Front wishbones

Front Suspension Arms for Sakura D3: Direct Replacement for Your Chassis

When the front suspension starts to show wear or suffers an impact on track, having the correct replacement makes the difference between a lost session and getting back on track in minutes. These front suspension arms with reference 3RAC-SAK-D102 are specifically designed for the Sakura D3 chassis, ensuring a precise fit and the restoration of the original steering geometry.

Function and Performance

The front suspension arms are one of the most important structural elements of the suspension in an RC car. Their function is to transmit steering movement and maintain the alignment of the front wheels under any load condition. A damaged or deformed arm directly affects steering response, braking stability, and the overall handling of the car in corners.

With this original replacement, you restore the factory setup of the Sakura D3 without the need for additional adjustments, reducing the time between the incident and returning to the track.

Compatibility

• Chassis: Sakura D3
• Reference: 3RAC-SAK-D102

If you have doubts about whether this replacement is compatible with your specific version of the Sakura D3, we recommend checking the reference against the official manufacturer's parts list or contacting us directly.

Assembly and Preparation

The assembly follows the standard procedure for the Sakura D3 chassis. Before installing the new arms, take the opportunity to check the condition of the ball joints, pins, and associated screws. Changing the arms is a good opportunity to check the wear of all the front suspension components and clean the area of any accumulated dirt.

Adjust the preload and steering geometry after assembly to ensure that the car responds exactly as you expect before the next session.

Frequently Asked Questions

Are these arms compatible with other models in the Sakura range?

The reference 3RAC-SAK-D102 is specifically indicated for the Sakura D3. Compatibility with other versions or models in the Sakura range is not confirmed, so we recommend verifying this before placing your order.

Are they sold in pairs or is it a single unit?

The available information does not specify the exact number of units included. Please check the product description or contact us to confirm before placing your order.

Do I need special tools for assembly?

The assembly does not require tools outside of the usual ones for RC car maintenance. A standard set of Allen keys and screwdrivers from your usual toolkit is sufficient.

How often should I check the front suspension arms?

It depends on usage and track type. In competition, it is advisable to check the condition of the arms after each intense day, especially if there have been contacts or off-track incidents. For recreational use, a periodic check every few sessions is more than sufficient.

Replacement front suspension arms for the Sakura D3 chassis, reference 3RAC-SAK-D102. Essential RC spare part to restore steering geometry and handling performance after wear or impact damage. Direct fit for Sakura D3, no modifications required.

Information Not Available

It has not been possible to confirm the manufacturing material, the exact number of units per package, or possible additional compatibilities with other versions of the Sakura chassis. If you need this information, we recommend contacting us directly or reviewing the official documentation from the manufacturer.