Slot PRO Tool Pack

The tool pack that every slot racer needs on the workbench

When detail makes the difference between winning and losing, tools matter as much as parts. The Pack Herramientas Slot PRO brings together everything essential for preparing, maintaining, and adjusting slot cars with real precision: from the controlled tightening of crowns and wheels to professional lubrication of the transmission, along with the organisation of the competition case.

Detailed contents of the pack

Torque adjustment

Two high-precision screwdrivers with tips of 0.9 mm (Ref. SP141001) and 1.3 mm (Ref. SP141002). Essential for working on studs, wheel threads, and crowns without straining the material or exceeding torque. One of the most common causes of mechanical failures in competition is, precisely, excessive or uneven tightening.

Transmission maintenance

• UNIVERSAL Press and Extractor by Sloting Plus (Ref. SP140008): reference tool for mounting and dismounting pinions with total control, without damaging shafts or bushings.
• M2 Thread Tap (Ref. SP143702): recovers damaged threads in metal components and facilitates the cleaning of threads before final assembly.

Competition lubrication

• LUBBGREASE (Ref. SP120101): special grease for pinion gears, formulated to work continuously under the demands of competition.
• LUBBOIL Nº 5 (Ref. SP120005): state-of-the-art lubricant with ceramic nanoparticles that reduces friction to a minimum in bearings and shafts.

Finishing and fine work

• Modelling cutter (Ref. VAT06006): clean cuts on bodies, decals, and plastic parts.
• Stainless steel round-nose pliers (Ref. VAT12007): precise handling of small components without marking them.
• Fibreglass cleaning pen (Ref. VAT15001): effective cleaning of electrical contacts and metal surfaces.
• Set of 5 diamond files (Ref. VAT03002): adjustment of plastic parts, resins, and any component requiring fine dimensional correction.

Axle preparation

Pro reamer with red plastic and aluminium handle (Ref. SC-5079F), compatible with sizes of 3 mm, 3/32 and 2 mm. Essential for aligning and cleaning bearing housings and ensuring free rotation of the axle, especially after chassis changes or assemblies with tight tolerances.

Professional organisation

• Storage box for 20 T800 transverse crowns (Ref. T870010).
• Storage box for 10 wheels or tyres of 10 mm × 20 mm (Ref. T870013).

Two specific boxes that maintain order within the competition case and prevent parts from mixing or damaging during transport.

Who is this pack intended for?

This set is aimed at the club racer who wants to make the leap to a more methodical preparation, the regular tuner looking to centralise their tools in a single coherent pack, and also for those who want to give something with real meaning to a demanding enthusiast. Everything included has direct use on the workbench: there is no filler.

Frequently asked questions

Are the tools in the pack compatible with all slot scales?

For the most part, yes. The screwdrivers, files, pliers, fibreglass pen, and lubricants are for general use. The Pro reamer covers the most common axle sizes in slot (3 mm, 3/32 and 2 mm), and the universal press by Sloting Plus is designed to work with the standard diameters of the hobby.

What is the difference between LUBBGREASE and LUBBOIL Nº 5?

LUBBGREASE is a grease with a consistency designed for pinion gears, where it is necessary for the lubricant to remain at the point of contact. LUBBOIL Nº 5 is a very low viscosity oil with ceramic nanoparticles, more suitable for bearings and shafts, where fluidity and friction reduction are priorities.

What exactly is the fibreglass pen used for?

It is used to mechanically clean electrical contacts —such as those of the guide or motor terminals— removing oxidation, dirt, and layers of accumulated grease without damaging the base metal. It is a common tool on the workbench of any tuner who cares about the electrical continuity of the car.

Does the Pro reamer also serve to clean the bearing housings in the chassis?

Yes. It is precisely one of its main uses: passing the reamer through the bearing housings ensures that there are no burrs or remnants of material that compromise the free rotation of the axle, something especially important when working with plastic chassis or after an impact on track.

Are the storage boxes rigid?

Yes, they are rigid boxes specifically sized for T800 transverse crowns and for wheels/tyres of 10 mm × 20 mm. They are designed to fit in standard competition cases and protect the parts during transport.

Is it a good gift for someone starting in slot racing?

It can be if the recipient already has some foundation and is taking the step towards actively preparing their cars. For a complete beginner, some tools like the M2 thread tap or the pinion press may seem advanced. For someone of medium-high level, this pack is a very coherent gift with immediate use.

The Pack Herramientas Slot PRO is a comprehensive professional slot car tool set designed for competitive tuning and workshop preparation. It includes precision torque screwdrivers (0.9 mm and 1.3 mm), a universal pinion press and extractor by Sloting Plus, M2 thread tap, LUBBGREASE gear lubricant, LUBBOIL Nº 5 ceramic nanoparticle oil, a craft knife, stainless steel round-nose pliers, a fibreglass cleaning pen, a 5-piece diamond file set, a Pro reamer compatible with 3 mm, 3/32 and 2 mm axles, and two dedicated storage boxes for crowns and tyres. A must-have slot car maintenance kit for club racers and serious hobbyists looking for a real edge at the workbench.