The sheet with a gauge of 0.5 mm

Competition Precision for Your Slot Car Chassis Setup

The T800 plate with a 0.5 mm gauge is a reference in the workshop of any driver who takes the preparation of their car seriously. Designed to provide a flat and stable surface, it allows for quick and reliable verification of the clearance between the chassis and the track, that critical margin that makes the difference between passing or failing a technical inspection.

Function and Performance

The purpose of this tool is clear: you place the car on the plate, and the 0.5 mm gauge accurately indicates whether the chassis is touching or maintaining the regulatory space relative to the running surface. There are no visual estimates or approximations: it either passes or it does not.

• Integrated 0.5 mm gauge for direct verification of chassis clearance.
• Guaranteed flat surface that also serves as a reference to detect twists or deformations in the chassis.
• Robust construction that ensures consistent and repeatable readings over time.

Applications in the Workshop

Beyond regulatory verification, this plate is a valuable support during car setup:

• Adjustment of front axle height to optimise cornering behaviour.
• Checking the overall balance of the chassis on a level base.
• Reference for torsion adjustments, ensuring all four wheels are correctly supported.
• Pre-race verification for club races or official competitions, avoiding surprises during technical control.

Ideal for…

Any driver competing regularly in categories where the technical regulations establish a minimum ground clearance will find this tool a direct ally. It is also very useful for preparers working with multiple cars who need a quick and uniform check between units.

Aspects to Consider

The gauge is specifically designed for the 0.5 mm measurement. If your club regulations require a different tolerance, check which T800 reference fits that value before acquiring this tool.

Frequently Asked Questions

What is the exact purpose of the 0.5 mm gauge?

It allows you to check that there is a minimum space of 0.5 mm between the car chassis and the track surface. It is a common measurement in slot racing regulations to prevent the car from improperly rubbing and gaining an advantage from prohibited mechanical grip.

Can I also use it to adjust the chassis torsion?

Yes. By placing the car on the flat surface of the plate, you can easily observe if any of the wheels are not properly supported, indicating torsion in the chassis. It is one of the most common uses in the preparation workshop.

Is it compatible with any scale or type of slot car?

The tool is valid as long as the regulations of your category establish a clearance of 0.5 mm. Compatibility depends on the applicable technical regulations, not on the scale of the car itself.

Do I need advanced knowledge to use it?

No. Its use is intuitive: place the car on the plate and insert the gauge under the chassis to verify the space. In a few seconds, you have a clear and unambiguous reading.

How often should I perform this verification?

It is recommended to do this before each competition session or whenever you have made adjustments to the chassis, front axle height, or bodywork. A small change can alter the clearance and expose you to exclusion during technical control.

The T800 0.5 mm setup plate is a professional slot car chassis tuning tool designed for competitive use. It provides a perfectly flat reference surface combined with a 0.5 mm feeler gauge to verify chassis ride height and legal ground clearance, ensuring compliance with technical regulations in club and official slot car racing. Essential for any serious slot car racer looking to fine-tune chassis setup with reliable, repeatable results.