Benches

We select each bracket for its manufacturing precision and its actual compatibility with the most commonly used chassis in competition. We know the component, not just the catalogue: we help you choose the compound, the offset, and the configuration that your setup needs.

Todos los productos Benches

Soporte de motor Offset 0,0mm Anglewinder EVO6
Last items in stock
Anglewinder

Angewinder Motor Mount Offset 0.0mm EVO6

Fabricante: SLOT.IT
Ref: SICH61C1
€12.90
Slot.it carbon fibre anglewinder motor mount, with an offset of 0.0 mm and EVO6 design. Designed for standard and Flat motors, it allows for precise installation without lateral deviation, ideal for demanding enthusiasts in the preparation of their competition cars.
Anglewinder motor mount 0,5mm offset - EVO6 - HARD - bearing version
Last items in stock
Anglewinder

Anglewinder motor mount 0.5mm offset EVO6 HARD bearing version

Fabricante: SLOT.IT
Ref: SICH118B
€7.18
The Slot.it anglewinder EVO6 HARD chassis (SICH118B) combines a 0.5 mm offset with integrated bearings and a rigid construction. Designed for those seeking maximum precision in motor mounting and consistent track response.
Soporte motor AWoffset 1.0mm duro - cojinetes EVO6
In Stock
Anglewinder

AW offset motor mount 1.0mm hard EVO6 bearings

Fabricante: SLOT.IT
Ref: SICH82B
€7.18
Slot.it anglewinder chassis in high hardness, with an offset of 1.0 mm and EVO6 bearings. Designed to mount the motor at the precise angle and extract maximum performance in 1/32 competition cars.
Anglewinder motor mount 0,5mm offset - EVO6 - HARD - bearing version
In Stock
Anglewinder

Anglewinder motor mount 0.5mm offset - EVO6 - HARD - bearing version

Fabricante: SLOT.IT
Ref: SICH118B2
€7.16
EVO6 anglewinder chassis from Slot.it in HARD version with bearings, designed to mount the motor with a 0.5 mm offset. Stiffness, precision, and low weight for those seeking maximum performance on track in 1/32 scale.
Bancada en ángulo EVO6 OFFSET 0,5 hard
Last items in stock
Anglewinder

SICH60B1 - Motor mount anglewinder 0.5mm offset (EVO 6) Hard bearings

Fabricante: SLOT.IT
Ref: SICH60b2
€7.16
Slot.it EVO 6 anglewinder chassis with 0.5 mm offset and Hard version bearings. Designed for those seeking a solid and geometrically precise base on which to build or fine-tune their drivetrain on Sport track.
Soporte motor ángulo offset 1.00mm
In Stock
Anglewinder

Motor mount offset angle 0.75mm

Fabricante: Avant Slot
Ref: AV20575c
€6.94
Avant Slot anglewinder chassis with an offset angle of 0.75 mm for 1/32 scale. A precision piece that allows for the adjustment of the motor position and optimises power transmission in competition setups.
Soporte motor rally angulo
In Stock
Anglewinder

Rally angle motor mount

Fabricante: Avant Slot
Ref: AV20575a
€6.94
Avant Slot anglewinder bracket with 0.00 mm offset for rally cars in 1/32 scale. Replacement part designed to maintain the exact geometry of the motor and ensure a clean and precise fit in your chassis.
Soporte motor ángulo offset 0.50mm
In Stock
Anglewinder

Motor mount offset angle 1.25mm

Fabricante: Avant Slot
Ref: av20575e
€6.94
Anglewinder motor mount with a 1.25 mm offset from Avant Slot, designed to precisely adjust the motor position in 1/32 setups. A key spare part for those looking to fine-tune the transmission geometry and squeeze every tenth on track.
Soporte motor ángulo offset 1.00mm
In Stock
Anglewinder

Offset angle motor mount 1.00mm

Fabricante: Avant Slot
Ref: av20575d
€6.94
Anglewinder motor mount with an offset angle of 1.00 mm from Avant Slot, designed for 1/32 scale. It allows for precise adjustment of the motor position and optimises the transmission in anglewinder configurations.
Soporte motor AW Rt4 Offset Ajustable
Last items in stock
Anglewinder

Motor mount offset angle 0.50mm

Fabricante: Avant Slot
Ref: av20575b
€6.94
Motor support anglewinder with an offset angle of 0.50 mm from Avant Slot, designed for 1/32 scale. It allows for precise adjustment of the motor position and optimises the power transmission to the rear axle in anglewinder setups.
Soporte motor SW Offset 1,0mm Rodamientos
In Stock
Sidewinder

SW Offset 1.0mm Motor Mount Bearings

Fabricante: SLOT.IT
Ref: SICH110
€6.95
The SICH110 from Slot.it is the Sidewinder motor mount with a 1.0 mm offset and integrated bearings, designed to precisely adjust the motor position in 1/32 configurations. A key component for those looking to fine-tune the setup on Sport track.
Soporte Motor Flat Offset -1mm
Last items in stock
3D chassis, Fibre, Metal..

Ferrari F40 GTR chassis SLOT.IT- POLICAR

Fabricante: 3DSRP
Ref: SRP-001069
€13.60
Anglewinder chassis manufactured by 3DSRP in ASA plastic using FDM 3D printing, specifically designed for the Ferrari F40 GTR body in 1/32 scale, compatible with Slot.it and Policar mounts. A precise technical solution for those looking to prepare or customise their slot car with expertise.
Anglewinder

Motor Mount Anglewinder Offset -0.70mm Sideways

Fabricante: Sideways
Ref: SWMAWGT3
€8.19
The anglewinder motor mount from Sideways with an offset of -0.70mm (ref. SWMAWGT3) allows for precise adjustment of the motor position in anglewinder configuration, fine-tuning the transmission geometry to maximise track performance.
Soporte de motor Offset 0,0mm Anglewinder EVO6
Last items in stock
Anglewinder

Angewinder Motor Mount Offset 0.0mm EVO6

Fabricante: SLOT.IT
Ref: SICH61C
€9.25
Slot.it Anglewinder EVO6 motor mount in carbon fibre, with an offset of 0.0mm. Designed for standard and Flat motors, it offers an angled motor position for optimal weight distribution in competition.
Separadores 3D cuna SC RT4
Out-of-Stock
1/32 spare parts

3D spacers cradle SC RT4

Fabricante: Ministry of Hobby
Ref: MH00625
€2.50
Six 3D spacers specifically designed for the SC-6531HD cradle from Scaleauto, with three different offset values (0.2, 0.3, and 0.5 mm) to fine-tune the motor position and achieve the best performance from your slot car.
Soporte motor In-line RT3Offset -0.5 xtra hard
Last items in stock
In Line

RT3 In-line Motor Mount Offset -0.5 xtra hard

Fabricante: Scaleauto
Ref: SC-6523C
€9.34
Scaleauto 4-point bracket for long can motors in inline configuration with -0.5 mm offset and xtra hard hardness. Includes screws, spherical bearings, and rear magnet ready to assemble.
Soporte motor Angewinder Offset 1,25 Rodamientos
Out-of-Stock
Anglewinder

Angewinder Offset 1.25 Motor Mount Bearings

Fabricante: SLOT.IT
Ref: SICH131
€7.18
Anglewinder motor mount with a 1.25 mm offset and bearing integration, from Slot.it. A tuning piece designed to precisely adjust the motor position and optimise the transmission in Anglewinder configuration.
Soporte de motor Angewinder Offset 1,25mm HARD
In Stock
Anglewinder

Angewinder Offset Motor Mount 1.25mm HARD

Fabricante: SLOT.IT
Ref: SICH130
€7.18
Anglewinder motor mount with a 1.25 mm offset in HARD version, designed by Slot.it for standard and flat motors. A key component for adjusting the motor position and fine-tuning your car's performance on track.
Soporte Motor Tipo RT4 (Carbono). Mecánica SLOT.IT offset 1.25mm.
Last items in stock
1/32 spare parts

RT4 Type Motor Support (Carbon). SLOT.IT mechanics offset 1.25mm.

Fabricante: 3DSRP
Ref: SRP00789
€8.00
RT4 type chassis printed in 3D with carbon filament (FDM) and an offset of 1.25 mm, specifically designed to mount Slot.it mechanics —both pinion and crown gear—. A technical and lightweight piece for those who fine-tune every detail of their slot car.
Soporte Motor Tipo RT4 (Carbono). Mecánica SLOT.IT offset 1mm.
Out-of-Stock
1/32 spare parts

RT4 Type Motor Support (Carbon). SLOT.IT mechanics offset 1mm.

Fabricante: 3DSRP
Ref: SRP00788
€8.00
RT4 type chassis manufactured by 3dsrp using FDM 3D printing in carbon material, with an offset of 1 mm. Specifically designed to mount Slot.it mechanics —both pinion and crown gear— with precision and firmness from the first assembly.
Soporte motor F1 para motores Flat
Last items in stock
Body parts

F1 motor mount for Flat motors

Fabricante: Policar
Ref: PO-PCH10
€7.89
The Policar F1 PO-PCH10 motor mount is specifically designed for Flat motors, allowing for precise and secure mounting on single-seater chassis. A preparation piece aimed at those looking to get the most out of their Formula 1 slot cars.
Puente estabilizador suspensión Bancada RT4 Sca
Last items in stock
3D chassis, Fibre, Metal..

RT4 Sca Suspension Stabiliser Bridge

Fabricante: 3DSRP
Ref: SRP018109
€2.56
3D printed part in ASA filament with carbon fibre, specifically designed as a stabiliser bridge for RT4 SCA chassis with SCA springs. Precision FDM manufacturing for direct integration into your setup.
Soporte motor SW Offset 1,0mm Rodamientos
Out-of-Stock
Sidewinder

SW Offset 1.0mm Motor Mount Bearings

Fabricante: SLOT.IT
Ref: SICH115B
€6.95
Slot.it motor mount in Sidewinder configuration with a 1.0 mm offset and bearing integration. An essential part for fine-tuning the transmission and improving track response with maximum precision.
3D chassis, Fibre, Metal..

Motor Support Line (Specific for NSR F1-22)

Fabricante: 3DSRP
Ref: SRP00786
€6.40
3D-printed chassis using FDM by 3dsrp, specifically designed for the NSR F1-22. With height adjustment, it allows precise positioning of the motor to optimise the car's performance on track.
Showing 25-48 of 165 item(s)
Product added to wishlist

Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Para dar su consentimiento sobre su uso pulse el botón Acepto.