Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Wheel covers

Complete painted wheel cover -Le Mans-

Fabricante: Sloting Plus

Ref: SP029901

€2.53

Complete painted wheel covers with Le Mans design from Sloting Plus: the finishing touch that transforms the appearance of your wheels and brings your slot car closer to the detail of real competition prototypes.

Aluminium

4 classic 32-spoke wheels

Fabricante: MITOOS

Ref: CXM240

€4.51

Set of 4 classic 32-spoke wheels in chrome ABS for 1/32 slot cars, with pressure fit for axles of Ø 2.38–2.40 mm and includes 2 sets of clips. Compatible with Mitoos classic tyres M070–M079.

Out-of-Stock

Braids

Dispenser + 1m copper silver braid

Fabricante: MITOOS

Ref: CXM173

€3.95

One metre of copper braid coated with tin-silver, harder and more durable than bare copper but equally conductive, flexible, and slippery. Includes Mitoos dispenser for extracting the right amount and keeping the rest in perfect condition.

View

Out-of-Stock

Braids

Dispenser + 1m red copper braid

Fabricante: MITOOS

Ref: CXM171

€3.95

Practical dispenser with 1 metre of high conductivity red copper braid. The side opening makes it easy to cut exactly what you need, and the dispenser is reusable: when the braid runs out, you can reload it.

View

3D chassis, Fibre, Metal..

75mm Raid 4x4 ballast subchassis

Fabricante: MITOOS

Ref: CXM908

€5.49

Counterweight of 12.9 g designed for the Mitoos Raid Panda chassis (M907). It is placed on the flat bottom of the chassis and includes mounting screws and an insulating sticker to prevent contact with the track. A simple adjustment that makes a difference in the car's handling.

Coronas en linea

Crown gear z31 line for z8 M2.5

Fabricante: MITOOS

Ref: CXM234

€4.03

Mitoos transmission set consisting of an inline crown gear with 31 teeth, an 8z pinion, and a 1.3 mm Allen key. Made of white nylon with an aluminium insert and secured by an M2.5 mm screw, it is exclusively compatible with 8z pinions.

Coronas en linea

Crown gear z29 line for z8 M2.5

Fabricante: MITOOS

Ref: CXM233

€4.03

Mitoos CXM233 three-piece set: 29-tooth crown gear in white nylon for inline configuration, 8-tooth pinion, and 1.3 mm Allen key. Attachment to the axle via M2.5 screw with aluminium insert. Compatible exclusively with 8z pinions.

Out-of-Stock

Herramientas

Torx T6 steel tip

Fabricante: MITOOS

Ref: CXM131P

€3.22

Replacement Torx T6 tip made of hardened and nitrided steel by MITOOS. Compatible with the aluminium handle screwdrivers M128, M129, and M131. The solution to keep your tools always ready in the workshop.

View

Out-of-Stock

Herramientas

Aluminium handle Pro Torx T6

Fabricante: MITOOS

Ref: CXM131

€6.69

Mitoos precision tool with ergonomic machined aluminium handle anodised in black. Adjustable and replaceable Torx T6 tip, hollow interior for storing extra tips and includes a 2 mm Allen key. Specifically designed for the screws of RAID chassis and other Mitoos parts with Torx T6 screws.

View

Herramientas

Hex Tip 1.3 mm

Fabricante: MITOOS

Ref: CXM129P

€3.22

1.3 mm hexagonal (Allen) tip from MITOOS, compatible with the brand's Pro aluminium handle. A specific and reliable replacement to keep your toolset always ready.

Herramientas

Hex Tip 0.9 mm

Fabricante: MITOOS

Ref: CXM128P

€3.40

0.9 mm hexagonal (allen) tip from MITOOS, specifically designed for the Pro aluminium handle. A small but crucial accessory when you need a precise and secure adjustment in the preparation workshop.

Stoppers

M2.5 Stopper Pin 10 pcs

Fabricante: MITOOS

Ref: CXM115

€11.28

Ten Mitoos aluminium stopper prisoners (ref. CXM115) for 3/32" (2.38 mm) axles. Screw tightening M2.5, outer diameter 6 mm and width 3 mm. Each unit includes its DIN 913 M2.5×3 screw for a clean and secure assembly.

Herramientas

1.30 MM ALLEN TIP 2.5 AND 0.50" (NSR)

Fabricante: Sloting Plus

Ref: SP141020

€3.70

1.30 mm tip made of tempered stainless steel, compatible with M2.5 studs and 0.50" screws from NSR. Hexagon of 1.3 mm and shaft diameter of 2.3 mm. Supplied in a bag with 1 unit.

For bench

LIMITER KIT - SUSPENSION STOPS

Fabricante: Sloting Plus

Ref: SP116001

€4.40

Aluminium suspension limiters from Sloting Plus (ref. SP116001) for M2 screw, available in three heights: 1.5, 2, and 2.5 mm. The pack includes 4 units of each size, allowing for precise adjustment of the bracket travel and enabling combinations to suit any spring length.

COJINETE DE BOLAS 1 LABIO EJE 2,36MM (NSR)

Bearings

BALL BEARING 1 LIP AXLE 2.36MM (NSR)

Fabricante: Sloting Plus

Ref: SP055001

€6.72

Steel ball bearing with a lip for a 2.36 mm axle, compatible with NSR and Thunderslot. Designed for metal, fibre or plastic chassis, with a 4.75 mm anchor hole. Sold in a pack of 2 units.

Out-of-Stock

Controllers and power supplies

MB CONTROLLER CASE

Fabricante: Sloting Plus

Ref: MB-20011

€12.79

Replacement casing for MB controller, reference MB-20011. A key component to renew or repair the housing of your controller and keep it in perfect condition for track use.

View

Herramientas

0.90mm hexagonal tip M2

Fabricante: Sloting Plus

Ref: SP141019

€3.70

M2 hexagonal tip of 0.90 mm from Sloting Plus, designed for precise work with screws in the preparation and setup of slot cars. Direct compatibility with reference SP141019.

Out-of-Stock

Controllers and power supplies

PARMA controller casing

Fabricante: Sloting Plus

Ref: SP138902

€9.60

Replacement casing for PARMA controller from Sloting Plus, ready to assemble. Includes the complete fixing kit: 2 screws M3 x 22 mm, 1 screw M3 x 20 mm, and 3 nuts M3, all in stainless steel.

View

Plastic

Universal nylon wheel 16.2x8mm

Fabricante: Sloting Plus

Ref: SP020904

€8.00

Set of 2 universal wheels Sloting Plus (ref. SP020904) made from high-strength technical nylon. With dimensions of 16.2 x 8 mm and secured by M2.5 set screw, they are the lightest and most reliable option for the front axle in competition or to lighten any standard model.

Tornillo especial DUAL-2 M8 para prensa UNIVERSAL -UPSILON-

Herramientas

Special DUAL M8 screw for press

Fabricante: Sloting Plus

Ref: SP140025

€5.60

Special DUAL M8 screw from Sloting Plus made of A303 stainless steel, designed for use with the UNIVERSAL pinion extractor and the UNIVERSAL SINGLE pinion extractor. Its conical shape automatically centres and aligns the motor shaft, protecting both the shaft and the pinion during operation. 1 unit. Weight: 6 g.

Herramientas

Special screw DUAL-2 M8 for UNIVERSAL press -UPSILON-

Fabricante: Sloting Plus

Ref: SP140026

€5.60

Key part to protect the motor and axle when pressing pinions with the UNIVERSAL UPSILON press: its self-centering conical shape prevents axle bending. Made of A303 stainless steel by Sloting Plus, with a 10-year guarantee against breakage. 1 unit per bag.

Trencilla de cobre CB RACE 0,35 con dispensador

Braids

CB RACE 0.35 copper braid with dispenser

Fabricante: Sloting Plus

Ref: SP104138

€8.80

CB Race copper braid from Sloting Plus with a thickness of 0.35 mm and approximately 3.4 mm in width. Supplied in a bag with a length of 2 m and includes a dispenser for easy, clean, and tangle-free handling.

Trencilla de cobre CB RACE 0,25 con dispensador

Braids

CB RACE 0.25 copper braid with dispenser

Fabricante: Sloting Plus

Ref: SP104137

€8.80

CB RACE copper braid from Sloting Plus with a thickness of 0.25 mm and a width of 3.4 mm. It includes 2 metres in length and a practical dispenser to keep it tidy and ready for use at any time.

Trencilla estañada STANDARD FLAT 0,35 con dispensador

Braids

Standard Flat 0.35 Tinned Braid with Dispenser

Fabricante: Sloting Plus

Ref: SP103151

€8.80

Flat tinned copper braid of 0.35 mm thickness and approximately 3.4 mm width, presented in a bag with 2 metres in length and includes a practical dispenser to keep it always organised and ready to use.

Showing 97-120 of 656 item(s)