Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Cojinete COMBI PLUS EVO 29,5 mm. fabricado en duraluminio y latón.
Bearings

COMBI PLUS EVO bearing 29.5 mm.

Fabricante: Sloting Plus
Ref: SP053106
€8.00
The evolution of the reference bearing from Sloting Plus: the COMBI PLUS EVO 29.5 mm. combines high-quality duraluminium and brass to minimise friction, gain traction on the rear axle, and shave tenths off each lap. Suitable for 3D chassis and NSR or compatible triangular mounts.
Carrocería Scaleauto lista para decoración y montaje.
In Stock
Body shell

LMBH Supertrofeo Evo2 body -white- SC-3642

Fabricante: Scaleauto
Ref: SC-3642
€28.00
Official Scaleauto body of the LMBH Supertrofeo Evo2 in full white finish, ready to paint and customise. Direct fit onto the corresponding chassis, aerodynamic lines true to the original and optimised weight for competition in GT and Endurance categories at 1/32 scale.
Set de recambios cabezal y clips para motor tester
Herramientas

Spare parts set for motor tester head and clips

Fabricante: Scaleauto
Ref: SC-5069I
€2.96
Original Scaleauto spare parts for the measurement head and the motor tester contact clips. Maintain the reliability of your readings by replacing worn components with parts specifically designed for this equipment.
vista del Skoda Fabia Rally2 decoración Cohete Suárez Ourense.
Last items in stock
Modern Rally

Skoda Fabia Rally2 Rally Ourense 2024 n1 J.A. Suarez R Version

Fabricante: Scaleauto
Ref: SC-6445R
€87.95
Official R-Version replica of the Skoda Fabia Rally2 with which J.A. "Cohete" Suárez competed in the Ourense Rally 2024. Soft grey in-flex chassis, SC-0027 motor with 18,000 rpm, RT3 mount with –0.5 mm offset and 8/31 transmission on hardened steel axles: all designed to run fast from the first stage.
mitsubishi-evo-vi-omv-scaleauto-sc-6370r-mecanica.jpg
Last items in stock
Classic Rally

Mitsubishi Evo VI OMV Rally Monte Carlo 2000 no. 21 Stohl / Muller

Fabricante: Scaleauto
Ref: SC-6370
€68.00
1/32 scale reproduction of the Mitsubishi Lancer Evo VI OMV nº21 of Manfred Stohl and Peter Müller in the 2000 Monte Carlo Rally, winners of Group N. Exterior detail faithful to the original and Scaleauto chassis designed for great stability on track.
View
Vista superior del tester de motores con pantalla digital y adaptadores universales.
Out-of-Stock
Herramientas

Universal motor tester with RPM reading.

Fabricante: Scaleauto
Ref: SC-5069A
€99.95
Real data before each race: the SC-5069A tester from Scaleauto measures revolutions per minute and current consumption in virtually any slot car motor, with adjustable voltage and universal adapters included.
View
Motor tester with RPM Scaleauto SC-5069B
Last items in stock
Herramientas

Motor tester with RPM reading. DELUX with all adapters.

Fabricante: Scaleauto
Ref: SC-5069B
€119.95
Scaleauto workshop tool for the professional running-in of slot motors. Real-time digital RPM reading, universal adapters included, and portable design: everything you need to get the most out of each motor before hitting the track.
Chasis Scaleauto SC-9100H para Ferrari 512S
Last items in stock
3D chassis, Fibre, Metal..

Scaleauto SC-9100H EVO3 chassis for Ferrari 512S and RT3 mounts

Fabricante: Scaleauto
Ref: SC-9100H
€7.92
The SC-9100H chassis from Scaleauto upgrades your Ferrari 512S to the EVO3 standard, with full compatibility for RT3 motor mounts. A technical foundation that transforms track performance and unleashes the full potential of the model.
Chasis Scaleauto SC-9100G Lola T70
Last items in stock
3D chassis, Fibre, Metal..

SC-9100G chassis for Lola T70 - EVO3 performance

Fabricante: Scaleauto
Ref: SC-9100G
€7.92
Transform your Fly Lola T70 into a competition machine with the SC-9100G chassis from Scaleauto. Designed to EVO3 standards and compatible with RT3 mounts, it allows for Sidewinder, Inline, and Anglewinder configurations for radically superior track performance compared to the original.
Pack Herramientas Slot PRO - Edición Especial Día del Padre
  • On sale!
  • -12%
  • Pack
Out-of-Stock
OFFERS

Slot PRO Tool Pack

Fabricante: Scaleauto
Ref: Packherramienta
€158.83 €180.49
Everything a serious slot car preparer needs gathered in a single pack: torque screwdrivers, universal press and extractor, competition lubricants, diamond files, pro reamer, and organisation boxes. Handpicked tools to ensure every adjustment on the bench counts.
View
Pack Pro-Performance Rally: Toyota Yaris Rally2 Monster + Chasis + repuestos
  • On sale!
  • -12%
  • Pack
Out-of-Stock
OFFERS

Pro-Performance Rally Pack: Toyota Yaris Rally2 Monster + Chassis + Spare Parts

Fabricante: Scaleauto
Ref: Packpro
€156.57 €177.92
Competition slot pack designed for the demanding driver: Toyota Yaris Rally2 Monster "Monte Carlo 2025" body from Avant Slot on a 3DP Extreme ASA chassis with Anglewinder mechanics, 21,000 rpm motor, 4x4 belt drive, and Urano EVO II wheels. All set to adjust, fine-tune, and win.
View
FLY EVO3 Ford GT40 Chassis RT3 Supports | SC-9100F
Last items in stock
3D chassis, Fibre, Metal..

FLY EVO3 chassis Ford GT40 for RT3 Motor Mounts

Fabricante: Scaleauto
Ref: SC-9100F
€7.92
High competition chassis Scaleauto EVO3 designed to replace the original base of the Ford GT40 from Fly and integrate the motor mounts RT3. Technical plastic with controlled flex, front axle adjustment and compatibility with inline, sidewinder or anglewinder configurations.
Body Screws 4mm Head 4.3mm M2 | Scaleauto
Last items in stock
bench-mounted

Screws for 4mm Bodies with 4.3mm Head. M2

Fabricante: Scaleauto
Ref: SC-5138
€4.00
Scaleauto M2 screws designed for body adjustment in competition slot cars. With a length of 4 mm and a head diameter of 4.3 mm, they allow for the controlled lateral play that the body needs to absorb inertia without snagging and without protruding from the chassis.
Chasis FLY EVO3 Porsche 917k para Soportes de Motor RT3
Last items in stock
3D chassis, Fibre, Metal..

FLY EVO3 chassis Porsche 917k for RT3 Motor Mounts

Fabricante: Scaleauto
Ref: SC-9100E
€7.92
High competition chassis series EVO3 from Scaleauto, designed for Porsche 917k bodies and compatible with RT3 motor mounts. It allows inline, sidewinder or anglewinder configurations, with adjustable tilting and front axle height for significantly improved cornering performance compared to the original chassis.
Correa MXL z50 2mm ancho - 1ud
Belts

MXL belt z57-2mm - 1 pc.

Fabricante: MITOOS
Ref: CXM457
€3.49
Mitoos MXL pitch timing belt, 57 teeth and 2 mm wide. Perfect fit with the entire range of Mitoos toothed pulleys —both plastic and aluminium— to transmit high revolutions without losing traction.
Correa MXL z50 2mm ancho - 1ud
Last items in stock
Belts

MXL belt z56-2mm - 1 pc.

Fabricante: MITOOS
Ref: CXM456
€3.49
Standardised MXL timing belt with 56 teeth and 2 mm width, compatible with the entire range of Mitoos toothed pulleys, both in plastic and aluminium. Lossless traction transmission at high revolutions, with guaranteed perfect fit.
Correa MXL z50 2mm ancho - 1ud
Belts

MXL belt z59-2mm - 1 unit.

Fabricante: MITOOS
Ref: CXM459
€3.49
MXL pitch timing belt with 59 teeth and 2 mm width, designed by Mitoos to fit precisely with its entire range of toothed pulleys, both plastic and aluminium. Clean transmission and no loss of traction even at high revolutions.
Correa MXL z50 2mm ancho - 1ud
Last items in stock
Belts

MXL belt z58-2mm - 1 pc.

Fabricante: MITOOS
Ref: CXM458
€3.49
MXL z58 toothed belt, 2 mm wide, for high-revolution transmission between shafts. Perfect fit with Mitoos toothed pulleys, both in plastic and aluminium versions, without loss of traction.
Vista de la correa Mitoos M455 con ancho de 2 mm.
Last items in stock
Belts

Mitoos MXL z55 timing belt

Fabricante: MITOOS
Ref: CXM455
€3.49
Mitoos MXL z55 toothed belt with 55 teeth and 2 mm width for pulley drive systems in 1/32 slot cars. Direct power transfer, strong braking, and quiet running without the stretch typical of traditional rubber bands.
LBH Supertrofeo Evo2 Medium Grey Chassis | SC-6686B
Plastic Chassis

LBH Supertrofeo Evo2 Medium Grey chassis

Fabricante: Scaleauto
Ref: SC-6686B
€7.92
The SC-6686B chassis from Scaleauto in medium hardness (grey) is designed to extract the maximum performance from the Lamborghini Huracán Super Trofeo Evo2 on track. It offers the right balance between controlled torsion and structural rigidity, facilitating constant traction and clean cornering on medium-high grip surfaces.
Mitsubishi Evo V Rally Monte Carlo 1999 Climent SC-6369R
Out-of-Stock
Modern Rally

Mitsubishi Evo V Rally Monte Carlo 1999 n28 Climent/Romani. R-Version AW

Fabricante: Scaleauto
Ref: SC-6369R
€87.92
The Mitsubishi Lancer Evo V that Luis Climent and Álex Romaní took to the class podium at Monte Carlo 1999 is now in 1/32 scale. This R-Version from Scaleauto combines an In-Flex R2.0 chassis, Anglewinder mechanics, and 4WD belt drive to deliver competitive performance from the very first metre.
View
Soporte motor 3D Sloting Plus SP610107 compatible con NSR OFFSET 1 mm.
Benches

3D motor mount compatible with NSR OFFSET 1.25 mm

Fabricante: Sloting Plus
Ref: SP610108
€6.72
Anglewinder chassis manufactured in 3D by Sloting Plus, compatible with the NSR standard and with an offset of 1.25 mm for the highest axle elevation available. It accommodates Monoblock bearings, ball bearings, and standard brass bushings, offering real versatility in the preparation of the rear end.
Soporte de motor 3D Sloting Plus compatible con NSR y offset 0,75 mm.
Last items in stock
Benches

3D motor mount compatible with NSR OFFSET 1 mm

Fabricante: Sloting Plus
Ref: SP610103
€6.72
Sloting Plus 3D anglewinder chassis compatible with the NSR standard and 1 mm offset. Lowers the car's centre of gravity, improves corner stability, and accommodates brass bearings and the COMBI PLUS system. A precision reference for competition preparation.
Soporte de motor 3D Sloting Plus compatible con NSR y offset 0,75 mm.
Last items in stock
Benches

3D motor mount compatible with NSR OFFSET 0.75 mm

Fabricante: Sloting Plus
Ref: SP610102
€6.72
3D printed anglewinder chassis, compatible with the NSR standard and with a 0.75 mm offset that raises the rear axle relative to the motor, lowering the centre of gravity. It accepts standard brass bearings and the COMBI PLUS system from Sloting Plus for perfect axle alignment.
Showing 25-48 of 1395 item(s)
Home
  • OFFERS
  • DIECAST
    • Scale 1/8
    • Scale 1/64
  • Slot Cars
    • Modern Rally
    • Classic Rally
    • Endurance Classic
    • Le Mans 80's - 90's
    • Modern Le Mans
    • Modern GT
    • F1
    • Turismos, Deportivos y Cine
    • Raid
    • Resins and Collectors
    • 1/24 cars
    • 1/43 cars
  • 1/32 spare parts
    • Shock absorbers
      • For bench
      • For axle
    • Benches
      • In Line
      • Anglewinder
      • Sidewinder
    • Bodies
      • Body shell
      • Lexan Interior
      • Glass parts
      • Body parts
    • Chassis
      • Plastic Chassis
      • 3D chassis, Fibre, Metal..
      • Accessories
    • Bearings, stoppers and spacers
      • Bearings
      • Bearings
      • Spacers
      • Stoppers
    • Coronas
      • Coronas en linea
      • Coronas anglewinder
      • Cross crowns
    • Guides, wire and braids
      • Guide
      • Springs
      • Braids
      • Spacers
      • Terminals
      • Cable
    • Axles
      • Steel
      • Carbon
      • Titanium
      • Holes
      • Specials
    • Wheels
      • 3D
      • Plastic
      • Aluminium
      • Magnesium
      • Wheel covers
    • Motors
      • Long box
      • Short box
    • Tyres
      • Fronts
      • Rear
      • Rally and Raid
      • Formula 1
      • Classics
      • Truck
      • Others
    • Pinions
      • Nylon
      • Bronze
      • Steel
      • Ergal
    • Screws
      • For chassis
      • Allen and Torx screw
      • of Bodywork
      • Nuts and washers
      • of Dampers
      • guide
      • of motor
      • bench-mounted
    • Transmission
      • Pulleys
      • Belts
  • 1/24 Spare Parts
    • Transmission
    • Axles and bearings
    • Guides and wires
    • Screws and nuts
    • 1/24 bodies
    • 1/24 chassis
    • Wheels and tyres
  • Workshop
    • Lubricants
    • Herramientas
    • Storage
    • Tyre additives
    • Enhancing cleaner
    • Cleaning products
  • Electronics
    • Controllers and power supplies
    • Lights and LEDs
    • Lap counter
    • Circuits
  • Decoration
    • Acrylic paints
    • Diorama
    • Accessories
    • Spray Paint
    • Calcas
    • Airbrushes
  • Radio Control
    • RC Cars Spare Parts
      • Traxxas
      • Tyres and wheels
        • 1/10 Touring Wheels
        • 1/10 Drift
        • 1/8TT
        • TRUGGY - MONSTER
      • Bodies
      • Accessories
      • Team Losi
        • MINI 8IGHT
      • Tamiya
        • TT01
        • TT02
        • Series M
        • F104
      • Sakura D3
      • ECX
    • RC Accessories
      • Transport cases
      • Electronics
        • Transmitters
        • Switches, connectors and cables
        • Battery chargers
      • Batteries
        • Lipo
      • Fuels
      • RC motors
        • Electric
        • Combustion
        • Electric Car Combos
        • Variators
        • Motor accessories
      • Oils, silicones and greases
        • Oils and grease
        • Silicones
    • RC Tools
      • General
      • Accessories
      • Drills and cutting discs
      • Adhesives
      • Set Up
Product added to wishlist

Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Para dar su consentimiento sobre su uso pulse el botón Acepto.

Contáctanos por Whatsapp