Thunderslot rear slick tyres for Carrera: precise contact in every corner
The rear tyres are one of the most influential factors in the behaviour of a slot car on the track. An inadequate profile and hardness can ruin the most careful setup; with the correct ones, the car conveys confidence, holds the throttle, and flows through corners smoothly. Thunderslot knows this well, which is why it develops specific tyres for each application and track system.
Tyre features
- Dimensions: 19 x 10.8 mm (diameter x width).
- Position: rear axle.
- Type: slick, no tread, to maximise the contact surface.
- Declared compatibility: Carrera track.
- Reference: TH-TYR005RX.
Function and performance
The slick design eliminates any channel or groove in the tread, so the entire surface of the tyre makes contact with the rail. This translates to greater traction, less lateral slip, and a more direct response to the throttle. On plastic tracks like Carrera, where grip can vary depending on the surface condition, having a high-quality tyre makes a real difference in lap times.
The width of 10.8 mm provides a generous footprint for the 19 mm diameter, balancing braking stability and cornering agility. It is a common format in club-oriented competition setups, where consistency from lap to lap is sought over peak performance spikes.
Compatibility and installation
These tyres are intended for Carrera track. Before mounting them, it is advisable to verify that the diameter and width of the tyre are compatible with your car's wheel hub and that there is no interference with the body or chassis. A clean installation, without bubbles or misalignment, is key for the tyre to work correctly from the first lap.
If your car requires tyre truing to match the diameter with the opposite axle or adjust the ride height, always do it with the car assembled and at low speed, using fine-grit sandpaper to avoid deforming the profile.
Ideal for…
- Drivers racing on Carrera track at club or home level seeking a reliable and consistent tyre.
- Preparers wanting to explore tuning without significant investments.
- Those replacing stock tyres with aftermarket options to improve car performance.
Considerations
Always check the tyre fit on the wheel hub before running: a loose tyre can shift laterally and cause erratic behaviour. If you use glue to secure it, apply a minimal amount and allow it to cure properly before the first session.
Frequently asked questions
How many units are included in the pack?
The information provided by the manufacturer does not specify the number of units per pack. We recommend checking the product sheet in-store or contacting us before placing your order.
Are these tyres exclusive to Carrera track?
Yes, according to the manufacturer's specification, they are designed for use on Carrera track. For other systems like Scalextric, Ninco, Scaleauto, or Slot.it, Thunderslot has different references adapted to each case.
Do I need to true the tyres before using them?
It is not mandatory, but it is recommended if you want to achieve maximum performance. A small truing ensures that both rear tyres have exactly the same diameter, which improves traction and avoids pulls in a straight line.
What glue should I use for mounting?
Most preparers use low-viscosity cyanoacrylate applied in small amounts. There are also specific adhesives for slot tyres that allow for easier disassembly if you need to change them or adjust the setup.
What is the difference between a slick tyre and one with tread?
A slick tyre has no tread, so its entire surface contacts the track. This increases grip under normal conditions on plastic track. Treaded tyres are mainly used for aesthetics or in very specific applications where a different behaviour profile is sought.
Thunderslot rear slick tyres 19 x 10.8 mm for Carrera track — reference TH-TYR005RX. High-grip slot car rear tyres designed for Carrera systems, offering consistent traction and reliable lap-to-lap performance. A popular aftermarket upgrade for club racing and home track enthusiasts looking to improve their car's handling and contact patch on plastic track surfaces.