Tyre changer Rim 15.8-16.2

When tyre changes in competition leave no room for error, the T800 tyre changer for 15.8-16.2 mm rims gets the job done cleanly and safely.

Preparing a slot car for racing involves many details, but few are as critical as the correct seating of the tyre on the rim. An extra twist, an improvised lever, or a rough assembly can misalign the rear axle, mark the aluminium, or leave the tyre improperly seated. The tyre changer T800 (ref. T870031) eliminates these variables with a controlled pressure mechanism specifically designed for the most common diameter range in 1/32 competition.

Function and Performance

The T870031 acts as both a support bench and a mounting/extraction tool at the same time. The rim sits completely flat throughout the process, ensuring that the tyre—whether air or silicone—remains perfectly centred from the first attempt. The effort required is minimal and evenly distributed, avoiding stress points that cause deformation.

• Compatibility range: rims from 15.8 mm to 16.2 mm in diameter.
• Application: mounting and dismounting of slot tyres (air and silicone).
• Compatible materials: plastic, aluminium, and magnesium rims.
• Reference: T870031.

Design for the Workshop and Race Kit

The compact structure of the T870031 makes it equally comfortable on the workbench at home as it is in the tool kit you take to the track. Its high-durability technical construction withstands the intensive use typical of endurance teams and sprinters who make several compound changes throughout a race day. It takes up no space, adds no unnecessary weight, and is ready to use as soon as you take it out of the bag.

Why It Makes a Difference in Competition

The dynamic balance of the rear axle largely depends on the tyre being perfectly seated and centred. An incorrect assembly, even if it is millimetric, results in vibration, loss of traction, and inconsistent lap times. With this tyre changer, the rim does not move during the process: the result is reproducible with each change, which is essential when working with high-grip silicone tyres or fine-tuning preparation between heats.

Frequently Asked Questions

What scale of slot cars is this changer designed for?

It is designed for the most common rim range in 1/32 scale, specifically for diameters between 15.8 and 16.2 mm. If you work in another scale, check the diameter of your rims before purchasing.

Is it compatible with aluminium rims without scratching them?

Yes. The controlled pressure mechanism and the design of the bench are conceived so that the rim sits flat without aggressive contact points, preventing marks on both aluminium and magnesium and plastic.

Does it work with both silicone and air tyres?

Yes, it is suitable for both types. The effort for mounting and dismounting is minimal in both cases thanks to the distributed pressure mechanism.

Can I use it directly in the pit area during a race?

Its compact format makes it perfectly portable. You can carry it in your tool bag and use it both on the workbench and in the pits without any problem.

Do I need any additional tools to use it?

No. The T870031 tyre changer is designed to operate independently; it does not require additional presses or complementary accessories to perform the tyre change.

The T800 tyre changer (ref. T870031) is a precision workshop tool designed for 1/32 slot car racing. Compatible with wheel diameters from 15.8 mm to 16.2 mm, it allows fast and damage-free tyre mounting and removal on plastic, aluminium and magnesium rims. Ideal for club racers and endurance teams who need reliable, repeatable tyre changes during race day. A compact, durable solution from T800 for serious slot car preparation.