Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Ford RS200 White Racing Kit - Anglewinder In-Flex 2.0 Chassis.
  • New
Last items in stock
Modern Rally

Ford RS200 White Racing Kit - Anglewinder In-Flex 2.0 Chassis.

Fabricante: Scaleauto
Ref: SC-6455
€60.72
Assembly kit of the Ford RS200 in White Racing version from Scaleauto, with In-Flex 2.0 chassis in anglewinder configuration. A proposal designed for the enthusiast who wants to bring the iconic rally car to the track with complete freedom of customization and preparation.
Aluminium Wheels 15.8x11mm Axle 3/32 Scaleauto SC-4090F25
  • New
Last items in stock
Aluminium

Lightweight Aluminium Wheels 15.8x11mm for 3/32 Axles

Fabricante: Scaleauto
Ref: SC-4090F25
€6.72
Two CNC machined aluminium wheels for 2.38 mm (3/32") axles, with dimensions of 15.8x11 mm and secured with an M2.5 screw. Designed to reduce rotational mass in your slot car's drivetrain and gain real agility in acceleration, braking, and cornering.
Scaleauto Skoda Fabia Rally2 Delecour MC 2023 1/32
  • New
Last items in stock
Modern Rally

Skoda Fabia Rally2 Rally Monte Carlo 2023 n37 - F. Delecour - R Version

Fabricante: Scaleauto
Ref: SC-6446R
€87.92
The Skoda Fabia Rally2 that François Delecour drove in the 2023 Monte Carlo Rally, reproduced at 1/32 scale in R (Ready to Race) version. Soft grey chassis R2.0 in-flex, SC-0027 motor at 18,000 rpm, RT3 bracket with −0.5 mm offset, 8/31 tooth transmission, calibrated tempered steel axles, and RT compound tyres. A piece for both competition and collection...
Scaleauto Skoda Fabia R5 Gulf Montecarlo 2020 #43 1/32
  • New
Last items in stock
Modern Rally

Skoda Fabia R5 Rally Monte Carlo 2020 n43 Gulf - A. Gino - R Version

Fabricante: Scaleauto
Ref: SC-6443R
€87.92
1/32 scale reproduction of the Skoda Fabia R5 driven by Alessandro Gino in the 2020 Monte Carlo Rally, dressed in the unmistakable Gulf livery. R competition version with in-flex R2.0 chassis, SC-0027 motor at 18,000 rpm, offset RT3 mount, and rear aluminium wheels with high-grip RT tyres.
Magnesium

URANO EVO II wheel 15.9 x 10 (2pcs)

Fabricante: Sloting Plus
Ref: SP022512
€12.75
Direct technical evolution of the legendary MERKURO: the Urano EVO II wheel from Sloting Plus combines ultra-light magnesium (0.95 gr/unit), interior flank perforation, and M2.5 Allen fixation for almost perfect balance in slot racing competition. Sold in a pack of 2 units.
3DP Chassis Alpine A424 Hypercar RT4 Bench | Scaleauto
Last items in stock
3D chassis, Fibre, Metal..

3DP chassis Alpine A424 Hypercar for RT4 bench

Fabricante: Scaleauto
Ref: SC-9123B22
€14.32
Chassis manufactured using 3D printing by Scaleauto, specifically designed for the Alpine A424 Hypercar. Compatible with RT4 mounts in Anglewinder configuration, it combines lightweight structure and controlled stiffness to maximise track performance.
LMBH Supertrofeo Evo2 Hard Black Chassis SC-6686A
Last items in stock
Plastic Chassis

LMBH Supertrofeo Evo2 Hard Chassis - Black

Fabricante: Scaleauto
Ref: SC-6686A
€7.95
Hard composite plastic chassis from Scaleauto for the LMBH Supertrofeo Evo2 models. Designed to provide structural rigidity and flat cornering on tracks with a high level of grip, whether wooden or plastic. The reference SC-6686A for those seeking predictable performance in competition.
Lamborghini Huracan Supertrofeo Evo2 Cup Version - V - Version R
Out-of-Stock
Modern GT

Lamborghini Huracan Supertrofeo Evo2 Cup Version - V - Version R

Fabricante: Scaleauto
Ref: SC-6427A
€79.90
The Lamborghini Huracán Supertrofeo Evo2 in Cup version from Scaleauto arrives in green livery with R 2.0 In-flex Soft chassis, SC-0011c motor at 20,000 rpm on Anglewinder RT3 mount with -1 mm offset and advanced screw guide. A real competition piece for the GT Modern category at 1/32 scale.
Lamborghini Huracan  Supertrofeo Evo2 Cup Version - Naranja - Version R
Last items in stock
Modern GT

Lamborghini Huracan Supertrofeo Evo2 Cup Version - Orange - Version R

Fabricante: Scaleauto
Ref: SC-6427B
€79.90
The Scaleauto SC-6427B brings to the track the Lamborghini Huracán Supertrofeo Evo2 Cup in vibrant orange. R2.0 In-flex Soft chassis assembled, SC-0011c motor at 20,000 rpm on Anglewinder RT3 Offset -1 mm mount and Advance guide with screw: competition ready to run from the very first moment.
Lamborghini Huracan Supertrofeo Evo2 Cup Version - Amarillo - Version R
Last items in stock
Modern GT

Lamborghini Huracan Supertrofeo Evo2 Cup Version - Yellow - Version R

Fabricante: Scaleauto
Ref: SC-6427C
€79.90
The Lamborghini Huracán Supertrofeo Evo2 in Copa yellow arrives in 1/32 scale with all the competition mechanics from Scaleauto: R2.0 In-flex Soft chassis, SC-0011c motor at 20,000 rpm in Anglewinder position with RT3 offset -1 mm bracket, Advance guide, and aluminium rear wheels. A machine ready to race fast.
Scaleauto SC-6427D Lamborghini Huracán Supertrofeo Evo2 White
Out-of-Stock
Modern GT

Lamborghini Huracan Supertrofeo Evo2 Cup Version - White - Version R

Fabricante: Scaleauto
Ref: SC-6427D
€79.90
The blank Cup version of the Scaleauto Lamborghini Huracán Supertrofeo Evo2 comes with all the racing equipment ready to run: R2.0 In-flex Soft chassis, SC-0011c motor at 20,000 rpm in Anglewinder RT3 configuration, and immaculate bodywork, perfect for customisation or collection.
3D chassis, Fibre, Metal..

Scaleauto A424 Hypercar V.3 3DP chassis for RT3 Motor Mount

Fabricante: Scaleauto
Ref: SC-9124B07
€14.30
Third evolution of the 3D printed (SLS) chassis from Scaleauto for the Alpine A424 Hypercar. Specifically designed for the RT3 motor mount, it improves weight distribution and torsion compared to previous versions, offering a more precise and stable performance on track.
Chasis 3DP Scaleauto LMB SC-63 Hypercar V.3 para Soporte Motor RT3
Out-of-Stock
3D chassis, Fibre, Metal..

Scaleauto LMB SC-63 Hypercar V.3 3DP chassis for RT3 Motor Mount

Fabricante: Scaleauto
Ref: SC-9124B06
€14.30
Third evolution of the SLS printed chassis for the Scaleauto Lamborghini SC-63. Specifically designed for the RT3 motor mount, it improves mass distribution and mechanical grip so that every track session makes a difference.
3D chassis, Fibre, Metal..

3DP Chassis LMB SC-63 Hypercar Scaleauto for RT4 Motor Mount

Fabricante: Scaleauto
Ref: SC-9123B21
€14.32
Chassis made of SLS polyamide through 3D printing, designed by Scaleauto for the Lamborghini SC-63 LMDh body. It accommodates the RT4 motor mount, allows height adjustment of the front axle with M2 screws, and features the guide in a forward position to enhance track stability.
Detalle del macho de roscar M3 Scaleauto SC-5092C en acero HSS.
Last items in stock
Herramientas

M3 Tapping Tap HSS Steel Scaleauto

Fabricante: Scaleauto
Ref: SC-5092C
€3.36
M3 metric tap made from high-speed steel (HSS), designed to create and repair threads with precision on chassis, mounts, and 3D printed parts. A reference tool in the slot racing and technical modelling workshop.
Lexan Interior

Scaleauto LB SC63 Hypercar Lexan Interior

Fabricante: Scaleauto
Ref: SC-6689
€4.00
Thermoformed Lexan cockpit specifically designed for the Scaleauto Lamborghini SC63 Hypercar. It reduces weight on the upper body, lowering the centre of gravity and gaining cornering stability without sacrificing the aesthetics of the LMDh prototype.
Cuna motor AW offset -1.00mm extra dura
In Stock
Anglewinder

AW RT3 Evo Offset Motor Mount -1.00mm extra hard (black)

Fabricante: Scaleauto
Ref: SC-6543
€9.52
Anglewinder motor cradle of the RT3 Evo system from Scaleauto with an offset of -1.00 mm and extra hard compound identified in black. Lowers the centre of gravity, eliminates torsions under strong acceleration, and transmits all the power to the crown gear with unalterable geometric precision.
Lexan Interior

Lexan interior for A-424 LM Hypercar

Fabricante: Scaleauto
Ref: SC-6693
€4.00
Thermoformed Lexan cockpit specifically designed for the Scaleauto A-424 LM Hypercar. Reduces weight on the top of the chassis, lowering the centre of gravity and gaining stability in corners without sacrificing the aesthetics of the LMH prototype.
Magnesium

Wheel 16.7 x 10 mm Urano Evo II Magnesium

Fabricante: Sloting Plus
Ref: SP022522
€12.72
Direct evolution of the Urano wheels, the Evo II in magnesium features the sidewall lightening inherited from the Merkuro line in a more refined design. Weighing just 1.07 grams and equipped with an M2.5 x 2.5 mm Allen screw for nearly ideal balance, they are a reference for drivers who push every hundredth on track.
Lamborghini SC63 Hypercar White Racing Kit
Out-of-Stock
Modern Le Mans

Lamborghini SC63 Hypercar White Racing Kit

Fabricante: Scaleauto
Ref: SC-6382
€67.95
1/32 scale construction kit of the Lamborghini SC63, the brand's first LMDh prototype. White body ready for painting, Pro In-flex RT4 chassis in Anglewinder configuration, SC-0029 motor with 22,500 rpm and high-level competition components. A serious platform for those seeking the maximum on track and in the paint shop.
Alpine A-424 LM Hypercar White Racing Kit
Last items in stock
Modern Le Mans

Alpine A-424 LM Hypercar White Racing Kit

Fabricante: Scaleauto
Ref: SC-6417
€67.95
Complete slot kit of the Alpine A-424 Hypercar in White Racing version, with Pro In-flex RT4 chassis mounted, 22,500 rpm motor, aluminium wheels and RT tyres. The ideal platform for those who want to build, decorate and compete with one of the most spectacular LMDh in the field.
Porsche 911 RSR 3.0 Jagermeister Nurburgring 1975 n54 - R Version
Last items in stock
Slot Cars

Porsche 911 RSR 3.0 Jagermeister Nurburgring 1975 n54 - R Version

Fabricante: Scaleauto
Ref: SC-6122R
€79.95
1/32 replica of the Porsche 911 RSR 3.0 Jägermeister that raced at the Nürburgring in 1975 with the number #54. The R version from Scaleauto features the SC-0011 motor with 20,000 rpm, anglewinder mounting, bronze ball bearings, and advanced guide SC-1608 for true competition performance.
Scaleauto M-Hybrid GTP Watkins Glen 2023 No.25 RT4
Last items in stock
Modern Le Mans

M-Hybrid GTP Watkins Glen 2023 No. 25 - Pro Anglewinder RT4

Fabricante: Scaleauto
Ref: SC-6384
€89.52
1/32 replica of the BMW M-Hybrid GTP No. 25 that competed in the 6 Hours of Watkins Glen 2023, in the Pro range of Scaleauto. In-Flex RT4 chassis, SC-0029 motor with 22,500 rpm and Anglewinder configuration for competition performance from the first lane.
Aluminium Plate Height Measurement SC-5067 Scaleauto
Out-of-Stock
Herramientas

Machined Aluminium Plate for Height Measurement

Fabricante: Scaleauto
Ref: SC-5067
€29.95
Precision tool made from CNC machined aluminium by Scaleauto to check and adjust the motor height relative to the ground. It incorporates integrated gauges of 0.5, 0.75, 1.00, and 1.25 mm for rigorous millimetre adjustments on the workbench.
Bearings

COMBI PLUS EVO bearing 29.5 mm.

Fabricante: Sloting Plus
Ref: SP053106
€8.00
The evolution of the reference bearing from Sloting Plus: the COMBI PLUS EVO 29.5 mm. combines high-quality duraluminium and brass to minimise friction, gain traction on the rear axle, and shave tenths off each lap. Suitable for 3D chassis and NSR or compatible triangular mounts.
Carrocería Scaleauto lista para decoración y montaje.
In Stock
Body shell

LMBH Supertrofeo Evo2 body -white- SC-3642

Fabricante: Scaleauto
Ref: SC-3642
€28.00
Official Scaleauto body of the LMBH Supertrofeo Evo2 in full white finish, ready to paint and customise. Direct fit onto the corresponding chassis, aerodynamic lines true to the original and optimised weight for competition in GT and Endurance categories at 1/32 scale.
Herramientas

Spare parts set for motor tester head and clips

Fabricante: Scaleauto
Ref: SC-5069I
€2.96
Original Scaleauto spare parts for the measurement head and the motor tester contact clips. Maintain the reliability of your readings by replacing worn components with parts specifically designed for this equipment.
vista del Skoda Fabia Rally2 decoración Cohete Suárez Ourense.
Last items in stock
Modern Rally

Skoda Fabia Rally2 Rally Ourense 2024 n1 J.A. Suarez R Version

Fabricante: Scaleauto
Ref: SC-6445R
€87.95
Official R-Version replica of the Skoda Fabia Rally2 with which J.A. "Cohete" Suárez competed in the Ourense Rally 2024. Soft grey in-flex chassis, SC-0027 motor with 18,000 rpm, RT3 mount with –0.5 mm offset and 8/31 transmission on hardened steel axles: all designed to run fast from the first stage.
mitsubishi-evo-vi-omv-scaleauto-sc-6370r-mecanica.jpg
Last items in stock
Classic Rally

Mitsubishi Evo VI OMV Rally Monte Carlo 2000 no. 21 Stohl / Muller

Fabricante: Scaleauto
Ref: SC-6370
€68.00
1/32 scale reproduction of the Mitsubishi Lancer Evo VI OMV nº21 of Manfred Stohl and Peter Müller in the 2000 Monte Carlo Rally, winners of Group N. Exterior detail faithful to the original and Scaleauto chassis designed for great stability on track.
Vista superior del tester de motores con pantalla digital y adaptadores universales.
Out-of-Stock
Herramientas

Universal motor tester with RPM reading.

Fabricante: Scaleauto
Ref: SC-5069A
€99.95
Real data before each race: the SC-5069A tester from Scaleauto measures revolutions per minute and current consumption in virtually any slot car motor, with adjustable voltage and universal adapters included.
Motor tester with RPM Scaleauto SC-5069B
Last items in stock
Herramientas

Motor tester with RPM reading. DELUX with all adapters.

Fabricante: Scaleauto
Ref: SC-5069B
€119.95
Scaleauto workshop tool for the professional running-in of slot motors. Real-time digital RPM reading, universal adapters included, and portable design: everything you need to get the most out of each motor before hitting the track.
Chasis Scaleauto SC-9100H para Ferrari 512S
Last items in stock
3D chassis, Fibre, Metal..

Scaleauto SC-9100H EVO3 chassis for Ferrari 512S and RT3 mounts

Fabricante: Scaleauto
Ref: SC-9100H
€7.92
The SC-9100H chassis from Scaleauto upgrades your Ferrari 512S to the EVO3 standard, with full compatibility for RT3 motor mounts. A technical foundation that transforms track performance and unleashes the full potential of the model.
Chasis Scaleauto SC-9100G Lola T70
Last items in stock
3D chassis, Fibre, Metal..

SC-9100G chassis for Lola T70 - EVO3 performance

Fabricante: Scaleauto
Ref: SC-9100G
€7.92
Transform your Fly Lola T70 into a competition machine with the SC-9100G chassis from Scaleauto. Designed to EVO3 standards and compatible with RT3 mounts, it allows for Sidewinder, Inline, and Anglewinder configurations for radically superior track performance compared to the original.
Pack Herramientas Slot PRO - Edición Especial Día del Padre
  • On sale!
  • -12%
  • Pack
Out-of-Stock
OFFERS

Slot PRO Tool Pack

Fabricante: Scaleauto
Ref: Packherramienta
€158.83 €180.49
Everything a serious slot car preparer needs gathered in a single pack: torque screwdrivers, universal press and extractor, competition lubricants, diamond files, pro reamer, and organisation boxes. Handpicked tools to ensure every adjustment on the bench counts.
Pack Pro-Performance Rally: Toyota Yaris Rally2 Monster + Chasis + repuestos
  • On sale!
  • -12%
  • Pack
Out-of-Stock
€156.57 €177.92
Competition slot pack designed for the demanding driver: Toyota Yaris Rally2 Monster "Monte Carlo 2025" body from Avant Slot on a 3DP Extreme ASA chassis with Anglewinder mechanics, 21,000 rpm motor, 4x4 belt drive, and Urano EVO II wheels. All set to adjust, fine-tune, and win.
FLY EVO3 Ford GT40 Chassis RT3 Supports | SC-9100F
Last items in stock
3D chassis, Fibre, Metal..

FLY EVO3 chassis Ford GT40 for RT3 Motor Mounts

Fabricante: Scaleauto
Ref: SC-9100F
€7.92
High competition chassis Scaleauto EVO3 designed to replace the original base of the Ford GT40 from Fly and integrate the motor mounts RT3. Technical plastic with controlled flex, front axle adjustment and compatibility with inline, sidewinder or anglewinder configurations.
Body Screws 4mm Head 4.3mm M2 | Scaleauto
Last items in stock
bench-mounted

Screws for 4mm Bodies with 4.3mm Head. M2

Fabricante: Scaleauto
Ref: SC-5138
€4.00
Scaleauto M2 screws designed for body adjustment in competition slot cars. With a length of 4 mm and a head diameter of 4.3 mm, they allow for the controlled lateral play that the body needs to absorb inertia without snagging and without protruding from the chassis.
Chasis FLY EVO3 Porsche 917k para Soportes de Motor RT3
Last items in stock
3D chassis, Fibre, Metal..

FLY EVO3 chassis Porsche 917k for RT3 Motor Mounts

Fabricante: Scaleauto
Ref: SC-9100E
€7.92
High competition chassis series EVO3 from Scaleauto, designed for Porsche 917k bodies and compatible with RT3 motor mounts. It allows inline, sidewinder or anglewinder configurations, with adjustable tilting and front axle height for significantly improved cornering performance compared to the original chassis.
Belts

MXL belt z57-2mm - 1 pc.

Fabricante: MITOOS
Ref: CXM457
€3.49
Mitoos MXL pitch timing belt, 57 teeth and 2 mm wide. Perfect fit with the entire range of Mitoos toothed pulleys —both plastic and aluminium— to transmit high revolutions without losing traction.
Correa MXL z50 2mm ancho - 1ud
Last items in stock
Belts

MXL belt z56-2mm - 1 pc.

Fabricante: MITOOS
Ref: CXM456
€3.49
Standardised MXL timing belt with 56 teeth and 2 mm width, compatible with the entire range of Mitoos toothed pulleys, both in plastic and aluminium. Lossless traction transmission at high revolutions, with guaranteed perfect fit.
Belts

MXL belt z59-2mm - 1 unit.

Fabricante: MITOOS
Ref: CXM459
€3.49
MXL pitch timing belt with 59 teeth and 2 mm width, designed by Mitoos to fit precisely with its entire range of toothed pulleys, both plastic and aluminium. Clean transmission and no loss of traction even at high revolutions.
Correa MXL z50 2mm ancho - 1ud
Last items in stock
Belts

MXL belt z58-2mm - 1 pc.

Fabricante: MITOOS
Ref: CXM458
€3.49
MXL z58 toothed belt, 2 mm wide, for high-revolution transmission between shafts. Perfect fit with Mitoos toothed pulleys, both in plastic and aluminium versions, without loss of traction.
Vista de la correa Mitoos M455 con ancho de 2 mm.
Last items in stock
Belts

Mitoos MXL z55 timing belt

Fabricante: MITOOS
Ref: CXM455
€3.49
Mitoos MXL z55 toothed belt with 55 teeth and 2 mm width for pulley drive systems in 1/32 slot cars. Direct power transfer, strong braking, and quiet running without the stretch typical of traditional rubber bands.
Plastic Chassis

LBH Supertrofeo Evo2 Medium Grey chassis

Fabricante: Scaleauto
Ref: SC-6686B
€7.92
The SC-6686B chassis from Scaleauto in medium hardness (grey) is designed to extract the maximum performance from the Lamborghini Huracán Super Trofeo Evo2 on track. It offers the right balance between controlled torsion and structural rigidity, facilitating constant traction and clean cornering on medium-high grip surfaces.
Mitsubishi Evo V Rally Monte Carlo 1999 Climent SC-6369R
Out-of-Stock
Modern Rally

Mitsubishi Evo V Rally Monte Carlo 1999 n28 Climent/Romani. R-Version AW

Fabricante: Scaleauto
Ref: SC-6369R
€87.92
The Mitsubishi Lancer Evo V that Luis Climent and Álex Romaní took to the class podium at Monte Carlo 1999 is now in 1/32 scale. This R-Version from Scaleauto combines an In-Flex R2.0 chassis, Anglewinder mechanics, and 4WD belt drive to deliver competitive performance from the very first metre.
Benches

3D motor mount compatible with NSR OFFSET 1.25 mm

Fabricante: Sloting Plus
Ref: SP610108
€6.72
Anglewinder chassis manufactured in 3D by Sloting Plus, compatible with the NSR standard and with an offset of 1.25 mm for the highest axle elevation available. It accommodates Monoblock bearings, ball bearings, and standard brass bushings, offering real versatility in the preparation of the rear end.
Soporte de motor 3D Sloting Plus compatible con NSR y offset 0,75 mm.
Last items in stock
Benches

3D motor mount compatible with NSR OFFSET 1 mm

Fabricante: Sloting Plus
Ref: SP610103
€6.72
Sloting Plus 3D anglewinder chassis compatible with the NSR standard and 1 mm offset. Lowers the car's centre of gravity, improves corner stability, and accommodates brass bearings and the COMBI PLUS system. A precision reference for competition preparation.
Soporte de motor 3D Sloting Plus compatible con NSR y offset 0,75 mm.
Last items in stock
Benches

3D motor mount compatible with NSR OFFSET 0.75 mm

Fabricante: Sloting Plus
Ref: SP610102
€6.72
3D printed anglewinder chassis, compatible with the NSR standard and with a 0.75 mm offset that raises the rear axle relative to the motor, lowering the centre of gravity. It accepts standard brass bearings and the COMBI PLUS system from Sloting Plus for perfect axle alignment.
Set de tornillos Scaleauto M2 de 6mm con cabeza ancha azul.
Out-of-Stock
For bench

Screws for 6mm Bodies with 4.3mm Head (M2)

Fabricante: Scaleauto
Ref: SC-5138B
€4.00
M2 metric screws of 6mm with an oversized head of 4.3mm in blue anodised finish from Scaleauto. Designed for precise adjustment of body tilt on competition slot car chassis, with a wide bearing surface that prevents the screw from slipping through the chassis hole.
3D chassis, Fibre, Metal..

3DP Chassis LB Super Trofeo Evo 2 for RT4 Motor Mount

Fabricante: Scaleauto
Ref: SC-9123B20
€14.32
Chassis manufactured using SLS 3D printing (laser sintered polyamide) designed by Scaleauto for the LB Super Trofeo Evo 2. Optimised for the RT4 motor mount at 12°, it combines ultra-thin walls, vibration absorption, and precision anchoring points to maximise performance on track.
Vista superior de las cuatro rectas estándar Pro Track Scaleauto SC-10001.
Out-of-Stock
Circuits

Standard Straight 400mm Pro Track (4 units)

Fabricante: Scaleauto
Ref: SC-10001
€47.92
Four standard 400mm Pro Track straight sections from Scaleauto to build or expand speed sections with guaranteed conductivity, grip, and precision in fitting. The foundation on which the best tracks are built.
Soporte motor 3D Sloting Plus SP610107 compatible con NSR OFFSET 1 mm.
Last items in stock
Benches

3D motor mount compatible with NSR OFFSET 1 mm. SP610107

Fabricante: Sloting Plus
Ref: SP610107
€6.72
3D motor mount from Sloting Plus with a 1 mm offset, monoblock construction and full compatibility with NSR mounts. It lowers the centre of gravity of the chassis and accommodates ball or brass bearings from the Compi Plus range.
Soporte motor 3D Sloting Plus SP610105 compatible con NSR OFFSET 0,50 mm.
Last items in stock
Benches

NSR compatible 3D motor mount OFFSET 0.50 mm. SP610105

Fabricante: Sloting Plus
Ref: SP610105
€6.72
Monoblock motor mount manufactured in 3D by Sloting Plus, with an offset of 0.50 mm and full compatibility with NSR type anglewinder mounts. It accepts ball bearings or brass bushings and provides structural rigidity to enhance chassis stability on track.
AW RT3 Motor Mount Offset 0.0mm Hard (Red) SC-6542
In Stock
Anglewinder

AW RT3 Motor Mount Offset 0.0mm hard (red)

Fabricante: Scaleauto
Ref: SC-6542
€9.52
Scaleauto anglewinder bracket for RT3 chassis in Hard hardness —red colour— with offset 0.0mm. Maintains the motor-axle geometry completely stable under any load, providing a linear and balanced traction response for demanding 1/32 slot racing.
tornillo-allen-M2-5x3mm-scaleauto-SC-5137.jpg
Out-of-Stock
1/32 spare parts

M2.5x3mm Allen screw for wheels, stoppers and crown gears SC-5137

Fabricante: Scaleauto
Ref: SC-5137
€1.92
The SC-5137 is the M2.5x3mm Allen screw from Scaleauto designed to secure wheels, stoppers, and crown gears onto 2.38mm axles. Made of high-strength steel, it features an exact M2.5 thread and a compact hexagonal head that does not interfere with the chassis. A small spare part with a decisive role in the reliability of the rear end.
llanta-aluminio-scaleauto-16-9x8-5mm-lightweight-SC-4048F25.jpg
Last items in stock
Aluminium

Aluminium Wheel 16.9x8.5mm. Lightweight for Axles 2.38mm

Fabricante: Scaleauto
Ref: SC-4048F25
€6.72
Scaleauto machined aluminium wheel in Lightweight format (1.15g), with dimensions 16.9x8.5mm and M2.5 screw fixation. Designed for 2.38mm axles, it reduces rotational mass and improves acceleration and cornering response in 1/32 slot racing.
Scaleauto SC-18 Slim Can Motor 25000 RPM | Shaft 1.5mm
Last items in stock
Motors

Scaleauto SC-18 Slim Can Motor - 25000 RPM (Shaft 1.5mm)

Fabricante: Scaleauto
Ref: SC-0018B
€10.40
Narrow format and uncompromising performance. The SC-18 from Scaleauto is a Slim Can motor with 25,000 rpm at 12V, torque of 82 gr*cm, 1.5 mm shaft, and sealed end bell. The reference option for chassis that require a narrow motor without sacrificing acceleration or reliability lap after lap.
mitsubishi-evo-vi-omv-scaleauto-sc-6370r-mecanica.jpg
Out-of-Stock
Classic Rally

Mitsubishi Evo VI OMV Rally Monte Carlo 2000 no.21 Scaleauto 1/32

Fabricante: Scaleauto
Ref: SC-6370R
€87.92
The Mitsubishi Lancer Evo VI from the OMV team that competed in the 2000 Monte Carlo Rally arrives in 1/32 scale with everything needed to hit the track: R2.0 In-Flex chassis, SC-0027 motor with 18,000 rpm, hardened steel axles, and RT compound tyres. A R-Version from Scaleauto ready for club competition from the very start.
soporte-motor-scaleauto-sc-6541-aw-rt3-evo.jpg
Out-of-Stock
Anglewinder

AW RT3 Evo Offset Motor Mount -1.15mm extra hard (black)

Fabricante: Scaleauto
Ref: SC-6541
€9.52
Anglewinder Scaleauto RT3 Evo bracket with -1.15 mm offset in Extra Hard (black) hardness. Lowers the centre of gravity, stabilises the pinion-crown gear engagement and minimises torsion under high loads, turning any compatible chassis into a more precise and consistent racing tool.
Soporte Motor AW RT3 Offset -0.25mm Extra-Hard (Rojo) de Scaleauto - SC-6537C
In Stock
Anglewinder

AW RT3 Offset Motor Mount -0.25mm

Fabricante: Scaleauto
Ref: SC-6537C
€9.22
Scaleauto RT3 anglewinder motor mount with -0.25 mm offset to fine-tune the distance between pinion and crown gear in your 1/32 slot cars. A small adjustment that can make a difference in transmission and track performance.
soportes-carroceria-acero-scaleauto-sc-8169-lms-gt3.jpg
Last items in stock
For bench

Scaleauto LMS GT3 2016 Body Mounts Steel for Chassis SC-8003 (SC-8169)

Fabricante: Scaleauto
Ref: sc-8169
€7.92
Made of steel for the SC-8003 chassis, these LMS GT3 2016 body mounts from Scaleauto ensure a solid connection and precise tilting. An original spare part that makes a difference in demanding bench setups.
motor-sc-18-slim-can-25000rpm-frontal.jpg
Last items in stock
Motors

SC-18 motor at 25000rpm

Fabricante: Scaleauto
Ref: SC-0012B
€10.40
Slim Can format, 25,000 rpm at 12V and torque of 82 gr*cm: the SC-18 motor from Scaleauto fits where almost none can, without compromising on power or the stability required for competition. With a sealed endbell and a 1.5 mm shaft, ready to install and run.
Lexan Interior

Lexan interior for LBH Supertrofeo Evo2

Fabricante: Scaleauto
Ref: SC-6687
€4.00
Thermoformed Lexan cockpit for the Scaleauto LBH Supertrofeo Evo2. Reduces weight in the upper part of the car, promotes free tilting of the body and lowers the centre of gravity, with all the necessary space for the Anglewinder mechanics. Reference SC-6687.
Flexible Rubber Wing LMS GT3 1/24 Scaleauto SC-7923I
Last items in stock
1/24 bodies

Flexible Rubber Wing for LMS GT3 1/24

Fabricante: Scaleauto
Ref: SC-7923I
€7.92
Flexible technical rubber wing from Scaleauto for LMS GT3 bodies in 1/24 scale. Designed to absorb impacts and immediately return to its original position, eliminating the typical breakages of conventional rigid wings.
Vista lateral detallada del BMW M-Hybrid V8 GTP #24
Last items in stock
Modern Le Mans

M-Hybrid GTP Watkins Glen 2023 n24 - Pro Anglewinder RT4

Fabricante: Scaleauto
Ref: SC-6383
€89.52
The BMW M-Hybrid V8 GTP of the BMW M Team RLL in the livery of no. 24 from the 6 Hours of Watkins Glen 2023, recreated by Scaleauto in 1/32 scale. Anglewinder motor SC-0029 at 22,500 rpm, RT4 pod, soft In-flex chassis and RT tyres: competition performance straight out of the box.
Scaleauto SC-6421R Porsche 911 GT3 Herbert 24h Nürburgring
Last items in stock
Official 1/32 scale reproduction of the Porsche 911 (992) GT3 R from the Herbert Motorsport team, number 5, in the 24h of Nürburgring 2024. The R Version from Scaleauto combines a collector's finish with competition mechanics: SC-0011 motor, anglewinder configuration, and aluminium rear wheels.
Coche de slot Porsche 911 RSR 3.0 dorsal 58 Gelo Racing Team
Last items in stock
Slot Cars

Porsche 911 RSR 3.0 24h Le Mans 1975 n58 Georg Loos - R Version

Fabricante: Scaleauto
Ref: SC-6121R
€79.95
1/32 scale reproduction of the Porsche 911 RSR 3.0 that Georg Loos entered in the 24h of Le Mans 1975 with the number #58. The R Version from Scaleauto combines historically accurate aesthetics with a factory-prepared anglewinder chassis for club racing.
Vista lateral y frontal 911 RS Gulf #709 Racing colors
Out-of-Stock
Modern GT

Porsche 911 RS Gulf n709 Historical Racing Colours - R Version

Fabricante: Scaleauto
Ref: SC-6123R
€79.92
A Porsche 911 RS with the legendary Gulf Oil livery and race number #709, ready to compete. The R Version from Scaleauto combines a top-level historical decoration with competition mechanics: a 20,000 rpm motor, Anglewinder configuration, and axles with bronze ball bearings to perform from the very first lane.
Skoda Fabia R5 Rally Catalunya 2015 Winner n44 - P. Tidemand - R Version
Out-of-Stock
Modern Rally

Skoda Fabia R5 Rally Catalunya 2015 Winner n44 - P. Tidemand - R Version

Fabricante: Scaleauto
Ref: SC-6442R
€87.92
Official 1/32 replica of the Skoda Fabia R5 #44 of Pontus Tidemand, winner of the WRC2 category at the Rally Catalunya 2015. The R Version from Scaleauto features the In-flex R2.0 chassis in soft version, SC-0027 motor at 18,000 rpm, and aluminium rear wheels: a mechanical base ready to be pushed to the limit on track.
scaleauto-sc6426-lbh-gt3-evo2-white-kit.jpg
In Stock
Modern GT

LBH GT3 Supertrofeo Evo2 White Racing Kit - Anglewinder.

Fabricante: Scaleauto
Ref: SC-6426
€60.72
1/32 competition kit with unpainted GT3 Supertrofeo Evo2 body, R2.0 In-flex soft chassis assembled in Anglewinder configuration, SC-0011c motor with 20,000 rpm, RT3 bracket with -1 mm offset, aluminium rear wheels and hardened steel axles. The perfect base for customisation and winning.
aleron-goma-flexible-scaleauto-sc3630a22.jpg
In Stock
Body parts

Flexible Rubber Wing for LBH Supertrofeo Evo2

Fabricante: Scaleauto
Ref: SC-3630A22
€6.32
Replacement flexible rubber rear wing from Scaleauto for the LBH Supertrofeo Evo2. It absorbs impacts and returns to its original shape, extending the life of one of the most exposed areas of the body during racing.
Procomp3 Wheel 27.5x13mm Rim ø21 Axle 3mm SC-2421P
Last items in stock
Wheels and tyres

Wheel Esp. 27.5x13mm. Procomp3 for 3mm Axle. Rim ø21 and M3 Screw.

Fabricante: Scaleauto
Ref: SC-2421P
€14.50
Complete Scaleauto SC-2421P wheels with Procomp3 foam compound and aluminium rim ø21mm for 3mm axles. Size 27.5x13mm with fixation via M3 screw, designed to perform at the highest level in 1/24 slot racing on wooden or plastic tracks.
llanta-aluminio-sc-4091d25-air-monza-2-slot.jpg
Out-of-Stock
Aluminium

Aluminium Wheel 16.5x10mm. AIR Monza-2 for Axle 3/32 with M2.5 Screw.

Fabricante: Scaleauto
Ref: SC-4091D25
€11.92
Precision and lightness in a single piece: the Air Monza-2 aluminium wheel from Scaleauto offers dimensions of 16.5x10 mm, attachment via M2.5 screw, and a weight of only 1.10 g. Designed for 3/32" axles, it is the natural choice when looking to reduce unsprung mass without compromising structural rigidity.
NSX GT3 24h Daytona 2020 #86 R Version SC-6348R
Last items in stock
Modern GT

H. NSX GT3 24h Daytona 2020 n86 - R Version

Fabricante: Scaleauto
Ref: SC-6348R
€79.92
1/32 scale slot replica of the Honda NSX GT3 that raced in the 24h of Daytona 2020 with the number #86. The R Version from Scaleauto comes track-ready with a long can motor SC-0011 at 20,000 rpm, Anglewinder configuration, rear wheels in aluminium, and bronze spherical bearings.
Llanta 15,9 x 8,5 mm. URANO EVO II
Out-of-Stock
Magnesium

Wheel 15.9 x 8.5 mm. URANO EVO II

Fabricante: Sloting Plus
Ref: SP022510
€12.75
Urano EVO II wheels from Sloting Plus in dimensions 15.9 x 8.5 mm. Machined from technical aluminium by CNC with minimal tolerances, they offer perfect centring, lightweight core, and M2.5 set screw. Set of 2 units designed for those competing in 1/32 categories where every tenth of a gram matters.
sc-6269-formula-90-97-blanco-azul-amarillo-morro-bajo-slot-1-32.jpg
  • On sale!
  • -€3.60
Last items in stock
F1

Formula 90-97 White/Blue/Yellow 1990 No.6 low nose

Fabricante: Scaleauto
Ref: SC-6269
€76.30 €79.90
1/32 scale slot car replica of the single-seater No.6 from the 1990 season in striking White/Blue/Yellow livery. Low-nose design, 0.65 mm body, high-torque SC-0025b motor, and components made of Ergal and aluminium for serious competition. Ready to race from the very first moment.
scaleauto-sc-6134-srt-viper-gts-r-white-racing-kit-chasis-r2-in-flex.jpg
  • On sale!
Last items in stock
Modern GT

SRT Viper GTS-R White Racing Kit with R2.0 In-Flex Chassis.

Fabricante: Scaleauto
Ref: SC-6134
€46.42
The Scaleauto SRT Viper GTS-R white kit (SC-6134) gives you the freedom to decorate and compete: unpainted body ready for customization, fully assembled soft R2.0 In-Flex chassis with SC-0011B motor, RT3 Offset mount, and 11/27d transmission calibrated for the GT 1/32 category.
scaleauto-sc-1724a-polea-dentada-14d-aluminio-azul-eje-3-32.jpg
Last items in stock
Pulleys

14-tooth Pulley for 1.8mm belt. Shaft 3/32 with M2 screw.

Fabricante: Scaleauto
Ref: sc-1724a
€5.75
14-tooth pinion from Scaleauto (SC-1724A) for 1.8 mm belts and 3/32" axle. Made from blue anodised aluminium with M2 screw fixation, it ensures precise and slip-free 4x4 transmission in 1/32 and 1/24 scale models.
Steel

14t pinion. Steel for 2mm axle. ø7.50m x 2.5mm

Fabricante: Scaleauto
Ref: sc-1124b75
€4.72
14-tooth pinion made of steel by Scaleauto (Ref. SC-1124b75) for a 2mm axle and a diameter of 7.50mm x 2.5mm wide. A precision-machined spare part that offers reliable transmission and wear resistance far superior to plastic pinions.
Ergal

11-tooth pinion. Ergal. Ø5.5mm for 2mm axle.

Fabricante: Scaleauto
Ref: SC-1094E55
€4.72
The Scaleauto SC-1094E55 11-tooth pinion made of Ergal alloy reduces weight in the transmission and improves motor response at every start. Precision machined, diameter 5.5mm and direct fit on 2mm axles for 1/32 competition setups.
Porsche 911 Carrera RS 2.7 Body Kit White SC-3617
Last items in stock
Body shell

Porsche 911 Carrera RS 2.7 Body Shell in White Kit

Fabricante: Scaleauto
Ref: SC-3617
€28.00
White body kit in 1/32 scale of the iconic Porsche 911 Carrera RS 2.7 from Scaleauto (ref. SC-3617). A perfect canvas for customising with your own decoration, with optics, windows, and mounting accessories included.
Porsche 911 RSR 3.0 White Body Kit SC-3618
Last items in stock
Body shell

Porsche 911 Carrera RSR 3.0 Body Shell White Kit

Fabricante: Scaleauto
Ref: sc-3618
€28.00
White body kit of the iconic Porsche 911 Carrera RSR 3.0 in 1/32 scale from Scaleauto, reference SC-3618. Perfect base to apply your own decoration, with all the necessary accessories to complete the model accurately and a reduced weight that enhances track performance.
Steel body support R8 LMS GT3 SC-8124 | Scaleauto
Last items in stock
1/24 bodies

Steel body support R8 LMS GT3

Fabricante: Scaleauto
Ref: SC-8124
€6.80
Original Scaleauto spare part (ref. SC-8124) made of high-strength steel for the Audi R8 LMS GT3 in 1/24 scale. Photoetched Photoedge design that ensures a precise fit between chassis and body, reducing torsions and improving dynamic performance on track.
Pro Steel Axle Scaleauto 2.38mm x 60mm SC-1212
Last items in stock
Steel

Pro steel axle 2.38mm x 60mm

Fabricante: Scaleauto
Ref: SC-1212
€3.44
Competition precision in every millimetre. The Pro Scaleauto SC-1212 steel axle of 2.38 mm (3/32") x 60 mm offers absolute straightness and a calibrated surface to eliminate vibrations in 1/32 slot car transmissions, with universal compatibility in bearings, crown gears, and standard 3/32" wheels.
Flexible Rubber Wing LMS GT3 2016 1/24 SC-7923A
Out-of-Stock
1/24 bodies

Flexible Rubber Wing for LMS GT3 2016 1/24

Fabricante: Scaleauto
Ref: SC-7923A
€7.92
The rear wing is the most vulnerable part in 1/24 scale. This replacement from Scaleauto made of flexible technical rubber absorbs impacts and returns to its original shape, preventing breakages and preparing your LMS GT3 2016 for long uninterrupted racing sessions.
Ergal

9d pinion. Ergal. ø5.5mm for 2mm axle

Fabricante: Scaleauto
Ref: SC-1092E55
€4.72
9-tooth pinion made of Ergal by Scaleauto (SC-1092E55): diameter 5.5 mm, shaft of 2 mm. The high-strength aluminium alloy reduces rotational mass and improves acceleration response on twisty circuits. Precision machined for a quiet and durable mesh with the crown gear.
1/24 Spare Parts

Pro Steel Axle 3x60mm. Ground and calibrated hollow

Fabricante: Scaleauto
Ref: SC-1250B
€4.00
Two hollow steel axles, ground and calibrated with a diameter of 3mm and a length of 60mm, designed by Scaleauto for professional assemblies in 1/24 scale. They reduce rotational mass, minimise vibrations, and ensure a clean power transmission in every corner.
Scaleauto Sidewinder crown gear 33d M50 axle 2.38mm SC-1143R
Last items in stock
Cross crowns

33d crown. Sidewinder M50 for axle 2.38mm O18.5mm screw M2.5

Fabricante: Scaleauto
Ref: SC-1143R
€4.43
Scaleauto cross crown gear with 33 teeth (SC-1143R), M50 module and diameter of 18.5mm, designed for Sidewinder configurations with a 2.38mm (3/32") axle. Includes M2.5 Allen screw for a firm and vibration-free attachment, ideal for fine-tuning the gear ratio on technical circuits.
Bronze

8d pinion. Ergal ø5.5mm for 2mm axle.

Fabricante: Scaleauto
Ref: SC-1091E55
€4.72
8-tooth pinion made of Ergal, with an outer diameter of 5.5 mm and suitable for a 2 mm shaft. A precision piece from Scaleauto designed for 1/32 slot car transmissions that require low weight and good mechanical response.
Guardrail Type 3 Red-White SC-10122 Scaleauto
Last items in stock
Diorama

Guardrail type 3 rail (red-white)

Fabricante: Scaleauto
Ref: SC-10122
€8.80
Five Type 3 Rail guardrails in striking red-white combination from Scaleauto to add competition realism to your 1/32 slot diorama. Flexible material that absorbs impacts, high visibility on track, and easy installation.
R8 GT2 LP team Xseven n67 Fanatec GT series 2023 - R chasis-
Out-of-Stock
Modern GT

R8 GT2 LP team Xseven n67 Fanatec GT series 2023 - R chassis -

Fabricante: Scaleauto
Ref: SC-6424R
€79.90
Official 1/32 scale replica of the Audi R8 GT2 LP from Team Xseven #67 in the Fanatec GT Series 2023. The R version from Scaleauto (SC-6424R) comes ready to race with an SC-0011 motor at 20,000 rpm in Anglewinder configuration, spherical bronze bearings, and aluminium rear wheels.
Audi R8 GT2 Team WRT #25 Blancpain 2019 SC-6423R
Out-of-Stock
Modern GT

R8 GT2 Team WRT GT sport club n25 Blancpain 2019

Fabricante: Scaleauto
Ref: SC-6423R
€79.90
1/32 scale replica of the Audi R8 GT2 Team WRT #25 from the Blancpain GT Sport Club 2019, in the R-Version by Scaleauto: SC-0011 Anglewinder motor at 20,000 rpm, RT3 chassis, aluminium wheels, bronze spherical bearings, and SC-1608 forward guide. Ready to race from the first lane.
Scaleauto SC-6408 Porsche 963 GTP Hertz 6H Austin 2024
Out-of-Stock
Modern GT

P. 963 GTP Hertz 6H Austin 2024 n38 - Pro Anglewinder RT4

Fabricante: Scaleauto
Ref: SC-6408
€89.52
The Porsche 963 GTP from the Jota Hertz team #38 arrives in Pro Anglewinder RT4 version from Scaleauto: grey In-Flex chassis, 22,500 rpm motor, aluminium rear wheels, and high-grip RT tyres. A 1/32 replica designed as standard for club racing and endurance on Sport track.
Scaleauto MP4/10 1995 #8 Häkkinen Morro Alto SC-6343
Last items in stock
F1

Formula 90-97 MP4/10 1995 N8 Hakinn. - High Nose

Fabricante: Scaleauto
Ref: SC-6343
€82.95
1/32 scale reproduction of the 1995 McLaren MP4/10 with the number #8 of Mika Häkkinen, in High Nose version. Part of the Formula 90-97 series by Scaleauto, this single-seater comes fully finished (Ready To Run) with an ultra-light body, precision mechanics, and everything necessary for high competition on Sport track.
Scaleauto F1 MP4/10 1995 #7 Blundell SC-6342
Last items in stock
F1

Formula 90-97 MP4/10 1995 n7 Blundell - High Nose

Fabricante: Scaleauto
Ref: SC-6342
€82.95
1/32 scale reproduction of the 1995 McLaren MP4/10 with the #7 of Mark Blundell, in the High Nose version of the Formula 90-97 series by Scaleauto. Ready to race from the first moment, featuring an SC-0025C motor with 21,500 rpm, an ultra-lightweight body of 0.65 mm, and Supergrip tyres for club competition.
Magnesium

URANO EVO II wheel 16.5 x 10 mm

Fabricante: Sloting Plus
Ref: SP022520
€12.75
Two Sloting Plus Urano EVO II wheels of 16.5 x 10 mm in lightweight technical aluminium, CNC machined for perfect concentricity. Fixed by M2.5 set screw and compatible with 2.38 mm (3/32") axles. A solid reference for competition setups in 1/32.
1/32 spare parts

3D cover for bearing

Fabricante: Sloting Plus
Ref: SP399920
€1.28
Secure and protect the rear axle bearings with this cap made from technical plastic using 3D printing. The kit includes 2 units and complete screws for assembly. Compatible with most Sloting Plus motor mounts.
Controllers and power supplies

PRO R-II controller for Two Fingers

Fabricante: Sloting Plus
Ref: SP130039
€198.00
Redesigned trigger for two fingers, new high-speed microcontroller and protected front curve selector: the PRO R-II from Sloting Plus takes the electronic control of your slot car to another level, both in tight corners and on fast tracks.
PRO R-II mando 100% electrónico
Last items in stock
Controllers and power supplies

PRO R-II one-finger controller

Fabricante: Sloting Plus
Ref: SP130038
€198.00
The Sloting Plus PRO R-II takes electronic control to the next level: new software, improved sensor, and redesigned trigger for one finger. Greater smoothness in medium and wide radius corners, re-tuned traction, and the characteristic "kick" of the PRO controllers. An evolution designed for the demanding driver.
Lite-Evo Mando 100% electrónico
Out-of-Stock
Controllers and power supplies

Lite-Evo 100% electronic controller

Fabricante: Sloting Plus
Ref: SP130021
€99.00
The Lite-Evo from Sloting Plus is the 100% electronic controller designed for those starting in slot racing without compromising on performance. With 8 power curves, 4 braking levels, and a magnetic trigger, it offers precise, intuitive control adaptable to any track between 8 V and 22 V.
Showing 1-100 of 1395 item(s)

Bienvenido a Ministry of Hobby, tu tienda de referencia para todo lo relacionado con el mundo del hobby a escala. Si llevas años en esto o acabas de descubrir el placer de coleccionar, preparar o competir con miniaturas, aquí vas a encontrar algo más que productos: vas a encontrar criterio, especialización y una selección pensada por y para aficionados de verdad.

Nuestro catálogo abarca disciplinas muy distintas, pero todas comparten algo: la atención al detalle, la pasión por lo pequeño y la satisfacción de tener en la mano —o en la pista— algo bien hecho. Desde coches slot listos para competir hasta miniaturas diecast de colección, pasando por pinturas, aerógrafos, herramientas de taller, repuestos técnicos y todo lo necesario para el modelismo estático, figuras y dioramas. Un universo amplio con una filosofía común.

Este es el punto de partida de tu visita. A partir de aquí puedes explorar por categorías, por marca o por la disciplina que más te apasione. Si tienes dudas, nuestro equipo conoce el producto de primera mano y puede orientarte sin rodeos. Porque no hay nada peor que comprar algo que no encaja con lo que necesitas.

Qué encontrarás en Ministry of Hobby

El catálogo está organizado en grandes áreas que responden a las necesidades reales de cada tipo de aficionado. No mezclamos todo en un cajón: cada sección tiene profundidad real, con referencias seleccionadas y actualizadas.

Slot

El mundo del slot es mucho más amplio de lo que parece desde fuera. Aquí trabajamos con coches de competición en escalas 1/32 y 1/24, repuestos técnicos para preparación y reglaje, pistas y electrónica, y todo el equipamiento necesario para correr en casa o en club. Marcas como NSR, Slot.it, Avant Slot, Scaleauto, Scalextric o Ninco tienen presencia con catálogos trabajados. Si buscas un coche de caja para estrenar o un motor específico para mejorar tu montura de competición, esta es tu sección.

Diecast y coleccionismo

Las miniaturas diecast son otra forma de vivir el hobby: sin pistas, sin preparaciones, con el foco puesto en el detalle, la escala y el valor coleccionista. Trabajamos con diferentes escalas —desde 1/18 hasta 1/64— y con criterio para seleccionar modelos que realmente merezcan un hueco en tu vitrina. Coches de competición históricos, modelos de carretera clásicos, ediciones limitadas... hay mucho donde elegir.

Modelismo, maquetas y figuras

El modelismo estático, las figuras y los dioramas tienen un espacio propio y bien surtido. Pinturas acrílicas de marcas como Vallejo, Tamiya, Kaleido o Ammo; aerógrafos para todos los niveles; herramientas de precisión; calcas; masillas; bases y materiales para dioramas. Una sección pensada tanto para quien empieza como para quien ya tiene una técnica desarrollada y busca materiales específicos.

Taller y mantenimiento

Un buen aficionado cuida su material. En esta área encontrarás lubricantes, limpiadores, herramientas de taller, productos de acabado y todo lo necesario para mantener tus coches, maquetas y miniaturas en perfecto estado. Pequeños detalles que marcan la diferencia entre una pieza que dura años y una que se deteriora por falta de cuidado.

Cómo está organizado el catálogo

Hemos estructurado la tienda para que sea fácil encontrar lo que buscas, tanto si sabes exactamente qué quieres como si estás explorando. Puedes navegar por disciplina, por tipo de producto o directamente por marca. Las fichas de producto incluyen información técnica real: compatibilidades, características, orientación de uso. No llenamos las descripciones de palabras vacías.

Si en algún momento no encuentras algo o tienes dudas sobre qué producto se adapta mejor a tu caso, puedes contactarnos directamente. Preferimos orientarte bien antes de que compres algo que luego no te encaje.

Por qué comprar aquí y no en cualquier otro sitio

Esta es una pregunta legítima. La respuesta honesta es que Ministry of Hobby no es una tienda generalista que vende de todo. Es una tienda especializada, con un equipo que conoce el catálogo porque practica el hobby. Eso tiene consecuencias concretas:

  • Selección con criterio: no listamos todo lo que existe, sino lo que consideramos que tiene sentido recomendar.
  • Información técnica fiable: las descripciones, compatibilidades y consejos que lees están revisados por personas que entienden el producto.
  • Asesoramiento real: si tienes una duda técnica, no recibirás una respuesta de catálogo. Te diremos lo que sabemos con franqueza.
  • Comunidad y contexto: entendemos el ecosistema del hobby —clubs, competiciones, tendencias, novedades— y eso se nota en cómo trabajamos.

Para quién es Ministry of Hobby

Para el aficionado al slot que lleva años preparando coches y quiere repuestos de calidad y buena información técnica. Para quien acaba de descubrir el mundo del diecast y no sabe por dónde empezar. Para el modelista que busca pinturas concretas o un aerógrafo nuevo. Para el coleccionista que quiere ampliar su vitrina con criterio. Y también para quien regala: aquí encontrarás opciones bien explicadas que facilitan elegir sin miedo a equivocarse.

No importa en qué punto del hobby estés. Lo importante es que encuentres aquí lo que necesitas —o que te ayudemos a encontrarlo.

Preguntas frecuentes

¿Qué disciplinas cubre Ministry of Hobby?

Cubrimos slot (coches, repuestos, pistas y electrónica), diecast y coleccionismo a escala, modelismo estático, figuras y dioramas, y todo el taller y materiales de pintura y acabado asociados a estas disciplinas.

¿Puedo encontrar tanto productos para principiantes como para usuarios avanzados?

Sí. El catálogo tiene productos para todos los niveles. En las fichas y en nuestras descripciones solemos indicar para qué perfil está más orientado cada producto, para que puedas elegir con criterio.

¿Trabajáis con las marcas más importantes del sector slot?

Trabajamos con NSR, Slot.it, Avant Slot, Scaleauto, Scalextric, Ninco y otras marcas de referencia, tanto en coches como en repuestos y electrónica.

¿Qué sistemas de pista slot tenéis disponibles?

Tenemos pistas y accesorios para los principales sistemas del mercado. Es importante saber que el carril universal es compatible con marcas como Scalextric y Ninco, mientras que el carril sport lo usan Scaleauto y Slot.it, entre otras. Si tienes dudas sobre compatibilidades, consúltanos antes de comprar.

¿Las pinturas y materiales de modelismo sirven solo para slot?

No. La sección de pinturas, aerógrafos y materiales de acabado está pensada para todo el modelismo: coches slot, maquetas estáticas, figuras y dioramas. Marcas como Vallejo, Tamiya, Kaleido o Ammo sirven para cualquiera de estas disciplinas.

¿Puedo pedir consejo antes de comprar?

Por supuesto. Puedes contactarnos por los canales disponibles en la tienda. Nuestro equipo conoce el catálogo de primera mano y puede orientarte sin compromiso.

¿Tenéis novedades frecuentes en el catálogo?

Sí. Actualizamos el catálogo con regularidad en función de las novedades de las marcas y la demanda de los aficionados. Si hay algo que buscas y no encuentras, consúltanos.

¿Qué diferencia hay entre un coche slot y una miniatura diecast?

Un coche slot está diseñado para circular sobre una pista con carril, tiene motor, guía y trencillas. Una miniatura diecast es un modelo de colección estático, fabricado generalmente en metal a presión, pensado para exhibirse. Son mundos distintos aunque comparten la pasión por las miniaturas a escala.

¿Trabajáis con resinas en coches slot?

Sí. Marcas como Avant Slot producen carrocerías en resina a nivel industrial para el mundo slot, con un nivel de detalle y acabado superior al plástico estándar. Las tenemos disponibles en nuestro catálogo.

¿Qué escala es más habitual en slot?

La escala 1/32 es la más extendida en el mundo del slot, tanto en uso doméstico como en competición. La escala 1/24 es más grande y habitual en competición avanzada o en coches de mayor detalle. En diecast, las escalas más comunes van desde 1/18 hasta 1/64, cada una con sus particularidades.

Product added to wishlist

Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Para dar su consentimiento sobre su uso pulse el botón Acepto.

Contáctanos por Whatsapp