RACING TYRES C1

Slot.it Racing C1 Tyres: The Track Contact That Makes the Difference

Tyres are, along with the guide and chassis setup, one of the three pillars of performance in slot racing. An incorrect tyre —whether due to hardness, profile, or diameter— can ruin the setup of a perfectly prepared car. The Racing C1 Tyres (SIPT1228C1) from Slot.it, identified under the technical reference DWG 1228, meet this demand with a compound and geometry designed for competition.

Main Features

• Reference: SIPT1228C1 / DWG 1228
• Name: Racing C1
• Brand: Slot.it
• Compound aimed at grip on Sport track (Scaleauto, Slot.it) and Universal track (Scalextric, Ninco)
• Profile and hardness typical of the Racing segment, designed to reduce lateral slip and improve corner traction

Function and Performance

The designation Racing in the Slot.it range indicates a softer and stickier compound than general-use references, resulting in better instant grip and greater sensitivity to chassis configuration changes. The suffix C1 identifies the specific profile of this tyre within the DWG 1228 family, determining its section and outer diameter.

This type of tyre works particularly well in Inline and Anglewinder setups, where the torque transfer to the rear axle is direct and any loss of grip is immediately noticeable in the car's behaviour. It is also suitable for Sidewinder configurations as long as the weight on the rear axle is well balanced.

Compatibility and Fitting

As a Slot.it product, its fit on wheels of the same brand is direct. For fitting on third-party wheels, it is advisable to check that the inner diameter of the tyre corresponds with the outer diameter of the wheel before installation. An excessively tight fit can deform the profile and alter track behaviour; if necessary, a brief soak in lukewarm water can help facilitate fitting.

As with any soft compound tyre, it is advisable to perform a few laps at a moderate pace before pushing them to the limit, allowing the compound to reach its optimal working temperature.

Ideal for…

• Club drivers looking for a proven tyre reference from a recognised brand
• Tuners wanting to explore different compounds and profiles to fine-tune the setup
• Enthusiasts who assemble or restore Slot.it cars and wish to maintain original specifications or close to them

Considerations

Racing compound tyres are more sensitive to heat and track abrasiveness than harder rubber tyres. On tracks with a lot of dust or uneven surfaces, they can accumulate dirt more quickly, which advises cleaning them periodically with a slightly damp cloth to maintain grip in optimal conditions.

Frequently Asked Questions

What does the suffix C1 mean on these tyres?

The suffix C1 identifies the specific profile within the Slot.it DWG 1228 reference, determining the cross-section and outer diameter of the tyre. This is a key piece of information to ensure compatibility with the correct wheel.

Are they compatible with wheels from other brands?

In principle, yes, as long as the inner diameter of the tyre matches the outer diameter of the target wheel. We recommend checking the measurements before fitting to avoid profile deformation.

What is the difference between a Racing tyre and a standard one?

Racing tyres use a softer compound, providing greater grip at the cost of slightly accelerated wear. Standard tyres are harder, last longer, but offer less pure grip. The choice depends on the type of use: competition or recreational running.

Do they need to be run in before using them in competition?

It is highly recommended. A few laps at a moderate pace allow the compound to reach its optimal temperature and ensure the tyre seats correctly on the wheel, thus offering maximum performance from the first timed segment.

What motor configurations do they work best with?

They are suitable for Inline, Anglewinder, and Sidewinder setups. In any case, the chassis configuration and weight distribution decisively influence the utilisation of the grip offered by the tyre.

Slot.it Racing C1 tyres (SIPT1228C1 / DWG 1228) deliver consistent grip and reliable performance for slot car racing enthusiasts. Compatible with Sport and Universal track systems, these soft-compound tyres suit Inline, Anglewinder, and Sidewinder motor configurations, making them a trusted choice for club racing and home track setups alike.

Information Not Available

It has not been possible to confirm through verified sources the exact outer diameter, inner diameter, or section width of this tyre. We recommend consulting the official technical sheet from Slot.it or contacting our team to resolve any compatibility questions before ordering.