyre configurations in search of the balance between traction and response, thanks to the ease of replacement offered by its mounting on a 3/32 axle.

Frequently Asked Questions

What axles is the 16.2 mm Wolfie wheel compatible with?

It is exclusively compatible with 3/32 axles, the most widely used standard in 1/32 scale competition setups.

How much does it weigh exactly and why does that matter?

It weighs 0.36 grams. In a wheel, reducing weight means less rotational inertia: the car brakes sooner, accelerates with more immediacy, and responds better to direction changes. In tight competition, that difference translates into real tenths per lap.

Can this wheel be used in configurations with high-torque motors?

Yes. Although it is an ultralight wheel, its design incorporates the necessary stiffness to withstand the work of high-torque motors without deforming or losing concentricity.

Is it compatible with any tyre with a 16.2 mm outer diameter?

In principle, yes, as long as the tyre is designed for a wheel diameter of 16.2 mm. Check the specifications from the tyre manufacturer to confirm exact compatibility before assembly.

How many units does reference T850002 include?

The available information does not specify the exact content of the blister. We recommend checking it on the product sheet or contacting us directly before placing the order.

Is it suitable for use on rally circuits and speed circuits?

Yes. Its balance between reduced weight and structural stiffness makes it versatile: it performs well on layouts with many slow corners as well as on high-speed circuits where braking stability is critical.

Wolfie ultralight 16.2mm slot car rim, 3/32 axle compatible, 0.36g precision wheel for 1/32 scale competition. Lightweight slot car component from the T800 range, designed for club and high-performance racing. Minimal rotational inertia, high concentricity, suitable for demanding motorsport configurations.