M2.1 x 5 T6 TORX screw

The screw that slot enthusiasts have been waiting for: TORX T6, metric 2.1 and zinc-plated finish for 1/32 bodies.

Sloting Plus has completely rethought the body screw with this M2.1 x 5 mm T6 TORX. An apparently small change that, in practice, makes a real difference in the preparation workshop and in the club's pit box.

Technical features

• Thread: M2.1
• Total length: 5 mm
• Head: TORX T6
• Material: Steel with zinc-plated finish (light colour)
• Contents: Bag of 20 units
• Reference: SP159911

Why TORX T6 and not Phillips?

The TORX profile transmits torque much more evenly than a Phillips head. This translates into two specific advantages: the screwdriver does not slip and the screw does not get "eaten" with repeated use. In a hobby where we loosen and tighten bodies hundreds of times throughout a season, the difference in durability is noticeable. Additionally, the T6 profile allows the screw to be retained in the tip of the screwdriver, facilitating assembly in hard-to-reach areas.

Why metric 2.1?

The choice of M2.1 is not arbitrary. According to Sloting Plus, it is the optimal size for 1/32 bodies: an M2 is somewhat loose and does not fit with the necessary firmness, while larger metrics (M2.2 or greater) can force the body post to break. The M2.1 occupies that perfect balance point between solid grip and respect for the body material.

The zinc-plated finish: more than aesthetics

The light colour of the zinc plating not only protects the steel against oxidation; it also serves as an immediate visual reference. Any user who has used the previous black phosphated Phillips screws will instantly distinguish which is which in the toolbox, avoiding confusion at the least opportune moment.

Assembly and preparation

To get the most out of this screw, use a TORX T6 screwdriver in good condition. Apply constant and perpendicular pressure to the screw during tightening, without over-tightening: the natural resistance of the TORX profile already guarantees a firm closure without the need to over-tighten. If you are reusing the posts of bodies already drilled with Phillips, check beforehand that the drill diameter is compatible with metric 2.1.

Frequently asked questions

Do I need a special screwdriver for these screws?

Yes, you need a T6 TORX screwdriver. It is not compatible with Phillips or standard star screwdrivers. Sloting Plus and other brands in the sector offer specific tools for this profile.

Are they compatible with bodies that used Phillips screws?

It depends on the diameter of the existing hole in the body. If the post is already drilled for M2.1, the replacement is direct. If it was prepared for another metric, it may be necessary to re-drill.

How many units does the bag contain?

Each bag contains 20 M2.1 x 5 mm T6 TORX screws.

Do they work with any 1/32 body?

They are designed for slot car bodies in 1/32 scale. Their specific suitability will depend on the fastening system of each body. Check the specifications of your body before making the change.

Why is the finish light-coloured and not black?

The light zinc-plated finish makes it easier to visually distinguish them from the old black phosphated Phillips screws, avoiding confusion. Additionally, the zinc plating provides extra protection against corrosion.

The Sloting Plus SP159911 is a M2.1 x 5 mm T6 TORX screw specifically designed for 1/32 scale slot car bodies. Made from zinc-plated steel, it offers superior grip and durability compared to traditional Phillips screws, preventing driver slippage and protecting body mounting posts. Ideal for slot car preparation, club racing, and home workbench use. Pack of 20 units. Compatible with Scalextric, Ninco, Scaleauto, Slot.it and other 1/32 slot car bodies.