Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Coronas en linea

Crown gear z31 line for z8 M2.5

Fabricante: MITOOS

Ref: CXM234

€4.03

Mitoos transmission set consisting of an inline crown gear with 31 teeth, an 8z pinion, and a 1.3 mm Allen key. Made of white nylon with an aluminium insert and secured by an M2.5 mm screw, it is exclusively compatible with 8z pinions.

Coronas en linea

Crown gear z29 line for z8 M2.5

Fabricante: MITOOS

Ref: CXM233

€4.03

Mitoos CXM233 three-piece set: 29-tooth crown gear in white nylon for inline configuration, 8-tooth pinion, and 1.3 mm Allen key. Attachment to the axle via M2.5 screw with aluminium insert. Compatible exclusively with 8z pinions.

Herramientas

Hex Tip 1.3 mm

Fabricante: MITOOS

Ref: CXM129P

€3.22

1.3 mm hexagonal (Allen) tip from MITOOS, compatible with the brand's Pro aluminium handle. A specific and reliable replacement to keep your toolset always ready.

Herramientas

Hex Tip 0.9 mm

Fabricante: MITOOS

Ref: CXM128P

€3.40

0.9 mm hexagonal (allen) tip from MITOOS, specifically designed for the Pro aluminium handle. A small but crucial accessory when you need a precise and secure adjustment in the preparation workshop.

Stoppers

M2.5 Stopper Pin 10 pcs

Fabricante: MITOOS

Ref: CXM115

€11.28

Ten Mitoos aluminium stopper prisoners (ref. CXM115) for 3/32" (2.38 mm) axles. Screw tightening M2.5, outer diameter 6 mm and width 3 mm. Each unit includes its DIN 913 M2.5×3 screw for a clean and secure assembly.

Herramientas

1.30 MM ALLEN TIP 2.5 AND 0.50" (NSR)

Fabricante: Sloting Plus

Ref: SP141020

€3.70

1.30 mm tip made of tempered stainless steel, compatible with M2.5 studs and 0.50" screws from NSR. Hexagon of 1.3 mm and shaft diameter of 2.3 mm. Supplied in a bag with 1 unit.

For bench

LIMITER KIT - SUSPENSION STOPS

Fabricante: Sloting Plus

Ref: SP116001

€4.40

Aluminium suspension limiters from Sloting Plus (ref. SP116001) for M2 screw, available in three heights: 1.5, 2, and 2.5 mm. The pack includes 4 units of each size, allowing for precise adjustment of the bracket travel and enabling combinations to suit any spring length.

COJINETE DE BOLAS 1 LABIO EJE 2,36MM (NSR)

Bearings

BALL BEARING 1 LIP AXLE 2.36MM (NSR)

Fabricante: Sloting Plus

Ref: SP055001

€6.72

Steel ball bearing with a lip for a 2.36 mm axle, compatible with NSR and Thunderslot. Designed for metal, fibre or plastic chassis, with a 4.75 mm anchor hole. Sold in a pack of 2 units.

Herramientas

0.90mm hexagonal tip M2

Fabricante: Sloting Plus

Ref: SP141019

€3.70

M2 hexagonal tip of 0.90 mm from Sloting Plus, designed for precise work with screws in the preparation and setup of slot cars. Direct compatibility with reference SP141019.

Plastic

Universal nylon wheel 16.2x8mm

Fabricante: Sloting Plus

Ref: SP020904

€8.00

Set of 2 universal wheels Sloting Plus (ref. SP020904) made from high-strength technical nylon. With dimensions of 16.2 x 8 mm and secured by M2.5 set screw, they are the lightest and most reliable option for the front axle in competition or to lighten any standard model.

Tornillo especial DUAL-2 M8 para prensa UNIVERSAL -UPSILON-

Herramientas

Special DUAL M8 screw for press

Fabricante: Sloting Plus

Ref: SP140025

€5.60

Special DUAL M8 screw from Sloting Plus made of A303 stainless steel, designed for use with the UNIVERSAL pinion extractor and the UNIVERSAL SINGLE pinion extractor. Its conical shape automatically centres and aligns the motor shaft, protecting both the shaft and the pinion during operation. 1 unit. Weight: 6 g.

Herramientas

Special screw DUAL-2 M8 for UNIVERSAL press -UPSILON-

Fabricante: Sloting Plus

Ref: SP140026

€5.60

Key part to protect the motor and axle when pressing pinions with the UNIVERSAL UPSILON press: its self-centering conical shape prevents axle bending. Made of A303 stainless steel by Sloting Plus, with a 10-year guarantee against breakage. 1 unit per bag.

Trencilla de cobre CB RACE 0,35 con dispensador

Braids

CB RACE 0.35 copper braid with dispenser

Fabricante: Sloting Plus

Ref: SP104138

€8.80

CB Race copper braid from Sloting Plus with a thickness of 0.35 mm and approximately 3.4 mm in width. Supplied in a bag with a length of 2 m and includes a dispenser for easy, clean, and tangle-free handling.

Trencilla de cobre CB RACE 0,25 con dispensador

Braids

CB RACE 0.25 copper braid with dispenser

Fabricante: Sloting Plus

Ref: SP104137

€8.80

CB RACE copper braid from Sloting Plus with a thickness of 0.25 mm and a width of 3.4 mm. It includes 2 metres in length and a practical dispenser to keep it tidy and ready for use at any time.

Trencilla estañada STANDARD FLAT 0,35 con dispensador

Braids

Standard Flat 0.35 Tinned Braid with Dispenser

Fabricante: Sloting Plus

Ref: SP103151

€8.80

Flat tinned copper braid of 0.35 mm thickness and approximately 3.4 mm width, presented in a bag with 2 metres in length and includes a practical dispenser to keep it always organised and ready to use.

Trencilla estañada STANDARD 0,25 cortada

Braids

Standard Flat 0.25 Tinned Braid with Dispenser

Fabricante: Sloting Plus

Ref: SP103150

€8.80

Standard Flat tinned copper braid from Sloting Plus: 0.25 mm thick and approx. 3.4 mm wide, in a 2 m bag with an integrated dispenser to keep the material always ready and perfectly organised.

Polea UNIVERSAL Ø6,5 eje 2,38 mm. ORO Slotingplus

Pulleys

UNIVERSAL pulley 6.5mm shaft 2.38mm. GOLD

Fabricante: Sloting Plus

Ref: SP079930

€6.75

Universal pulley made of duraluminium with a conical inner profile that accepts belts of 1 and 1.5 mm, tolerates misalignments between shafts and improves traction. Shaft of 2.38 mm, GOLD finish. Bag with 2 units and includes M2 x 2 mm allen screw.

Rodamiento de bolas eje de 2,38 mm. (3/32'')

Bearings

Ball bearing shaft of 2.38 mm (3/32'') -ABEC

Fabricante: Sloting Plus

Ref: SP055002

€9.28

ABEC 5 steel ball bearing, one lip, for 2.38 mm (3/32'') axle. Anchor hole of 4.75 mm, only 0.2 g per unit. Bag with 2 high-quality units, designed for those who demand more performance and durability in their setups.

Bearings

COMBI PLUS MONOBLOCK 32.5 RT4

Fabricante: Sloting Plus

Ref: SP053105

€6.15

The Sloting Plus Combi Plus Monoblock 32.5 RT4 is a brass component for a 2.38 mm axle, specifically designed for the SC RT4 angular bracket (green). Lightweight, precise, and ready to adjust your traction geometry with complete reliability. Bag with 1 unit.

Bearings

COMBI PLUS MONOBLOCK 30 RT3

Fabricante: Sloting Plus

Ref: SP053104

€6.15

30 mm brass monoblock designed for a 2.38 mm (3/32") axle and compatible with the SC RT3 angular bracket (red). Manufactured by Sloting Plus, it comes in a pack of 1 unit ready to install with the precise fit required for competition.

Bearings

COMBI PLUS MONOBLOCK 29 Slotit

Fabricante: Sloting Plus

Ref: SP053103

€6.15

The Combi Plus Monoblock 29 from Sloting Plus combines crown gear and axle support in a single piece of brass for a 2.38 mm (3/32") axle. Compatible with the Slot.it angular bracket at any offset height. A lightweight, rigid set designed to optimise the transmission to the maximum.

Muelle universal conico para guia - soft

Springs

UNIVERSAL conical spring for guide (EXTRA SOFT)

Fabricante: Sloting Plus

Ref: SP117092

€3.70

Exclusive conical design from Sloting Plus that, when compressed, reaches only 0.35 mm in thickness. No need for cutting, with perfect parallelism at the ends and impeccable return of the guide. The ultimate solution for those seeking precision in setup.

Bearings

2.38 mm (3/32'') ball bearing axle.

Fabricante: Sloting Plus

Ref: SP055000

€6.72

Steel ball bearing with a lip for a 2.38mm (3/32'') axle, with a standard mounting diameter of 4.75mm. Compatible with metal and fibre chassis. Sold in a pack of 2 units.

Aluminium

Wheel 19.3 x 10 mm. -TOUAREG-

Fabricante: Sloting Plus

Ref: SP027003

€10.95

The Touareg wheel from Sloting Plus is the brand's response for RAID and truck categories: 19.3 x 10 mm, weighing just 2.5 g and designed for the most demanding conditions. Compatible with hub cap for added realism.

Showing 97-120 of 595 item(s)