LIMITER KIT - SUSPENSION STOPS

Total control of chassis travel with the SP116001 suspension limiters from Sloting Plus

When fine-tuning the suspension makes the difference between winning and losing, having the right tools is not a luxury: it is a necessity. The SP116001 kit from Sloting Plus brings together twelve aluminium limiters —four of each height— designed for you to accurately define how far your suspension system works.

Features and specifications

• Material: machined aluminium.
• Compatibility: M2 suspension screw.
• Available heights: 1.5 mm, 2 mm and 2.5 mm.
• Contents: bag with 4 + 4 + 4 units (12 in total).

Function and performance

The purpose of these limiters is simple yet critical: they restrict the chassis travel independently of the spring compression. This means you can adjust how much the chassis "travels" without compromising the stiffness or progression of the spring you have chosen. An especially valuable advantage when working with springs of different lengths —short, medium or long— and needing the assembly to behave consistently.

Moreover, being stackable, the limiters can be combined to achieve intermediate or greater heights than the three standard measurements, significantly expanding tuning possibilities without the need for additional parts.

Compatibility and applications

These stops fit any motor mount or suspension system that uses an M2 screw, making them suitable for a wide variety of chassis on the market. They are particularly useful in models with limited space under the body, where installing another type of damping system is complicated or directly unfeasible.

Assembly and preparation

The assembly does not require special tools: they are simply inserted into the M2 suspension screw before adjusting the assembly. The key is to test different height combinations during track testing, noting the handling sensations to find the optimal travel point according to the layout and the type of tyre used.

Frequently asked questions

Can I combine limiters of different heights on the same screw?

Yes. One of the advantages of this kit is that the limiters are stackable, allowing for intermediate or greater heights than the three included measurements by combining several units.

Are they compatible with any suspension system?

They are compatible with any motor mount or suspension system that uses an M2 suspension screw, which is the most widely used standard in the preparation of competitive slot cars.

How many units does the bag contain?

The bag contains a total of 12 units: 4 of 1.5 mm, 4 of 2 mm, and 4 of 2.5 mm in height.

What is the difference between adjusting the spring and adjusting the limiter?

The spring controls the damping force and the progression of the suspension. The limiter, on the other hand, defines the maximum travel of the chassis. With this kit, you can modify one without affecting the other, providing much greater precision in tuning.

For what type of track or layout are they most useful?

They are especially useful on layouts with elevation changes, raised rail joints, or tracks with irregularities, where controlling the chassis travel prevents the car from "bouncing" or losing grip at critical points.

The Sloting Plus SP116001 suspension limiter kit is an essential tuning accessory for slot car racing enthusiasts. Made from aluminium and compatible with M2 suspension screws, this set includes 12 pieces in three heights (1.5 mm, 2 mm and 2.5 mm) to precisely control chassis travel. Stackable design allows custom height combinations to suit any spring length or track layout. A must-have for competitive slot car preparation and fine-tuning.