Silicone 3000CPS

A silicone with a viscosity of 3000CPS designed for those who leave nothing to chance in the preparation of their slot car

In the world of slot racing, the difference between a car that runs smoothly and one that loses tenths due to avoidable friction often lies in the lubricant you use and how you apply it. The Silicone 3000CPS (reference MP010-3000) falls into that category of preparation products that every serious enthusiast eventually incorporates into their toolbox.

Main features

• Viscosity 3000CPS: a medium-high viscosity that allows you to apply the silicone exactly where needed, without excessive spreading or escaping from the application area.
• Silicone base: inert to plastics, rubbers, and metals commonly used in slot car construction, ensuring that its use does not compromise the integrity of the components.
• Durable lubrication: unlike lighter lubricants, its greater body allows the protective film to last through more races before needing reapplication.
• Controlled application: the product's own density makes it easy to dose precisely, especially in small areas like bearings, axles, or chassis friction points.

Recommended applications

The viscosity of 3000CPS makes it a suitable choice for:

• Lubrication of ball or plastic bearings on the front and rear axles.
• Friction points of the chassis with the body or with moving elements.
• Articulation areas where a lubricant that stays in place under track vibrations is needed.
• Preparation of gears when looking for a lubricant with more body than lightweight low-viscosity silicones.

Behaviour and performance

Compared to lower viscosity silicones (for example, 100 or 350 CPS), the 3000CPS moves less easily once applied, which is an advantage in parts that are not frequently disassembled or in areas where the lubricant would tend to migrate onto the track or braids. For high-precision bearings that require minimal resistance, it can be combined with lower viscosity silicones according to the preparer's preferences.

Assembly and preparation

Always apply sparingly: a well-placed drop is sufficient at most points. Clean any excess before reassembling the car to prevent the silicone from reaching the braids or the track, which could reduce electrical conductivity. If using a syringe or fine-tip applicator, the consistency of 3000CPS is perfectly suited to that dosing method.

Frequently asked questions

How does silicone 3000CPS differ from other lower viscosities?

The higher the viscosity number (CPS), the thicker the silicone. A 3000CPS has more body than a 100 or 350CPS, meaning it moves less, stays longer in the application area, and does not migrate easily. It is the usual choice for bearings or friction areas where you want to prevent the lubricant from "escaping".

Is it compatible with the plastics and rubbers of slot cars?

Silicones are generally inert with the materials commonly used in slot racing (ABS, nylon, braid rubbers, etc.). However, it is always advisable to apply it in small amounts and avoid direct contact with the braids to not compromise electrical conductivity.

Can I also use it on tyres to improve grip?

No. Silicone is incompatible with tyre treatments designed to improve grip; in fact, it may reduce it. There are specific products for tyres. This silicone is exclusively aimed at lubricating mechanical parts.

How often should I reapply it?

It depends on the use of the car and the type of bearing. In ball bearings with intensive club use, a check every few sessions is sufficient. In recreational cars, it can last many hours on the track without needing reapplication due to the persistence offered by its viscosity.

Is any special tool needed for application?

Not essential, but recommended. A fine-tipped syringe or applicator allows you to deposit the exact amount in the right spot without the risk of excess. A toothpick or similar can also be used for controlled application.

The Silicone 3000CPS (ref. MP010-3000) is a high-viscosity silicone lubricant designed for slot car preparation and maintenance. With its 3000CPS rating, it stays precisely where applied, making it ideal for lubricating bearings, axles and chassis friction points without migrating onto the track or braids. Compatible with plastics, metals and rubber components common in slot car construction, it delivers long-lasting lubrication and precise dosage — a reliable tool for club racers and serious hobbyists looking to reduce mechanical friction and improve consistency lap after lap.

Information not found

No specific data about the manufacturer or the original brand of this product (MP010-3000) or about the presentation format (volume, type of container or dosing system included) could be verified. If you have this information, we recommend completing the sheet with those details to provide the buyer with a more comprehensive reference.